Corrosion fatigue short crack growth behaviour in a high strength steel

The influence of an aggressive environment (0.6 M, aerated NaCl solution) on short fatigue crack initiation and growth behaviour has been studied. The study involved three major test series, namely: air fatigue, corrosion fatigue, and intermittent air fatigue/corrosion fatigue. The above tests carried out under fully reversed torsional loading conditions at a frequency of 5 Hz, showed that it was the non-metallic inclusions which took part in crack initiation resulting from debonding at metal matrix/inclusion interface and pitting of inclusions in both air and corrosove environments, respectively. Short fatigue crack growth results in these two environments obtained by using plastic replication technique, indicated a large effect of microstructure i.e. prior austenite grain boundaries. The stage/stages at which the environmental contribution was dominant has been discussed by considering the results achieved from intermittent tests. However, the mechanisms involved in corrosion fatigue short crack growth have also been described in the light of results obtained from futher investigations carried out by conducting corrosion fatigue tests under applied cathodic potential conditions and tests on hydrogen pre-charged specimens under air fatigue and uniaxial tension conditions.     

Efficient dissemination of personalized information using content-based multicast

There has been a surge of interest in the delivery of personalized information to users (e.g., personalized stocks or travel information), particularly as mobile users with limited terminal device capabilities increasingly desire updated and targeted information in real time. When the number of information recipients is large and there is sufficient commonality in their interests, as is often the case, IP multicast is an efficient way of delivering the information. However, IP multicast services do not consider the structure and semantics of the information in the multicast process. We propose the use of Content-Based Multicast (CBM) where extra content filtering is performed at the interior nodes of the IP multicast tree; this will reduce network bandwidth usage and delivery delay, as well as the computation required at the sources and sinks. We evaluate the situations in which CBM is advantageous. The benefits of CBM depend critically upon how well filters are placed at interior nodes of the IP multicast tree and the costs depend upon those introduced by filters themselves. Further, we consider the benefits of allowing the filters to be mobile so as to respond to user mobility or changes in user interests and the corresponding costs of filter mobility. The criterion that we consider is the total network bandwidth utilization. For this criterion, we develop an optimal filter placement algorithm, as well as a heuristic that executes faster than the optimal algorithm. We evaluate the algorithms by means of simulation experiments. Our results indicate that filters can be effective in substantially reducing bandwidth. We also find filter mobility is worthwhile if there is marked large-scale user mobility. We conclude with suggestions for further work.     

数字式速度比例同步电脑控制系统

数字式速度比例同步控制系统，是把先进的交流变频调速技术，微电子技术和节能效果显著的永磁同步电机融为一体组成的性能优良的调速控制系统。该系统具有调速精度高调整范围大、稳定性好、抗干扰能力强、调整方便、节电效果显著等一系列优点。本文详细介绍了该系统的工作原理，并通过应用实例和分析对比，阐述该系统的优越性。     

Surface designing of polypropylene by critical monitoring of the grafting conditions

The grafting of acrylic acid onto electron beam‐irradiated polypropylene was carried out using preirradiation method. The stability of peroxy radicals was investigated by electron spin resonance. It was found that the decay of peroxy radicals is much faster at 70°C than at 40°C and ambient temperature. The grafting has been observed to be strongly dependent on the monomer dilution in the reaction medium. The grafting was ascertained by attenuated total reflectance (ATR). The distribution of grafts across the samples was monitored by infrared microscopy. It was found that the graft management is considerably influenced by composition of the grafting medium. The grafting involving pure monomer leads to the surface enrichment with the polyacrylic acid chains. The samples grafted in pure monomer led to much lower contact angles as compared to the diluted monomer solution. The swelling of the grafted samples also showed a trend that was governed by the graft management. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 546–553, 2006     

Spectral estimation of video signals

Spectrum analyzers are ubiquitous in laboratory work concerning one dimensional signals. This is because linear operators are best examined in the frequency domain. Linear operators, such as linear filters, DCT coders, line shufflers, etc., dominate also the video systems scenario. Their frequency domain study is as appropriate and informative as it is in the case of their one-dimensional counterparts. This paper considers the problems associated with the introduction of two well-known spectral estimation techniques, the periodogram and AR estimates, to the context of television signals. The potential for application of spectral estimation to video problems is exemplified by a number of applications related to the fields of enhanced quality television and HDTV. Special attention is paid to the computational aspects, whose effective solution conditions the practical applicability of the proposed spectral estimation techniques.R. Rinaldo is currently at the Department of Electrical and Computer Engineering of the University of California, Berkeley.     

Study of Lateral Spread of Ions Emitted from 2.3 kJ Plasma Focus with Hydrogen and Nitrogen Gases

The characteristics of ion beams of hydrogen and nitrogen with different filling pressures emitted from the plasma focus device of 2.3 kJ energy are investigated. CR-39 SSNTDs are employed for the registration of tracks of ions. The exposed detectors are etched in 6N NaOH solution at 70°C and then examined with an optical microscope. The ion flux is estimated to be of the order of 10^5–6 tracks/cm². The flux with the radial position does not exhibit any regular pattern of variation.     

Statistically correlated multi-task learning for autonomous driving

Neural Computing and Applications - Autonomous driving research is an emerging area in the machine learning domain. Most existing methods perform single-task learning, while multi-task learning...     

调速控制的轴流式通风机最小能耗运行条件的研究

针对轴流式通风机调速节能的问题 ,从通风机全压方程入手 ,利用最优控制原理 ,推导出了调速控制的轴流式通风机最小能耗运行条件 ,为此类通风机调速节能运行提供了理论依据     

Development of antimicrobial polypropylene sutures by graft copolymerization. II. Evaluation of physical properties,drug release,and antimicrobial activity

Polypropylene (PP) sutures are prepared by the simultaneous radiation grafting of 1‐vinylimidazole (VIm) onto PP monofilament sutures. The tenacity slightly decreases whereas the elongation increases with the increase in the degree of grafting. Thermogravimetric analysis shows that the stability of the sutures is enhanced by the grafting process. The grafted sutures have reasonably good water uptake. They are subsequently immobilized with an antimicrobial drug, ciprofloxacin. The modified suture releases the drug over a period of 4–5 days. The antimicrobial activity of the modified suture is determined against Esherichia coli by the zone of inhibition technique. A clear zone of inhibition is observed around the drug‐containing suture. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3534–3538, 2007