Nanomaterials for radiotherapeutics-based multimodal synergistic cancer therapy

Over the past decade, numerous studies have attempted to enhance the effectiveness of radiotherapy (external beam radiotherapy and internal radioisotope therapy) for cancer treatment. However, the low radiation absorption coefficient and radiation resistance of tumors remain major critical challenges for radiotherapy in the clinic. With the development of nanomedicine, nanomaterials in combination with radiotherapy offer the possibility to improve the efficiency of radiotherapy in tumors. Nanomaterials act not only as radiosensitizers to enhance radiation energy, but also as nanocarriers to deliver therapeutic units in combating radiation resistance. In this review, we discuss opportunities for a synergistic cancer therapy by combining radiotherapy based on nanomaterials designed for chemotherapy, photodynamic therapy, photothermal therapy, gas therapy, genetic therapy, and immunotherapy. We highlight how nanomaterials can be utilized to amplify antitumor radiation responses and describe cooperative enhancement interactions among these synergistic therapies. Moreover, the potential challenges and future prospects of radio-based nanomedicine to maximize their synergistic efficiency for cancer treatment are identified.

     

500 kV 开关弹簧机构支架螺栓断裂的原因分析及处理

HPL500B2型弹簧机构支架(BA)螺栓断裂可能导致开关分合闸失败,对其原因进行分析,发现BA螺栓由于预紧固力矩过大,接近其扭断力矩,使得作用在BA螺栓上的力偏高,BA螺栓安全系数仅为12%,安全系数较低。列出BA螺栓更换步骤及注意事项,并详细介绍分闸、合闸弹簧调整步骤,为类似事件的处理提供参考。     

三维姿态监测技术在地震测井中的应用

在地震测井施工中,为监测地下检波器的运动特征,需应用三维监测技术。首先从映射几何的角度深入分析OpenGL的三维监测技术,建立OpenGL虚拟场景,然后分析检波器模型内外方位元素的表达,利用三维绘图技术建立检波器的立体模型,最后对所获取的坐标数据进行快速的三维绘图技术处理,形成实时可靠的立体模拟界面。实验结果表明:检波器的方位角模拟精确度能保证在1°以内,满足后期简化数据处理的要求。该技术应用在地震测井中时,具有远程、可靠、无损检测等特点,为操作人员提供直观可靠的观测决策平台,并且结合实际需求能够扩展多种功能模块,可广泛应用于测井过程中方位数据的获取。     

前混合磨料射流锚杆拆除装置设计

介绍锚杆应用及常用的拆锚方法,针对现有前混合磨料射流退锚装置存在锚杆拆卸时间长、工人作业环境差、装置部件锈蚀维护性差等问题,提出了一种前混合磨料射流退锚改进装置,并进行现场试验,结果表明,所改进设计装置具有退锚时间短、对工人伤害小、操作简便、部件维护周期长和无需专门配备泵站等特点,对进一步提高锚杆拆除效率具有重要参考价值。     

冷轧平整机机前甩尾轧制工艺的开发与应用

本文介绍了柳钢冷轧板带厂1550 mm单机架平整机机前甩尾轧制的工艺。改进前轧制每卷钢卷生产效率低,钢卷成材率低,改进后生产效率、成材率明显提高,部分规格的钢卷能实现带尾剪切长度为零。     

Cerebral microbleeds and cognitive decline in a hemodialysis patient: Case report and review of literature

Cerebral microbleeds (CMBs) are small hemosiderin deposits indicative of prior cerebral microscopic hemorrhage and previously thought to be clinically silent. Recent population‐based cross‐sectional studies and prospective longitudinal cohort studies have revealed association between CMB and cognitive dysfunction. In the general population, CMBs are associated with age, hypertension, and cerebral amyloid angiopathy. In the chronic kidney disease (CKD) population, diminished estimated glomerular filtration rate has been found to be an independent risk factor for CMB, raising the possibility that a uremic milieu may predispose to microbleeds. In the end‐stage renal disease (ESRD) population on hemodialysis, the incidence of microbleeds is significantly higher compared with a control group without history of CKD or stroke. We present an ESRD patient on chronic hemodialysis with a history of gradual cognitive decline and progressive CMBs. Through this case and literature review, we illustrate the need to develop detection and prediction models to treat this frequent development in ESRD patients.     

矿山工程施工 “车间式”管理模式的构建与应用

为规范矿山工程施工项目管理，提升其管理水平及效率，运用组织论的相关理论，研究了项目管理的职能组织结构模式的不足，指出了施工方项目管理普遍存在的现实问题，并在分析矿山工程施工管理现状的基础上，创新性地提出了矿山工程施工“车间式”管理组织结构模式，阐述了其特性特点，最终结合施工管理过程中的主要矛盾总结出了主要做法。“车间式”管理组织机构模式已应用于司家营常峪铁矿工程施工实践中，明显地提升了矿山工程施工管理效率和管理质量，同时降低了项目管理成本，具有较强的借鉴意义，值得推广应用。     

丙烷脱沥青装置调合前沥青的综合利用

在丙烷脱沥青装置加热炉试烧装置自产调合前沥青,通过观察油枪雾化沥青的能力、火嘴的燃烧情况以及燃烧后的烟尘状况,筛选出适合沥青燃烧的油枪,最终实现调合前沥青直接做加热炉燃料、减少重油出厂量的目的。     

一种基于Spark的不确定数据集频繁模式挖掘算法

如何在海量不确定数据集中提高频繁模式挖掘性能是目前研究的热点.传统算法大多是以期望、概率或者权重等单一指标为数据项集支持度，在大数据背景下，同时考虑概率和权重支持度的算法难以兼顾其执行效率.为此，本文提出一种基于Spark的不确定数据集频繁模式挖掘算法（UWEFP），首先，为了同时兼顾数据项的概率和权重，计算一项集的最大概率权重值并进行剪枝；然后，为了减少对数据集的多次扫描，结合Spark框架的优点，设计了一种具有FP-tree特征的新颖的UWEFP-tree结构进行模式树的构建及挖掘；最后在Spark环境下，以UCI数据集进行实验验证.实验结果表明本文的方法在保证挖掘结果的同时，提高了效率.