Investigation of the relationships between the chain organization and rheological properties of atactic poly(vinyl alcohol) hydrogels

The structure and rheological behavior of atactic poly(vinyl alcohol) (a-PVA) hydrogels prepared by freeze/thaw cycles were investigated as a function of polymer concentration and number of freeze/thaw cycles. The presence of phases with different mobilities was observed using ¹³C CP/MAS and DP/MAS NMR experiments. The degree of crystallinity of the a-PVA-rich phase was determined by ¹H NMR free decay experiments. Measurements of the shear storage and loss modulus were performed at a fixed frequency of 1 Hz and a strain value of 0.1%, i.e. under conditions where the deformation imposed on the gel structure is entirely reversible. Results thus obtained showed that an increase in the number of freeze/thaw cycles induces an increase in the degree of crystallinity in the polymer-rich phase together with an increase in the storage modulus. The a-PVA hydrogels became more fragile as the number of freeze/thaw cycles was increased. Moreover, both the percentage of protons in a rigid environment measured by ¹H NMR and the storage modulus values tended to a limiting value after six freeze/thaw cycles. These results show that the first five or six freeze/thaw cycles play a very important role in determining the hydrogel structure and rheological properties. A more detailed comparison of NMR and rheological data led to the conclusion that the storage modulus is mainly controlled by the a-PVA crystallinity while the hydrogen bond interactions have a much smaller contribution.     

Characterization and structural integrity tests of ex-service steam generator tubes at Ontario Power Generation

The Canadian Nuclear Standard CSA N285.4 requires the periodic metallurgical examination of removed ex-service steam generator tubes. This paper describes the practices used for the characterization and structural integrity tests of ex-service steam generator tubes at Ontario Power Generation (OPG). It shows that there is no degradation of mechanical properties of Monel 400 tubes after 7-18 effective full power years (EFPY) of operation and Incoloy 800 tubes after more than 10 EFPY of operation.     

Characterization and leachability of electric arc furnace dust made from remelting of stainless steel

Electric arc furnace dust (EAFD) is a toxic waste product made in the remelting of scrap steel. The results of a Toxicity Characteristic Leaching Procedure (TCLP) conducted on a sample of EAFD originating from the remelting of stainless steel scrap showed that the total Cr and Cr (VI) liquor concentrations (9.7 and 6.1 mg/L, respectively) exceeded the Toxicity Characteristic Regulatory Level (TCRL). The EAFD showed a complex heterogeneous mineralogy with spinel minerals group predominance. A sequential extractions method has permitted the determination of the amount of available metals (potentially mobile component) from the EAFD as follows: Cr (3%), Ni (6%), Pb (49%) and Zn (40%). Solubility controls on Cr, Pb, Zn and Ni were identified in the EAFD. This means that the Cr, Pb, Zn and Ni concentrations in solution were controlled by the solubility of some phases from EAFD. The concentrations of Ni and Zn, which are metals not regulated by TCRL were below 0.41 and 1.3 mg/L, respectively. The solubility control on Pb was sufficient to decrease its concentration (<0.24 mg/L) to a level below the TCRL. However, the control on Cr was not sufficient to decrease its concentration (between 117 and 331 mg/L) to below the TCRL.     

Evaluation of the degree of Cr ions immobilization by different binders

Disposal of industrial solid wastes can cause environmental risks due to the mobility of toxic elements. Stabilization/solidification (s/s) is an effective tool in the treatment of various wastes; however, there is a lack of chemical fixation on the concentrations of Cr. Thus, Cr, in particular Cr⁶⁺, remains free in the leachate. Some phases of the blast furnace slag seem to be able to exert a solubility control on chromium. This study evaluates the effect of various binders on the fixation of Cr ions. Static leaching tests were conducted at two different water-solid ratios as a means to distinguish elements that have solubility controls. The results show that Cr content decreases very quickly to obtain values near 0.03 ppm soon after the contact between the contaminated solution and the different binders. The sample containing only the slag was the most effective. Cr was evenly distributed in the C-S-H as detected by scanning electron microscope (SEM).     

