A Voltage Control Method for a Distributed Line Feeder by means of Multiagent Approach

This paper proposes a method for the coordinated control of power factor by means of a multiagent approach. The proposed multiagent system consists of two types of agent: single feeder agent (F_AG) and bus agent (B_AG). In the proposed system, an F_AG plays as an important role, which decides the power factors of all distributed generators by executing the load flow calculations repeatedly. The voltage control strategies are implemented as the class definition of Java into the system. In order to verify the performance of the proposed method, it has been applied to a typical distribution model system. The simulation results show that the system is able to control very violent fluctuation of the demands and the photovoltaic (PV) generations.     

Subsolidus Phase Equilibria in the System Bi2O3-TiO2-Nb2O5

The subsolidus phase equilibria in the system Bi₂O₃-TiO₂-Nb₂O₅ at 1100°C were determined by solid-state reaction techniques and X-ray powder diffraction methods. The system was found to contain 4 ternary compounds, i.e. Bi₃TiNbO₉, Bi₇Ti₄NbO₂₁, a cubic pyrochlore solid solution having a compositional range of 3Bi₂O₃· x TiO₂ (7– x )Nb₂O₅ where x ranges from 2.3 to 6.75, and an unidentified phase, 4Bi₂O₃·11TiO₂·5Nb₂O₅.     

Electrical Resistivity of Titanium-Containing Glasses

Titanium-containing glasses were prepared by fusion of a base glass (BaO·B₂O₃SiO₂) and TiO₂ and/or Ti₂O₃ in Ar. Their resistivities did not vary with melting time and temperature. Interaction of Ti⁴⁺ and Ti³⁺ in the glasses was deduced by spectroscopy, but the valence states in the batch compositions were preserved in the glasses, according to the chemical analysis. Glasses containing either Ti⁴⁺ or Ti³⁺ had very high resistivities, whereas the glass prepared by melting a mixture of a Ti⁴⁺-containing and a Ti³⁺-containing glass had much lower resistivity. All results confirmed the possibility of controlling the resistivity by batch composition for these glasses.     

Present Status of the Nd:YAG Thomson Scattering System Development for Time Evolution Measurement of Plasma Profile on Heliotron J

A new high repetition rate Nd:YAG Thomson scattering system is developed for the Heliotron J helical device.A main purpose of installing the new system is the temporal evolution measurement of a plasma profile for improved confinement physics such as the edge transport barrier (H-mode) or the internal transport barrier of the helical plasma.The system has 25 spatial points with ～10mm resolution.Two high repetition Nd:YAG lasers (>550mJ@ 50Hz) realize the measurement of the time evolution of the plasma profile with ～10ms time intervals.Scattered light is collected by a large concave mirror (D=800 mm,f/2.25) with a solid angle of ～100 mstr and transferred to interference filter polychromators by optical fiber bundles in a staircase form.The signal is amplified by newly designed fast preamplifiers with DC and AC output,which reduces the low frequency background noise.The signals are digitized with a multi-event QDC,fast gated integrators.The data acquisition is performed by a VME-based system operated by the CINOS.     

Contribution of Tropomyosin to Fish Muscle Gel Characteristics

To determine the contribution of tropomyosin to fish muscle gel characteristics, the gel properties of the tropomyosin-desensitized actomyosin system and of the tropomyosin-myosin system were investigated. For both systems, the indices of gel properties decreased considerably on increasing the tropomyosin content. Even when the two-step heating was carried out, the indices of gel properties decreased considerably on increasing the tropomyosin content. Tropomyosin negatively affected the gel formation of fish muscle and reduced the gel strength and elasticity of the fish muscle gels.     

REVERSE OSMOSIS CONCENTRATION of GREEN TEA JUICE

The reverse osmosis concentration of green tea juice was attempted by using membranes prepared from different polymeric materials. the pore sizes of the membranes were also changed in order to investigate the effect of the pore size on the membrane performance. Special attention was focused on the removal of caffeine from the tea juice while retaining other components such as polyphenols and amino acids. Since severe membrane fouling was observed while tea juice was treated at high concentrations, an attempt was made to describe the membrane fouling by a modified gel model that includes the effect of the interaction between the membrane and the tea juice components.     

SOME METHODS FOR ANALYSIS OF SOLVENT EXTRACTION DATA AND THEIR APPLICATIONS

Abstract

Three programs develpoed to analyze data for liquid-liquid extraction of metal have been applied to the calculation of the stability constants of aqueous cadmium(II)-thiocyanato complexes by using the data for the extraction of tricaprylmethylammonium salt in benzene. The resulting stability constants of the aqueous thiocyanato complexes determined were: for the trial and error method log β₁ = 2·97, log β₂ = 3·70, log β₃ =3·50 and log β₄ =3·28; for the Gauss method log β₁ = 2·91, log β₂ = 3·70, log β₃ =3·35 and log β₄ = 3·29; for the Newton-Gauss method for log β₁ = 2·47, log β₂ =3·24, log β₃ =2·29 and log β₄ = 2·85     

Proteolysis Affects Thermal Gelation of Squid Mantle Muscle

Thermal gelation of squid mantle muscle was studied by means of gel strength measurement and SDS-polyacrylamide gel electrophoresis. The gel strength of thermally induced squid meat gel decreased when squid meat paste was heated in two steps (35°C for 30 min followed by 90°C for 30 min). This decrease in gel strength was effectively depressed by the addition of protease inhibitors such as ethylenediaminetetraacetic acid (EDTA), phenylmethylsulfonyl fluoride (PMSF), and soybean trypsin inhibitor, indicating that me-tallo- and/or serine-proteases were mainly involved in the deterioration of squid meat gel prepared by two-step heating. SDS-PAGE analysis demonstrated that EDTA or PMSF suppressed the degradation of myosin heavy chain.