Synthesis of heterocyclic metal complexes and their evaluation as marine antifoulants

4-Amino-3-thio-1,24-triazolidine (L₁) and 4-amino-5-thio-1,3,4-thiadiazole (L_II) as well as their metal complexes of the general formulae ML_I·2H₂O and ML_IICl (M; Pb(II), Cd(II) and Zn(II)) were prepared. With Sn(II), we obtained Sn(L_I)₂·2H₂O and SnL_IICl, respectively. The structures of the compounds were identified through elemental analysis, and IR and UV spectra measurements, in addition to thermal analysis in case of the metal complexes. The antifouling properties of the compounds were tested by their incorporation into paint formulations which were applied to PVC substrates and tested in water from Alexandria western harbour. When the compounds were added at 17·5% by volume, the coated panels were fouled after 3 months of immersion. The addition of 6·7% by volume of tributyltin oxide to 15·8% of the prepared compounds in one formulation elevated the paint efficiency and prevented fouling for 11 months. Paint containing solely tributyltin oxide at the same concentration was inactive against algae.     

Optimized species growth in epoxy polymerization with real-coded NSGA-II

Satisfaction of twin objectives of maximization of M_n along with minimization of PDI do not necessarily guarantee the maximization of concentration of desired species in a semibatch epoxy polymerization process. As the final product consists of a number of polymer species, a need is felt to perform an advanced optimization study to come up with such process conditions for which the selective growth of a particular polymer species is maximized in minimum possible processing time and the population of other species should be at their lowest values. These above-mentioned conflicting objectives frame the platform for a multi-objective optimization problem, which is solved here using a real-coded non-dominated sorting genetic algorithm or NSGA II and Pareto optimal solutions are obtained. The decision variables are discrete addition rates of various ingredients, e.g. the amount of addition of bisphenol-A (a monomer), sodium hydroxide and epichlorohydrin at different time steps. All species balance equations, bounds on M_n, PDI and addition amounts are treated as constraints. Results are very promising in terms of optimized operations for selective enhancement of desired polymer species for the epoxy polymerization process. Total additions are kept very close to available experimental conditions to minimize probable extrapolation errors. It has been observed that preferential oligomer production is extremely difficult for epoxy polymerization. Lower chain polymers are the only choice for a good quality, stable polymer product.     

Optimal production-inventory policy for make-to-order versus make-to-stock based on the M/Er/1 queuing model

This paper analyzes a multi-product production / inventory system where demands for each item arrive according to a Poisson process and the production time for each product has an Erlang distribution. The paper proposes an optimality condition that specifies whether each product should be produced make-to-stock or make-to-order. In the event a product should be produced make-to-stock, an approach for computing the optimal base-stock level is proposed. Numerical examples are given for illustrative purpose.     

Evaluation of a proper controller performance for maximum-power point tracking of a stand-alone PV system

In this paper the implementation of a suggested stand-alone PV system, for maximum-power point tracking (MPPT), is carried out. Also, this paper presents a comparative study, through experimental work, between the conventional PI controller and the fuzzy logic controller (FLC) under different atmospheric conditions. The implemented system with both the PI controller and the FLC gives a good maximum-power operation of the PV array, but the tracking capability for different optimum operating points is better and faster for the case of using the FLC compared to the case of using the PI controller.     

Sediment Concentration and Its Prediction by Perceptron Kalman Filtering Procedure

Predictions of the discharge and the associated sediment concentration are very useful ingredients in any water resources reservoir design, planning, maintenance, and operation. Although there are many empirical relationships between the discharge and sediment concentration amounts, they need estimation of model parameters. Generally, parameter estimations are achieved through the regression method (RM), which has several restrictive assumptions. Such models are locally valid and their structures and parameter values are questionable from region to others. This paper proposes a new approach for sediment concentration prediction provided that there are measurements of discharge and sediment concentration. The basis of the methodology is a dynamic transitional model between successive time instances based on two variables, namely, discharge and sediment concentration measurements. The transition matrix elements are estimated from the measurements through a special form of the artificial neural networks as perceptrons. The sediment concentration predictions from discharge measurements are achieved through a perceptron Kalman filtering (PKF) technique. In the meantime, this technique also provides temporal predictions. A certain portion of the measurement sequence is employed for the model parameter estimations through training and the remaining part is used for the model verification. Detailed comparisons between RM and PKF approaches are presented and, finally, it is shown that the latter model works dynamically by simulating the observation scatter diagram in the best possible manner with smaller prediction errors. The application of the methodology is performed for the discharge and sediment concentration measurements obtained from the Mississippi River basin at St. Louis, Missouri. It is found that the PKF methodology has smaller average relative, root-mean-square, and absolute errors than RM. Furthermore, graphical representation, such as the scatter and frequency diagrams, indicated that the PKF approach has superiority over the RM.     

Aggregation of Induction Motor Loads for Transient Stability Studies

This study investigates the dynamic representation of a group of induction motors by one or more equivalent motors. The unknown parameters of the equivalent are estimated through a weighted-least-squares procedure. Verification of simulated results with experimental ones suggests that a fifth order dynamic model of the aggregate with a ninth order parameter model is appropriate. The least squares technique was found to provide good convergence characteristics subject to satisfaction of the following conditions good initial estimate of the parameters, proper selection of acceleration factors and homogenity of the motor group.     

Electroplating of nickel-cadmium alloys from alkaline solutions

The electroplating of Ni-Cd alloy coatings was carried out from alkaline baths (pH 10). For comparison, electroplating of the parent metals, Ni and Cd, was performed individually under the same conditions. The cathodic current efficiency for codeposition was high and decreased with increasing current density. The codeposition process is an anomalous type of plating with Cd being the preferentially deposited metal. The Ni content in the deposits increased with increasing current density. This increase in Ni content improves the corrosion resistance and microhardness of the deposits. X-ray diffraction analysis showed that the deposits consist of a mixture of Ni, β, γ, γ¹ phases.     

Analysis of real-time properties and rules for setting protocol parameters of MAP networks

This paper reports on an evaluation of real-time properties of MAP (Manufacturing Automation Protocol) networks by analytical considerations and measurements. Based on a model of the time schedule of a communication cycle figures for response times (transport system) and message delays (MAC layer) are given. The influence of some options for handling acknowledgments within the transport layer is shown. The message delay at MAC layer is separated into an implementation-dependent and a protocol-dependent protion, and an upper bound is derived. Rules for selecting protocol parameters affecting real time behavior are given. Aspects for improved implementations of communication controllers for MAP networks are discussed.     

Electrical properties of tri-n-butyl tin acrylate-methylmethacrylate copolymers

The copolymerization of tri-n-butyl tin acrylate (TBTA) with methylmethacrylate (MMA) has been investigated in dioxane. The composition of these copolymers was determined quantitatively by ¹H nuclear magnetic resonance (NMR) spectroscopy. The tin contents were estimated by gravimetric as well as thermogravimetric techniques (TGA). The reactivity ratio of such copolymers was estimated by application of the Kelen-Tudos method. The dielectric properties of the copolymers have been studied over a frequency range of 100–50 kHz at different temperatures from 20 to 70°C. The electrical conductivity for such copolymers was also measured. The results are interpreted in terms of the tin content of the copolymers.