Theory and design of a tapered line distributed photodetector

We present the theory and design of a tapered line distributed photodetector (TLDP). In the previously demonstrated velocity-matched distributed photodetector (VMDP), high electrical bandwidth is achieved by proper termination in the input end to absorb reverse traveling waves, sacrificing one-half of the quantum efficiency. By utilizing the tapered line structure and phase matching between optical waves and microwaves in our analyzed structure, a traveling-wave photodetector is more realizable and ultrahigh bandwidth can be attained due to removal of the extra input dummy load that sacrifices one-half of the total quantum efficiency. To investigate the advantages of TLDP over VMDP, we calculate their electrical bandwidth performances by using an analytic photodistributed current model. We adopted low-temperature-grown (LTG) GaAs-based metal-semiconductor-metal (MSM) traveling-wave photodetectors as example unit active devices in the analytic bandwidth calculation for their high-speed and high-power performances. Both VMDP and TLDP in our simulation are assumed to be transferred onto glass substrates, which would achieve high microwave velocity/impedance and make radiation loss negligible. The simulated bandwidth of a properly designed LTG GaAs MSM TLDP is /spl sim/325 GHz, which is higher than the simulated bandwidth of the LTG GaAs MSM VMDP with an open-circuit input end (/spl sim/240 GHz) and is almost comparable to the simulated bandwidth of an input-terminated LTG GaAs MSM VMDP (/spl sim/330 GHz). This proposed method can be applied to the design of high-bandwidth distributed photodetectors for radio-frequency photonic systems and optoelectronic generation of high-power microwaves and millimeter waves.     

俄西超共沸酸精馏法制浓硝酸工艺比较

介绍了俄罗斯和西班牙超共沸酸精馏法制取浓硝酸工艺,对2种工艺进行了能耗比较和评述.认为引进该技术工艺包国内配套建设硝酸装置的条件已经具备.     

聚丙烯酸钠类高吸水性树脂的研究

采用反相悬浮聚合法合成高吸水性树脂.将丙烯酸(单体,水相)用氢氧化钠部分中和,然后与环己烷(溶剂,油相)共混,用水溶性的过硫酸钾做引发剂,N,N-亚甲基双丙烯酰胺做交联剂,在一定的反应温度和时间下,得到聚丙烯酸钠高吸水性树脂.     

氩等离子体辐照反相乳液接枝改性涤纶织物的研究

首次提出了在等离子体辐照后再用反相乳液接枝改性涤纶织物的新方法,探讨了接枝颗粒特征以及织物各项物理力学性能.接枝织物的结构及性能的测试结果表明:接枝物的尺寸远小于纤维的直径,在提高织物吸湿性的同时,对织物透气性能和强力等无明显影响;实验也证实了乳液中未接枝单体可以再次聚合.     

Asymmetric Regulation System Fit for Chinese Telecom Market

After the new round of restructuring of Chinese telecom sector,it's pressing to formulate and implement asymmetric regulation policies so as to shape an effectively competitive market structure in a relatively short term.This paper reviewed the asymmetric regulation policies and practices carried out in foreign telecom market,and then according to the specific situations of Chinese telecom market,proposed the principles and corresponding policies for establishing an asymmetric regulation system fit for Chin...     

天然气长输管道泄漏检测方案对比

大口径、长距离天然气输送管道的泄漏检测和定位技术日益受到人们的重视。总结评价了用于天然气长输管道泄漏检测和安全预警的各种技术方案，讨论了其基本原理、适用范围、技术成熟度、优点和缺点以及工程应用情况；采用灵敏度、定位精度等7项技术指标对各种泄漏检测方法进行了评价和对比。目前，音波泄漏检测技术和分布式光纤泄漏检测技术由于具有诸多方面的优点，是近年来国内外泄漏检测技术研究的重点和热点，这两种技术已初步应用于实际，并取得了良好的效果。重点对这两种泄漏检测技术的原理、适用范围、所能达到的技术指标、优、缺点以及工程案例进行了详细讨论、分析和对比，可为我国天然气长输管道泄漏检测和安全预警系统的开发和研究提供技术依据。     

全球粮食危机中化肥产业面临的问题与对策

从国内外整体形势来看,通货膨胀带来的粮食危机正在全球蔓延,化肥供应不稳、价格不断增长已经对粮食生产以及农业甚至国家经济平稳发展形成了严重影响.能源和粮食紧张将是我国长期面临的问题,这就决定了化肥产业的发展方向.在产业内部,必须走向大型化基础产业与小型服务型产业结合的道路,各种产品应该根据商品特性和农业需求进行市场细分.建议国家加强对化肥产业的宏观调控、转变调控方式,加强市场需求的预警预测和实时调节,提高国家对肥料施用技术的支持力度.同时建议企业做好信息分析工作,及时做出有利于国家和企业长远发展的决策,不应盲目跟随涨价而丧失市场,当前应利用化肥涨价的时机开展技术服务工作,抢占化肥市场制高点.     

Investigation of Mechanical and Electrical Characteristics for Cracked Conductive Particle in Anisotropic Conductive Adhesive (ACA) Assembly

In an anisotropic conductive adhesive (ACA) assembly, the electrical conduction is usually achieved with the conductive particles between the bumps of integrated circuit (IC) and corresponding conductive tracks on the glass substrate. Fully understanding of the mechanical and electrical characteristics of ACA particles can help to optimize the assembly process and improve the reliability of ACA interconnection. Most conductive particles used in the ACA assembly are with cracks in the metal coating of the particles after the ACA bonding. This paper introduced the fracture analysis by applying the cohesive elements in the numerical model of the nickel-coated polymer particle and further simulating the cracks initiation and propagation in the nickel coating during the ACA bonding. The simulation results showed that the stress distribution on the nickel-coated particle with cracks was significantly different from that on the nickel-coated particle without crack, indicating that the stress analysis by taking the crack into consideration is very important for the reliability assessment of the ACA interconnection. The stress analysis of cohesive elements indicated that the cracks initiated at the central area of the nickel coating and propagated to the polar area. Furthermore, by the introduction of a new parameter of the virtual resistance, a mathematical model was established to describe the electrical characteristics of the nickel-coated particle with cracks. The particle resistance of the nickel-coated particle with cracks was found to be much higher than that of the particle without crack in the optimized bonding pressure range, indicating that it is necessary to take the crack into consideration for the particle conduction analysis as well. Therefore, the fracture analysis on the conductive particle by taking the crack into consideration could accurately evaluate the reliability of ACA interconnection and avoid serious reliability issues.