Biomonitoring of the adverse effects induced by the chronic exposure to lead and cadmium on kidney function: usefulness of alpha-glutathione S-transferase

A successful prevention of renal diseases induced by occupational exposure to lead (Pb) and/or cadmium (Cd) largely relies on the capability to detect nephrotoxic effects at a stage when they are still reversible or at least not yet compromising renal function. Hence, the aim of this cross-sectional study was to evaluate the usefulness of a set of early biological markers of oxidative stress or nephrotoxicity for the biomonitoring of workers occupationally exposed to Pb and/or Cd in a non-ferrous metal smelter, and gender, age, socioeconomic status, smoking habits, and drug use-matched control individuals. In exposed subjects, mean levels of Pb in blood and urine were also 387.1+/-99.1 microg Pb/L (1.868+/-0.478 micromol Pb/L) and 217.7+/-117.7 microg Pb/g creatinine (1.051+/-0.568 micromol Pb/g creatinine), and mean levels of Cd in blood and urine were 3.26+/-2.11 microg Cd/L (0.029+/-0.019 micromol Cd/L) and 2.51+/-1.89 microg Cd/g creatinine (0.022+/-0.017 micromol Cd/g creatinine), suggesting thereby relatively low occupational exposure levels. Statistically significant variations in zinc protoporphyrin, malondialdehyde, retinol binding protein, alpha-glutathione S-transferase, and urinary protein levels were reported between the two groups, and were closely correlated with Pb and/or Cd exposure levels. Variations in alphaGST levels were closely associated with Pb exposure. Taken together, these results suggest the use of alpha-glutathione S-transferase excretion in urine as a hallmark of early changes in the proximal tubular integrity.     

MRI study of bread baking: experimental device and MRI signal analysis

An oven dedicated to a magnetic resonance imager (MRI) was designed and constructed for continuous monitoring of the entire baking process. The general aim was to test whether response variables conventionally measured on bread loaves, such as temperature, density, and water loss, were consistent with those reported for similar products baked in classical convection ovens. MRI images acquired during baking are presented and discussed, emphasising the need to develop quantitative MRI methods allowing conversion of the MRI signal into one variable of interest, such as local density or local water content.     

The geothermal zone of lake Assal (F.T.A.I.), geochemical and experimental studies

A geothermal model of Lake Assal region (F.T.A.I.) was derived from in situ observations and chemical and isotopic studies of hot and cold springs.According to this model, the lake water supply is provided mainly by sea water infiltrating from Ghoubbet el Kharab and, for a small part, by highly mineralized hot spring water of meteoric origin.Temperatures at depth were determined by means of various methods (among them a new one). These temperatures were found to range from 150 to 170°C.A geochemical experimental study of this model is under way.     

Le traitement cognitivo-comportemental du trouble de panique: une recension critique des écrits.

Reviews the mainly English-language clinical research and some studies by the present authors on the use of cognitive and behavioral procedures to treat panic disorder. Controlled studies and noncontrolled studies are considered. Use of relaxation, respiratory control, and exposure is discussed. (English abstract) (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Monitoring anticoagulant treatment with the KEM-O-MAT 2HP autoanalyzer

Synthetic chromogenic substrates were adapted to KEM-O-MAT 2HP for an automated monitoring of anticoagulant treatments, determination of factor X (S 2337) in oral anticoagulation, anti-Xa (Hepachrom) and anti-lla (S 2238) activities of heparin in prophylactic and curative heparin therapies. In all cases, these methods revealed high sensitivity, reproducibility, and a good correlation of their results with those of classical clotting assays. The present cost of synthetic substrates seriously limits the potential value of chromogenic assays for routine controls. However, the development of automated amidolytic techniques should provide an easier standardization in the laboratory control of anticoagulant treatments.     

Piezoelectric actuators and sensors location for active control offlexible structures

A method for optimal positioning of piezoelectric actuators and sensors on a flexible structure is presented. First, a two-dimensional (2-D) model of a piezoelectric actuator bonded to a plate is obtained. Then, a Ritz formulation is used to find a state model of the system in view of its control. To define an optimal positioning strategy, an energy based approach is developed. This leads quite naturally to the study of controllability and observability properties of the overall dynamical model. A new criterion based on energy assessment is proposed to locate actuators and sensors