Robust control of composite beams

The structure uncertainty effect is considered on actively controllable composite beam that is a part of the structure of a civil building in a seismodangerous zone. The solution of the problem for active control of vibrations of the composite beam is based on the introduction of a simplified model of sensors and an actuator, which are implemented in the form of piezoelectric plates pasted on two opposite planes of the beam. A suggestion is made of the practical approach that affords the robust control of the composite beam and is founded on the modern H ₂- and H _∞-methods of the theory of control. The effectiveness of the suggested approach for the suppression of vibrations of the composite beam under consideration is illustrated by the examples of numerical modeling.     

An inverse problem for estimation of bending stiffness in Kirchhoff–Love plates

This work deals with the development of a numerical method for solving an inverse problem for bending stiffness estimation in a Kirchhoff–Love plate from overdetermined data. The coefficient is identified using a technique called the Method of Variational Imbedding, where the original inverse problem is replaced by a minimization problem. The Euler–Lagrange equations for minimization comprise higher-order equations for the solution of the displacement and an equation for the bending stiffness. The correctness of the embedded problem is discussed. A difference scheme and a numerical algorithm for solving the parameter identification problem are developed. Numerical results for the obtained values of the bending stiffness as an inverse problem are presented.     

Comparison of the antioxidative properties of caffeic and chlorogenic acids

The antioxidative properties of caffeic and chlorogenic acids during autoxidation of triacylglycerols of sunflower oil at 100 °C were compared. The effects of the two acids within the concentration range 2.8–56.5 × 10⁻⁴ M (50–2000 ppm) were investigated. The stabilization factor (F) as a measure of the effectiveness of the antioxidants and the oxidation rate ratio (ORR) as a measure of their strength were determined. It was found that at concentration 2.8 × 10⁻⁴ M, the effectiveness and the strength of the two acids were practically the same, while at higher concentrations caffeic acid appeared as a much more effective and stronger inhibitor. The analysis of the kinetic data obtained showed that chlorogenic acid and its radicals participated more readily in side reactions with the hydroperoxides and the lipid substrate than caffeic acid and its radicals did.     

Anti-oxidant activity and mechanism of action of trans-resveratrol in different lipid systems

The anti-oxidative properties of trans -resveratrol were studied in the concentration range 0.02–0.20% (8.8 × 10⁻⁴–8.8 × 10⁻³  M ) during autoxidation of pure triacylglycerols of lard (TGL) and of pure triacylglycerols of sunflower oil (TGSO), as well as of commercial sunflower oil at 100 °C. In sunflower oil trans -resveratrol showed no anti-oxidative activity. In pure lipid systems trans -resveratrol considerably retarded the oxidation process, the effect being stronger in the less oxidizable substrate (TGL). The effectiveness (stabilization factor F ), strength (oxidation rate ratio, ORR) and activity ( A = F /ORR) of the different anti-oxidant concentrations were determined. The activity A was found to increase dose dependency as follows: A =3750–15425 for TGL, A =79–207 for TGSO. The participation of trans -resveratrol in the side reactions of inhibited oxidation was discussed.     

The forest biorefinery and its implementation in the pulp and paper industry: Energy overview

Incorporating a biorefinery unit to an operating Kraft pulping process has significant technological, economic and social advantages over the construction of a grassroot biorefinery. Also, the conversion of a Kraft mill from total pulp making to complete biorefinery can be done in a stepwise fashion and so give a company that envisages such transformation the opportunity to master the new technologies, evaluate options and develop an appropriate business plan. In all cases however, the road to conversion presents serious challenges. As components of the wood such as lignin or hemicelluloses are withdrawn from the Kraft pulp line, the heat production capacity from the recovery boiler where they are currently burnt is diminished. At the same time the operation of the added biorefinery unit increases the steam demand. In order to avoid fossil fuel dependency, the total site must be highly integrated and optimized. The application of an intensive and innovative energy optimization methodology to actual case studies has shown that the green, low GHG emissions biorefinery is feasible. The economics can be attractive for a site combining specialty wood pulp and bio-product, biomass gasification, power cogeneration and heat upgrading by optimally positioned and designed absorption heat cycles. The methodology has been applied to biorefining technologies for lignin and hemicelluloses extraction and valorisation, both technologies being coupled with gasification of wood residue.     

