Evolution of Superconducting and Normal-State Properties in C60 “Polymer” Doped with K

Abstract:

Bulk superconductivity was observed in a new iodine-treated aggregated form of solid C₆₀, believed to be a “polymer”, by doping with alkali metal. Evolution of superconducting (T_c = 17.2 K) and normal-state properties, has been studied as a function of doping with K. The normal-state dc susceptibility exhibited a complex behavior with the increasing K uptake, evolving from an enhanced paramagnetism at low doping level, to a weakly temperature-dependent diamagnetism at the optimum doping level for superconductivity, and ending with a strong temperature-independent diamagnetism in over-doped samples. The measured superconductivity parameters, such as T_c, London penetration depth and the Ginzburg-Landau coherence length, are compared with those of the monomer K₃C₆₀. and the main factors determining the differences between the two systems are discussed.     

Characteristics of IgA anti-HIV antibodies in plasma from patients with HIV infection

The concentration of total IgA and the specificity and molecular size of IgA anti-human immunodeficiency virus (HIV) type-1 antibodies in plasma obtained from individuals at different stages of HIV infection were analyzed. The concentration of total IgA in the plasma was not decreased even in the late stage of HIV infection, in contrast with those of total IgG and IgM. The IgA anti-HIV antibodies differed to the IgG anti-HIV antibodies in their specificity as determined by Western blotting. The IgA antibodies mainly bind to Env glycoproteins. The IgA anti-HIV antibodies in plasma were detected between IgG and IgM by gel filtration, suggesting the presence of polymeric IgA anti-HIV antibodies. These results indicate that the production of non-specific IgA in plasma is enhanced by unknown mechanisms in every stages of HIV infection, and suggest that IgA anti-HIV antibodies in plasma which are possibly polymeric and have unique specificity may play an important role in HIV infection.     

Approach from physicochemical aspects in membrane filtration

In membrane filtration, solution environment factors such as pH and solvent density are important in controlling the filtration rate and the rejection of the particles and/or the macromolecules. The filtration rate and the rejection in membrane filtration have been investigated from physicochemical aspects. It was shown that the properties of the filter cake formed on the membrane surface play a vital role in determining the filtration rate in mem-brane filtration. It was clearly demonstrated that such filtration behaviors as the filtration rate and the rejection are highly dependent on the electrical nature of the particles and/or the macromolecules. Furthermore, it was shown that the solvent density ρ has a large effect on the steady filtration rate in upward ultrafiltration.     

Pressure effects on the low temperature state of the α-(BEDT-TTF)2MHg(SCN)4 organic conductor family

Systematic magnetotransport measurements as a function of hydrostatic pressure have been made on four members of the α-(BEDT-TTF)₂MHg(SCN)₄ organic conductor family (M = K, Tl, Rb, NH₄). Applied pressure above about 6 Kbar removes the density wave state for M = K, Tl, and Rb. For M = NH₄ the superconducting state is removed with pressure as dT_c/dP = − 0.25 K/Kbar. In all cases the Shubnikov de Haas oscillation frequency increases with pressure, including the β orbit (which involves the entire Brillouin zone), and new orbits involving very small fractions of the Fermi surface are formed.     

Effects of heated seats in vehicles on thermal comfort during the initial warm-up period

Eight subjects participated in a subjective experiment of eight conditions to investigate the effects of heated seats in vehicles on skin temperature, thermal sensation and thermal comfort during the initial warm-up period. The experimental conditions were designed as a combination of air temperature in the test room (5, 10, 15, or 20 °C) and heated seat (on/off). The heated seat was effective for improving thermal comfort during the initial warm-up period when air temperature was lower than 15 °C. Use of heated seats prevented decreases in or increased toe skin temperature. Heated seats also increased foot thermal sensation at 15 and 20 °C. Optimal thermal sensation in contact with the seat was higher when air temperature was lower. Optimal skin temperature in contact with the seat back was higher than that with the seat cushion. Moreover, these optimal skin temperatures were higher when air temperature was lower.     

Direct Reprogramming and Induction of Human Dermal Fibroblasts to Differentiate into iPS-Derived Nucleus Pulposus-like Cells in 3D Culture

Intervertebral disc (IVD) diseases are common spinal disorders that cause neck or back pain in the presence or absence of an underlying neurological disorder. IVD diseases develop on the basis of degeneration, and there are no established treatments for degeneration. IVD diseases may therefore represent a candidate for the application of regenerative medicine, potentially employing normal human dermal fibroblasts (NHDFs) induced to differentiate into nucleus pulposus (NP) cells. Here, we used a three-dimensional culture system to demonstrate that ectopic expression of MYC, KLF4, NOTO, SOX5, SOX6, and SOX9 in NHDFs generated NP-like cells, detected using Safranin-O staining. Quantitative PCR, microarray analysis, and fluorescence-activated cell sorting revealed that the induced NP cells exhibited a fully differentiated phenotype. These findings may significantly contribute to the development of effective strategies for treating IVD diseases.     

Proposal for a benchmark model of a laminated iron core and a large‐scale and highly accurate magnetic analysis

This paper describes a benchmark model proposed for the clarification of the characteristic of various methods for modeling the laminated iron core. In order to obtain a reference solution of the benchmark model, a large‐scale nonlinear magnetostatic field analysis with a mesh fine enough to represent the microscopic structure of the laminated iron core is carried out by using the hybrid finite element–boundary element (FE‐BE) method combined with the fast multipole method (FMM) based on diagonal forms for translation operators. The computational costs and accuracy of two kinds of homogenization methods are discussed, comparing them with the reference solution. As a consequence, it is verified that the homogenization methods can analyze magnetic fields in laminated iron core within acceptable computational costs. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 170(1): 26–35, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20809     

Ionic liquid enables simple and rapid sample preparation of human culturing cells for scanning electron microscope analysis

Ionic liquid is a kind of salt that stays in a molten state even at room temperature. It does not vaporize at all in vacuum and facilitates electrical conductivity to the sample surfaces for observations with a scanning electron microscope (SEM). In this study, we used an ionic liquid in SEM for the first time to observe fixed human culture cells. The condition for the cell culture using wrapping sheets and SEM settings were varied to elucidate the optimized protocol. Compared to samples prepared by the conventional way, the ionic liquid‐treatment of samples gave SEM images of the cellular ultra structures in more detail, enabling observation of microvilli that made bridges between separated cells. In addition, the ionic liquid treatment is less time consuming as well as less laborious compared with the conventional way that includes dehydration, drying, and conductivity treatments. Totally, we concluded the ionic liquid is a useful reagent for SEM sample preparation. Microsc. Res. Tech., 2011. © 2010 Wiley‐Liss, Inc.