Stent endoprosthesis for obstructing colorectal cancers

We present the case of a patient in whom hypotension, sudden cardiopulmonary arrest, and coma developed after a massive dose of a seemingly harmless cathartic agent. The diagnosis of hypermagnesemia was made 9 hours after the patient's admission, when the serum magnesium concentration was 21.7 mg/dL (8.9 mmol/L). The patient's condition improved with IV calcium, saline solution infusion, and cardiorespiratory support. The elimination half-life of magnesium in this case was 27.7 hours. Few cases have been reported in which patients have survived with serum levels greater than 18 mg/dL (7.4 mmol/L). This case provides evidence that hypermagnesemia may occur in patients with normal kidney function. The diagnosis of hypermagnesemia should be considered in patients who present with symptoms of hyporeflexia, lethargy, refractory hypotension, shock, prolonged QT interval, respiratory depression, or cardiac arrest.     

Stabilization of bioethanol recovery with silicone rubber‐coated ethanol‐permselective silicalite membranes by controlling the pH of acidic feed solution

In order to produce highly concentrated bioethanol by pervaporation using an ethanol‐permselective silicalite membrane, techniques to suppress adsorption of succinic acid, which is a chief by‐product of ethanol fermentation and causes the deterioration in pervaporation performance, onto the silicalite crystals was investigated. The amount adsorbed increased as the pH of the aqueous succinic acid solution decreased. The pervaporation performance also decreased with decreasing pH when the ternary mixtures of ethanol/water/succinic acid were separated. Using silicalite membranes individually coated with two types of silicone rubber, pervaporation performance was significantly improved in the pH range of 5 to 7, when compared with that of non‐coated silicalite membranes in ternary mixtures of ethanol/water/succinic acid. Moreover, when using a silicalite membrane double‐coated with the two types of silicone rubber, pervaporation performance was stabilized at lower pH values. In the separation of bioethanol by pervaporation using the double‐coated silicalite membrane, removal of accumulated substances having an ultraviolet absorption maximum at approximately 260 nm from the fermentation broth proved to be vital for efficient pervaporation. Copyright © 2005 Society of Chemical Industry     

STRUCTURE FORMATION OF COATED FILMS WITH DISPERSED PIGMENTS DURING DRYING

In the drying of coated films with dispersed pigments, such as floppy disks, the structure of the film is formed during the drying process and depends on the drying condition. It is important to understand the structure formation during drying for the design of the dryer and die better quality of the product. We measured die drying characteristics of the film and determined the structure of dried film experimentally. A qualitative model for the structure formation during drying of the coated film is suggested.     

Syntheses and structural properties of four Rb-aluminosilicate zeolites

Four types of Rb-aluminosilicate zeolites were hydrothermally synthesized in pure phase for the first time from Rb-aluminosilicate gels without using any organic structure-directing agent (SDA) under stirring conditions. The crystal structure of each zeolite was refined by Rietveld analysis of the X-ray diffraction (XRD) data. These crystal structures were confirmed to be Rb-mordenite, Rb-merlinoite, a new aluminosilicate zeolite with an ATT framework topology, and Rb-offretite denoted by RMA-1, RMA-2, RMA-3, and RMA-4, respectively. The Si/Al ratio of RMA-1 with an MOR topology varied from 5.3 to 8.0; however, the variation of the Si/Al ratios of the other zeolites was rather small. The crystal system of RMA-2 was tetragonal with space group I4/mmm, where two Rb sites were distributed at the center of an 8-membered ring (MR). On the other hand, two Rb sites in RMA-3 were located at the center of the 8-MR in small two cages. The structure of RMA-4 was identified as the OFF type with a local disorder or defect, which included a small amount of an intergrown ERI phase.     

Optical and magneto-optical properties of copper-nickel compound metal island films

The optical properties of copper Cu-Ni compound metal island (CMI) films composed of nanoclusters of an alloy of Cu and Ni have been experimentally investigated. The spectral characteristics of the Cu-Ni CMI films are intermediate between those of conventional Cu and Ni island films in visible and near-IR regions. In addition, the magneto-optic effect has been observed in the Cu-Ni CMI films. It is also shown that the Faraday rotation in the Cu-Ni CMI films can easily be controlled by selection of the mixture ratio of Cu and Ni.     

Incentive‐rewarding mechanism to stimulate activities in social networking services

We have developed an incentive‐rewarding mechanism that stimulates activities in social networking services (SNSs), including content uploading and link establishment. We particularly focus on changing the reward assignment ratio based on the different risks users perceive when uploading content with different privacy settings: public‐open and friend‐limited. Learning‐based simulation allowed us to observe that SNS activity, which we measured as the amount of browsed content within a certain period, can be controlled by a rewarding assignment ratio. We then analyzed how the amount of uploaded content and the increase of established links affect SNS activity. Results suggested that the optimal reward assignment ratio to maximize SNS activity changes depending on the total amount of available reward resources. Copyright © 2011 John Wiley & Sons, Ltd.     

Supercritical fluid extraction of fungal oil using CO2, N2O,CHF3 and SF6

The extraction of oil from fungi (Mortierella ramanniana var.angulispora) was studied using carbon dioxide (CO₂), nitrous oxide (N₂O), trifluoromethane (CHF₃) and sulfur hexafluoride (SF₆) under supercritical conditions. The oil solubility was highest in SC-N₂O followed by SC-CO₂, while both SC-CHF₃ and SC-SF₆ showed poorer solvent power. The recorded oil solubilities at 333 K and 24.5 MPa were 2.3 wt% in N₂O, 0.48 wt% in CO₂, 0.0099 wt% in CHF₃ and 0.0012 wt% in SF₆. The oil solubilities in SC-N₂O and SC-CO₂ were measured over the pressure range 15.7–29.4 MPa and at temperatures ranging from 313–353 K. N₂O always showed greater solvent power than did CO₂ at the same temperature and pressure. The solvent power of a supercritical fluid increases with density at a given temperature, and increases with temperature at constant density. The change in neutral lipid composition of the extracted oil with the extraction ratio was measured. Free fatty acids or diglycerides were extracted more easily than triglycerides or sterol esters. The change in fatty acid composition was also measured. The proportion of γ-linolenic acid in the extract remained constant throughout the extraction.     

Semiconductor Passivation and Insulation Properties for Hydroxyl- and Fluoride-Free ZnO-SiO2-B2O3-Al2O3 Glasses Stabilized by Increased P2O5

F⁻- and OH⁻-free ZnO-B₂O₃-SiO₂-Al₂O₃-P₂O₅ glasses used for semiconductor-device passivation or insulation are investigated with regard to compositional dependencies for thermal expansion, viscosity points, and metal oxide semiconductor (MOS) capacitor properties. The experimental data show that thermal expansion increases, and flow points decrease, when P₂O₅ is substituted for B₂O₃. MOS capacitors passivated by OH⁻- and F⁻-free ZnO-based glasses exhibit normal capacitance-voltage curves.