Hemi- and Homozygous Loss-of-Function Mutations in DSG2 (Desmoglein-2) Cause Recessive Arrhythmogenic Cardiomyopathy with an Early Onset

About 50% of patients with arrhythmogenic cardiomyopathy (ACM) carry a pathogenic or likely pathogenic mutation in the desmosomal genes. However, there is a significant number of patients without positive familial anamnesis. Therefore, the molecular reasons for ACM in these patients are frequently unknown and a genetic contribution might be underestimated. Here, we used a next-generation sequencing (NGS) approach and in addition single nucleotide polymor-phism (SNP) arrays for the genetic analysis of two independent index patients without familial medical history. Of note, this genetic strategy revealed a homozygous splice site mutation (DSG2–c.378+1G>T) in the first patient and a nonsense mutation (DSG2–p.L772X) in combination with a large deletion in DSG2 in the second one. In conclusion, a recessive inheritance pattern is likely for both cases, which might contribute to the hidden medical history in both families. This is the first report about these novel loss-of-function mutations in DSG2 that have not been previously identi-fied. Therefore, we suggest performing deep genetic analyses using NGS in combination with SNP arrays also for ACM index patients without obvious familial medical history. In the future, this finding might has relevance for the genetic counseling of similar cases.     

Prediction of rubber stability by accelerated aging test modeling

This study was devoted to the prediction of polymer material aging. The prediction of the shelf time of tire rubber is used as an example in this article. The main steps of the whole procedure are described. They are the design of the experiment, accelerated aging testing, the construction of a multiresponse mathematical model and parameter estimation, and the extrapolation of the model in real‐life settings. The main pitfalls were deduced, and techniques to overcome these pitfalls are described. Novel methods of data modeling, such as evolutionary design of experiment and successive Bayesian estimation, were used. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1275–1284, 2005     

Formic Acid Production Via Methane Peroxide Oxidation Over Oxalic Acid Activated Fe-MFI Catalysts

Topics in Catalysis - The process of synthesis of formic acid via partial peroxide oxidation of methane over Fe-MFI zeolites, as well as the influence of the catalyst activation by oxalic acid on...     

Using ELP Repeats as a Scaffold for De Novo Construction of Gadolinium-Binding Domains within Multifunctional Recombinant Proteins for Targeted Delivery of Gadolinium to Tumour Cells

Three artificial proteins that bind the gadolinium ion (Gd³⁺) with tumour-specific ligands were de novo engineered and tested as candidate drugs for binary radiotherapy (BRT) and contrast agents for magnetic resonance imaging (MRI). Gd³⁺-binding modules were derived from calmodulin. They were joined with elastin-like polypeptide (ELP) repeats from human elastin to form the four-centre Gd³⁺-binding domain (4MBS-domain) that further was combined with F3 peptide (a ligand of nucleolin, a tumour marker) to form the F3-W4 block. The F3-W4 block was taken alone (E2-13W4 protein), as two repeats (E1-W8) and as three repeats (E1-W12). Each protein was supplemented with three copies of the RGD motif (a ligand of integrin αvβ3) and green fluorescent protein (GFP). In contrast to Magnevist (a Gd-containing contrast agent), the proteins exhibited three to four times higher accumulation in U87MG glioma and A375 melanoma cell lines than in normal fibroblasts. The proteins remained for >24 h in tumours induced by Ca755 adenocarcinoma in C57BL/6 mice. They exhibited stability towards blood proteases and only accumulated in the liver and kidney. The technological advantages of using the engineered proteins as a basis for developing efficient and non-toxic agents for early diagnosis of tumours by MRI as well as part of BRT were demonstrated.     

The effect of mechanical recycling on the microstructure and properties of PA66 composites reinforced with carbon fibers

This article aims to prepare by injection molding recycled polymeric composites based on PA66 reinforced with short carbon fibers after artificial aging for applications in the automotive field. The aging cycles involves the combined action of UV radiation, moisture, and temperature in order to simulate the common outdoor conditions. The 100% recycled composites are obtained by the regranulation of the aged specimens followed by the remelting and re‐injection molding. The study is focused on the comparison between the mechanical behavior and the microstructure of the composites before and after mechanical recycling. The results of mechanical, thermal, and morphological investigations reveal that the recycling process had no significant effect on the final properties and microstructure of the recycled composites. Therefore the recycled PA66CF30 composites could be successfully used for structural or semi‐structural automotive applications guaranteeing good final performances and advantages from the environmental point of view. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42275.     

Environmentally Benign Oxidation of Alkylphenols to p-Benzoquinones: A Comparative Study of Various Ti-Containing Catalysts

Catalytic properties of Ti-containing porous solids were compared in the oxidation of 2,3,6-trimethylphenol (TMP) with H₂O₂ to produce 2,3,5-trimethyl-1,4-benzoquinone (TMBQ, vitamin E key intermediate). Mesoporous titanium–silicates with di(oligo)nuclear Ti centers, metal–organic framework MIL-125 and amorphous TiO₂ demonstrated 100 % selectivity toward TMBQ. Titanium–silicates prepared by evaporation-induced self-assembly revealed superior performance in terms of product yield and catalyst reusability.

     

CO adsorption in PdxCoyXz (X = Au,Mo, Ni) tertiary alloy nanocatalysts for PEM fuel cells—a theoretical analysis

Application of tertiary alloy nanoparticles is becoming more important, however, the local structure of such alloyed particles, which is critical for tailoring their properties, is not yet very clearly understood. In this study, we present detailed theoretical analysis on the atomistic structure and CO adsorption in Pd₇₀Co₂₀X₁₀ (X=Au, Mo, Ni) tertiary composite alloys for their application in fuel cells toward oxygen reduction reaction (ORR). Basic structure and the most stable configurations for all the three composites are determined. Quantum mechanical approaches and classic molecular dynamics methods are applied to model the structure and to determine the lowest energy configurations. Our theoretical results agree well with the experimental results of XRD patterns. Considering those structures as the base, simulations were performed to determine the magnitude of CO poisoning. The results obtained by ab‐initio calculations allow us to estimate the CO‐tolerance that these catalysts might have, along with those obtained for Pd‐Co‐Ni (70:20:10 atom %) tertiary alloy, and compared with commercial Pt (1 1 0) catalyst. From these results, a comparison has been made to show different CO adsorption strengths. This is the first step to fabricate an efficient engineering design that allows us to obtain high‐performance, low‐cost nanostructured catalysts. Copyright © 2010 John Wiley & Sons, Ltd.     

Identification and chemical characterization of specific organic indicators in the effluents from chemical production sites

The structural diversity of the wastewater composition was described by the use of detailed non-target screening analyses of industrial effluents from chemical production sites. Determination of the indicative organic compounds acting as potential molecular indicators for industrial emissions from chemical production industries has been possible due to (i) detailed characterisation of industrial contaminants and identification of compounds with high source specificity, (ii) quantitative determination of the organic constituents in the industrial effluents and (iii) the review of their industrial applications. The determination of potential site-specific markers and industrial molecular indicators corresponding to certain production processes (production of starting materials for manufacturing paper and printing inks, powder coatings as well as epichlorohydrin production) was performed in this work.The results of this study allowed significant contributions to the chemical characterisation of industrial contaminants and isolation of indicators that can act as representatives of industrial effluents in the aquatic environment.