Characterization of the Ion Beam Current Density of the RF Ion Source with Flat and Convex Extraction Systems

Silicon - The characterization of ion beam current density distribution and beam uniformity is crucial for improving broad-beam ion source technologies. The design of the broad ion beam extraction...     

Influence of Ni Interlayers on the Mechanical Properties of Ti6Al4V/(WC-Co) Friction Welds

Ni interlayers were introduced prior to dissimilar friction welding of Ti6Al4V base material to three cemented carbide substrates. The fracture strength of Ti6Al4V/(WC-6 wt% Co) welds were poor and were markedly improved when 20-µm thick Ni interlayers were introduced prior to dissimilar friction welding. These results were only produced when the (WC-6 wt% Co) cermet was electroplated prior to friction welding. When the Ti6Al4V alloy was electroplated prior to friction welding, fractured WC particles and cracking were observed in the (WC-Co) carbide substrate. The fracture strengths of Ti6Al4V/(WC-11 wt% Co) and Ti6Al4V/(WC-24 wt% Co) welds were not improved when 20-µm thick Ni interlayers were introduced prior to friction welding. During mechanical testing, the Ni layer retained at the dissimilar joint interface created a region of weakness.     

Statistical analysis of fiber-optic CDMA communication systems. I. Device modeling

In this paper, we present a new methodology for analysis of all-optical fiber-optic code-division multiple-access (FO-CDMA) networks. In this analysis, we propose statistical models, based on photon-counting techniques, for some basic elements of the network, such as splitters, combiners, star couplers, and FO-CDMA passive encoders/decoders. By following the statistical variation of the photon-count of the string of pulses that constitutes the address sequence in an FO-CDMA network, we will be able to reveal the quantum-limited optical signal-to-noise ratio (OSNR) required at the transmitter output to meet the performance limits. Moreover, considering receiver thermal noise and source extinction ratio, we explore the role of using an optical preamplifier before the detector and the dependence of the performance on the transmitted power and the weight of the employed optical orthogonal codes (OOCs).     

Electro-optical characteristics of indium tin oxide (ITO) films: effect of thermal annealing

The effect of thermal annealing on the electrical and optical characteristics of ITO films prepared by reactive sputtering and thermal evaporation have been studied. The effect of the thermal annealing is to improve the conductivity and the optical transmission in the shorter wavelength region. The conductivity of the films increases with annealing temperature, this behaviour is associated with grain growth in the film.     

Low‐velocity impact of nanocomposite and polymer plates

Nanocomposites are more widely studied today because of higher stiffness, decreased permeability, thermal stability, and many other properties superior to those of regular polymers. However, manufacturers are concerned about implementing nanocomposites because of their lower impact properties with respect to the base polymer. This study focused on low‐velocity impact tests of a thermoplastic olefin by itself and with 5 wt % nanoclay. The impact tests were conducted at ?40, 23.9, and 65.6°C until the polymer and nanocomposite plates experienced complete striker penetration. The force–time and force–deflection responses obtained from the impact testing provided a means of comparing the impact performances of the two materials. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2309–2315, 2005     

Applying gravitational search algorithm in the QoS-based Web service selection problem

With the growing use of service-oriented architecture for designing next generation software systems,the service composition problem and its execution complexity have become even more important in resp...     

A self-routing load balancing algorithm in parallel computing: comparison to the central algorithm

Load balancing is an important stage of a system using parallel computing where the aim is the balance of workload among all processors of the system. In this paper, we introduce a new load balancing algorithm with new capabilities for parallel systems, among which is the independence of a separate route-finder algorithm between the load receiver and sender nodes. In addition to simulation of the new algorithm, due to similarity in behavior to the proposed algorithm, the central algorithm is simulated. Simulation results show that, the system performance increases with the increase of the degree of neighborhood between the processors. These results also indicate the algorithm’s high compatibility with environment changes.     

Waveguide filter with improved stopband response using transversal slots

In this article, the design and realization of waveguide filter with improved stop‐band response is presented. By inserting transversal slots at the proper position of cavities, without disturbing the field distribution of the dominant mode, the second longitudinal resonant modes are radiated out. This caused the out‐of‐band frequency response of the filter to be improved. The validity of the proposed technique is confirmed by comparison between measurement values and simulation results from the finite element method through the commercial software (high frequency structure simulator). Also, to assure electromagnetic compatibility the slot surfaces are covered by absorbing material. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2011.