Microwave hybrid fast sintering of red clay ceramics

This work aimed to examine the performance of the hybrid sintering of clay ceramic in a microwave furnace, compared to the sintering process in a conventional furnace. The raw materials were subjected to X-ray fluorescence, loss on ignition (LOI), X-ray diffraction, particle size distribution, real specific mass, and thermogravimetric analyses. The red clay ceramic mass was prepared, extruded, pre-sintered in a conventional furnace at 600°C/60 min, and sintered at temperatures between 700 °C and 1100 °C. The sintering conventional (resistive oven) was carried out for 60 min with a heating rate of 10°C/min. In the microwave furnace, the sintering times were 5, 10, and 15 min, with a heating rate of 50°C/min, with a sintering chamber coated with silicon carbide (susceptor). The sintered specimens were characterized according to linear shrinkage, water absorption, apparent porosity, apparent specific mass, X-ray diffraction, Raman spectroscopy analysis, spectroscopy analysis in the ultraviolet and visible regions, microhardness, and scanning electron microscopy. The results showed that microwave sintering promoted an increase in the microhardness and apparent specific mass, and reduction in water absorption and apparent porosity values, due to greater densification in the microstructure. The best results occurred for specimens sintered at 1100°C.     

Value of information in remanufacturing complex products

Remanufacturing facilities usually face a trade-off between limited information about remanufacturing yields and potentially long supplier lead times. To improve production performance, these firms may attempt to acquire more timely and accurate information about remanufacturing yields or alternatively, to reduce the lead times of purchased parts. We develop four decision-making models to evaluate the impact of yield information and supplier lead time on manufacturing costs. We identify the operating conditions under which these capabilities are valuable, along with their relative impact on facility performance. Each model is formulated as an infinite horizon, stochastic dynamic program (Markov decision process). Our results indicate that the yield information is generally quite valuable, while investments in supplier responsiveness provide trivial returns to products with few parts. However, as product complexity increases with large number of target parts, the value of short lead times increases.     

A small-angle X-ray scattering study of powder compaction

This work demonstrated a novel and potentially important application of two-dimensional small-angle X-ray scattering (2D-SAXS) to investigate powder compaction. SAXS from powder compacts of three materials commonly used for pharmaceutical tabletting exhibited azimuthal variations, with stronger intensity in the direction of the applied compaction force, relative to the transverse direction. This implied that compaction of a (macroscopic) powder could also produce changes on the molecular (nanometre) scale, which can be probed by 2D-SAXS. Two possible explanations for this effect were suggested. A combination of anisometric (i.e. elongated or flattened) granules with anisotropic morphologies could result in azimuthal variation in X-ray scattering due to granule orientation. It is expected that this mechanism would require relatively low packing density, so may operate during die filling. Granule re-orientation appeared less likely at higher packing densities and compaction pressures, however. Under these conditions, the changes in the 2D-SAXS patterns would be consistent with the powder granules becoming relatively flattened in the compression direction, with corresponding changes in their nano-scale morphology. The magnitude of this effect was found to vary between the materials used and increased with compaction pressure. This suggested that 2D-SAXS studies could provide useful information on force-transmission within a compressed powder. Further analysis of the data also suggested differences in the compaction mechanisms (i.e. granule re-orientation, deformation or fragmentation) between the materials studied.     

Outcomes related to burn-related child abuse: a case series

Nationally, approximately 10% of child abuse cases involve burning, and up to 20% of pediatric burn admissions involve abuse or neglect. Historically, these cases have been more difficult to prosecute than nonburn cases for multiple reasons. Between 1995 and 1999, there were 285 pediatric (under 18) patients admitted to the Spectrum Health Regional Burn Center. Of these cases, 18 of the alleged perpetrators were legally investigated for suspicion of child abuse, and 7 received punitive sentences. We found that men tended to be prosecuted and convicted more often than women and that cases involving multiple instances of injury tended to be prosecuted more frequently. Similarly, we found that cases involving more severe injuries tended to be prosecuted more successfully. There are many psychological and social factors involved in handling burn abuse cases. However, by successful prosecution of these crimes, victims tend to fare better both socially and psychologically.     

Synthesis and Properties of Photoisomerizable Derivatives of Isosorbide and Their Use in Cholesteric Filters

This paper describes the synthesis of photoisomerizable derivatives of isosorbide. These derivatives contain a stilbene or cinnamate moiety and can therefore be used as photoisomerizable chiral compounds in cholesteric liquid‐crystalline mixtures. The reflection wavelength of cholesteric layers made from these mixtures is increased by UV irradiation due to the fact that the Z‐isomers of these derivatives exhibit a lower helical twisting power than the corresponding E‐isomers. The cinnamate derivatives are very suitable for use in cholesteric color filters that find application in liquid‐crystal displays.     

Stability of formal thought disorder and referential communication disturbances in schizophrenia.

This study examined the degree to which different types of communication disturbances in the speech of 48 schizophrenia patients and 28 controls were variable and state related versus stable and traitlike. Clinically rated formal thought disorder and 5 types of referential disturbance showed substantial stability within participants over time. The sixth type of referential disturbance, the vague reference, was not stable over time. Formal thought disorder was associated with the severity of core psychotic symptoms in patients, whereas referential disturbances showed little or no association with positive or negative symptom severity. Furthermore, changes in psychotic symptoms over time were accompanied by corresponding changes in formal thought disorder but not referential disturbances. These results support the idea that some types of referential disturbances are traitlike and may be reflective of vulnerability as well as manifest illness. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The relationship between attachment, psychopathology, and childhood disability.

Analyzes the literature on 3 aspects of attachment—neurobiological influences, interpersonal and intrapersonal factors, and societal factors—in the psychological development of chronically disabled children. Evidence suggests that neurochemical substances such as cortisol and brain biogenic amine systems reciprocally interact with psychological and psychosocial factors to influence attachment. Interpersonal and intrapersonal factors such as temperamental characteristics of children, severity and type of disability, and family influences interact in the process of attachment. Social perceptions and prejudices about the disabled individual increase parental stress, and diminish parental involvement and resources, which are necessary for attachment. These 3 processes are powerful and interrelated forces in child development, with potential to modify social competence, neurological development, and psychosocial adjustment. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Being the best: Preliminary results from a national study of the achievement of prominent Black and White women.

Examined the achieving styles, coping strategies, gender roles, and feminist attitudes of 125 prominent, highly achieving Black and White women (mean age 53.5 yrs) in the US. Multivariate analyses of variance were used to examine race differences and similarities; canonical regression analyses (MANOVAs) were used to examine relationships among achieving styles and the other sets of variables. Both similarities and differences between Black and White women were found, and achieving styles were significantly related to the other variables. Strengths, limitations, and implications of the study for counseling are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)