Preparation of Aragonite Whiskers

A simple synthetic method for preparing aragonite whiskers has been developed. A suspension of CaCl₂-MgCl₂-Mg(OH)₂ with pH ∼9 has been prepared by adding Ca(OH)₂ to MgCl₂ aqueous solution. CaCO₃ whiskers (aragonite phase) have been prepared easily by blowing CO₂-containing gas into the suspension. The whiskers have high aspect ratios ranging from 20 to 80 with diameters of 0.5–1 μm .     

Two‐way multi‐view 2‐D/3‐D display combining LC lens and HVxDP panel using novel pixel arrangement

We have developed a two‐way multi‐view 2‐D/3‐D display combining a liquid crystal lens and horizontally and vertically x times‐density pixels (HVxDP) arrangement. The two‐way multi‐view display features the same display resolution in 2‐D and 3‐D modes and a quite small color moiré for landscape and portrait, respectively, when using the HVxDP arrangement. In this paper, we realized suitable 3‐D properties for achieving a good balance between 3‐D moiré and 3‐D crosstalk for landscape and portrait by a two‐way liquid crystal lens with two kinds of focal lengths for the edge part and the center part of the lens.     

RUNA: a multimodal command language for home robot users

This article describes a multimodal command language for home robot users, and a robot system which interprets users’ messages in the language through microphones, visual and tactile sensors, and control buttons. The command language comprises a set of grammar rules, a lexicon, and nonverbal events detected in hand gestures, readings of tactile sensors attached to the robots, and buttons on the controllers in the users’ hands. Prototype humanoid systems which immediately execute commands in the language are also presented, along with preliminary experiments of faceto-face interactions and teleoperations. Subjects unfamiliar with the language were able to command humanoids and complete their tasks with brief documents at hand, given a short demonstration beforehand. The command understanding system operating on PCs responded to multimodal commands without significant delay. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Success rates in a multimodal command language for home robot users

This article considers the success rates in a multimodal command language for home robot users. In the command language, the user specifies action types and action parameter values to direct robots in multiple modes such as speech, touch, and gesture. The success rates of commands in the language can be estimated by user evaluations in several ways. This article presents some user evaluation methods, as well as results from recent studies on command success rates. The results show that the language enables users without much training to command home robots at success rates as high as 88%–100%. It is also shown that multimodal commands combining speech and button-press actions included fewer words and were significantly more successful than single-modal spoken commands.     

Development of fault cause estimation method for distribution line

We are planning to develop the new Advanced Distribution Automation System (ADAS) equipped with optical communication network and sectionalizer with sensor for more grid reliability and efficiency on maintenance operation. The new system is featured with the function of fault cause or damaged part estimation. The new sectionalizer captures the waveform of electrical line surge originated by fault and the system analyzes the waveform for this function. This paper mainly introduces the system configuration of ADAS and an early stage examination of fault cause estimation technology.     

Development of Reference Shunt for Short‐Time Alternating High Current Tests and Study of Measuring System

Short‐circuit tests for power circuit breakers and others require alternative short‐time current measurement, from a few kA to over several tens kA. However, the reference measurement system as a national standard or a specified secondary standard instrument to directly perform comparative test as a complete calibration test in high current class has not yet been established globally. The Japan Short‐Circuit Testing Committee (hereinafter referred to as “JSTC”) has therefore developed a shunt resistor that can be used as a standard instrument for high current measurement. Reference system using this shunt resistor is also considered by JSTC. The performance of the newly developed shunt resistor has been checked through several methods, such as resistance measurement, high power current test, high frequency current test, temperature rise test, and interference test. The results of the tests proved satisfactory performance. Resistance of the shunt resistor before and after the tests was invariant and stable. This makes the shunt resistor adequate for a reference in practical use. In addition, evaluation of uncertainty of the whole reference system including this shunt resistor satisfactorily fulfills the requirements of IEC 62475 edition 1.0, 2010.     

Natural language understanding based on mental image description language <Emphasis Type="Italic">L</Emphasis><Subscript><Emphasis Type="Italic">md</Emphasis></Subscript> and its application to language-centered robot manipulation

The authors have been working on natural language understanding based on the knowledge representation language L _md and its application to robot manipulation by verbal suggestion. The most remarkable feature of L _md is its capability of formalizing spatiotemporal events in good correspondence with human/robotic sensations and actions, which can lead to integrated computation of sensory, motory and conceptual information. This paper describes briefly the process from text to robot action via semantic representation in L _md and the experimental results of robot manipulation driven by verbal suggestion. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

ESTIMATION OF DAILY INTAKE OF FOUR KINDS OF TRIHALOMETHANE BY JAPANESE HOUSEWIVES

Duplicate portions of the daily meals consumed by 30 housewives were collected for 3 consecutive days in the cities of Nagoya and Yokohama in Japan.
Meals were analyzed for chloroform, bromodichloromethane (BDCM), chlorodibromomethane (CDBM) and bromoform by using a purge-trap procedure. The average concentration (and the range) of these four kinds of trihalomethane in each of the 24 h duplicate meals were, chloroform 19.6±18.1 ppb(n.d.-106.8 ppb), BDCM 0.3±0.3 ppb(n.d.-1.7 ppb), CDBM 0.1±0.2 ppb(n.d.-0.6 ppb) and bromoform 0.5±1.3 ppb(n.d.-8.1 ppb).
The mean daily dietary intake of the four kinds of trihalomethane by housewives were, chloroform 40.0±25.4 μg, BDCM 0.6±0.5 μg, CDBM 0.3±0.3 μg and bromoform 0.9±1.3 μg.     

Preparation and biological evaluation of hydroxyapatite-coated nickel-free high-nitrogen stainless steel

Calcium phosphate was formed on nickel-free high-nitrogen stainless steel (HNS) by chemical solution deposition. The calcium phosphate deposition was enhanced by glutamic acid covalently immobilized on the surface of HNS with trisuccinimidyl citrate as a linker. X-ray diffraction patterns and Fourier transform infrared spectra showed that the material deposited on glutamic acid-immobilized HNS within 24 h was low-crystallinity calcium-deficient carbonate-containing hydroxyapatite (HAp). The biological activity of the resulting HAp-coated HNS was investigated by using a human osteoblast-like MG-63 cell culture. The HAp-coated HNS stimulated the alkaline-phosphate activity of the MG-63 culture after 7 days. Therefore, HAp-coated HNS is suitable for orthopedic devices and soft tissue adhesion materials.