Natural antioxidants from herbs and spices

There is a growing interest in natural antioxidants found in plants because of the world‐wide trend toward the use of natural additives in food and cosmetics. Herbs and spices are one of the most important targets to search for natural antioxidants from the point of view of safety. This review presents the results on stabilization of lipids and lipid‐containing foods with different herbs and spices (ground materials or extracts) and reports the structure of the main antioxidatively acting compounds isolated from them. The review presents information about the antioxidative effects of rosemary, sage, oregano, thyme, ginger, summer savory, black pepper, red pepper, clove, marjoram, basil, peppermint, spearmint, common balm, fennel, parsley, cinnamon, cumin, nutmeg, garlic, coriander, etc. Among the herbs of the Labiatae family, rosemary has been more extensively studied and its extracts are the first marketed natural antioxidants. Sage and oregano, which belong to the same family, have gained the interest of many research groups as potential antioxidants.     

Microstructural changes in m. rectus abdominis bovine muscle after heating

A histological and ultrastructural study was conducted to characterize changes in beef muscle structure after heating. Pieces of rectus abdominis muscle were heated at 100 °C over varying time frames from 15 min to 60 min and at 270 °C for 1 min; samples were then prepared for optical and transmission electron microscopy. After 15 min of heating, at 100 °C, a lateral shrinkage in fibre of 48% and an increase in gaps between the myofibrillar masses of 27% was noted. No more significant evolution was observed as heating duration escalated. The ultrastructure showed strong myofibril to sarcolemma detachments in which granular aggregates, coming in part from myofibrillar proteins, are stored. Neighbouring muscle fibres showed strong heterogeneity in morphological behaviour after thermal treatment, suggesting that differences in composition and structure of the cytoskeleton proteins in the different fibres can cause denaturation/shrinkage of the proteins at different times along the timescale of microstructural changes during heating. Short heating at high temperatures expanded the gaps between myofibrillar mass, but the overall changes in the ultrastructure were similar to those obtained when heating at 100 °C.     

How to improve intrinsic and extrinsic reliability of vias by process optimization

A systematic study of various processes and their impact on intrinsic reliability has been performed on Cu dual damascene interconnects. The most significant improvement for intrinsic reliability is the ‘break-through’ liner. A strong impact on stressmigration (SM) was revealed using a HDP based SiN deposition on top of Cu lines. Early failures in electromigration (EM) studies are present with insufficient cleaning processes. No reliability impact was detected with different plating and slurry chemistries and liner thickness increase. Extrinsic via reliability is assessed with a special test chip comprising 3E9 via/wafer. High ohmic vias are identified before and after thermal stress. As an example, the failure rates in Cu dual damascene levels with relaxed pitch before and after cleaning optimization are discussed.     

Adoption of Protective Behaviours: Residents Response to City Smog in Hefei,China

City smog outbreaks in many Chinese cities aroused public concern about health risks and environmental pollution in China. This study investigates protective behaviours of the citizens in response to city smog using protective action decision to understand their actions. A survey was conducted in Hefei, Anhui in 2015, after the city experienced severe smog events. The data from 429 respondents supported the developed model. Hazard‐related attributes were the strongest predictors for willingness to adopt protective behaviours. Public risk perception only positively affected self‐protective actions. Information sources affected risk perception and increased the respondents’ self‐protective intentions. Older adults and respondents with lower educational levels were more likely to adopt environmentally friendly actions. The findings’ theoretical and practical implications are also discussed.