Electric field effects on roto-vibrational transitions of13CD3OH1

We used a Stark-Optoacoustic cell and hybrid waveguide resonators to perform an Infrared and Far Infrared Stark Spectroscopy study on some transitions of¹³CD₃OH. Different behaviours of the transitions in the presence of a d.c. electric field were observed. The Stark splittings of six FIR laser lines ranging from 34 to 136 MHz/kVcm^?1 were determined. The analysis of the behaviour of the IR and FIR transitions in the presence of the external electric fields gives important and exclusive information on the levels involved in the transitions.     

Investigation for long wavelength fir laser lines for EPR studies: New lines from CH2=CF2

The results described in this work are part of a systematic search for long wavelength laser lines to be used in high magnetic field EPR applications and in plasma diagnostic. Four new far-infrared laser lines of CH₂ = CF₂ (1,1 difluoroethylene), optically pumped by a waveguide CO₂ laser, have been discovered and characterized in wavelength, polarization relative to the pumping radiation and offset relative to the CO₂ center frequency. New measurements of polarization and offset of 5 already known laser lines are also reported. A table of all of the known CO₂ pumped FIR laser lines from this molecule is given.     

Pneumocystis carinii pneumonia in preterm infants: report of two cases successfully diagnosed by non-bronchoscopic bronchoalveolar lavage

We present two cases of Pneumocystis carinii pneumonia in apparently immunocompetent preterm infants presenting with unexplained respiratory distress associated with a predominantly interstitial process on the chest radiograph. Definite diagnosis was promptly established on the detection of cyst forms in the lung fluid obtained by non-bronchoscopic bronchoalveolar lavage, and a favourable outcome was achieved.     

From real to metaphoric maps: Cartography as a visual language for organizing and sharing knowledge

In this paper we discuss about geographic representations as a basis for describing, organizing, accessing and understanding heterogeneous shared information on the web. Maps are popular on the web, because of the reference to space, the most important domain of human experience, the proliferation of location aware devices and services and the availability of a set of tools that enable an heterogeneous population of users to explore and even modify these representations.Metaphorical maps, representing concepts and relations of a specific knowledge domain with symbols taken from another well known and widely used domain, couple the benefits of cartographic representation with the power and intuitiveness of the metaphor, permitting the communication and sharing of such knowledge.We introduce a classification of maps based on antinomies between real and imaginary worlds, and between direct and metaphoric knowledge; we argue that cartography can be used as a visual language for organizing and sharing knowledge related to different semantic domains, supporting our arguments with examples. Finally, we define a set of functions and related data structures able to support a user in browsing cartographic representations using state-of-art tools and systems available on the web.     

Constructive model-based analysis for safety assessment

The aerospace industry still uses fault trees to perform reliability analysis. This is because fault-tree modeling and analysis (FTA) seems easier to practical engineers when compared with Markov models, even though FTA provides a weaker form of analysis. In this paper, we propose an automatic strategy for generating Markov-based models and corresponding analysis formulations, according to ARP 4761, directly from Simulink diagrams annotated with failure information. The generated Markov-based models are expressed in the formal language PRISM, and the analysis is carried out by the PRISM model checker. The strategy is compositional and based on a comprehensive set of translation rules from Simulink to PRISM. We briefly address soundness and completeness of the rules and, to illustrate the application of the strategy, we apply it to a classical avionics case study: an actuator control system.     

Comparative analysis of methods for determining the metabolic rate in order to provide a balance between man and the environment

The incorrect determination of metabolic rate can be linked to discrepancies between the model of the PMV (Predicted Mean Vote) and real thermal sensation collected in field studies. Aiming to improve the correlation of the PMV model and the real thermal sensation, this work established new values for the metabolic rate: one way being called “calculated” using Newton's Method and the other called "measured" using a metabolic analyzer. Welder's activities were evaluated, through the measurements of environmental and personal variables. New values of metabolic rate were determined for this activity. The values found for the calculated form and the measured one were, respectively, 178.63 and 145.46 W/m², different from the range provided by the table of ISO 8996 (2004) for this activity (75–125 W/m²). In order to verify which of the values of the metabolic rate was closer to the real thermal sensation of PMV, a linear regression was made between the PMV and the real thermal sensation in three ways: S × PMV_tabulated (R² = 0.1749), S × PMV_calculated (R ² = 0.7481) and S × PMV_measured (R² = 0.7854). It was found that the values measured by the instrument gave a higher coefficient of determination which was chosen for the correction of the table. The correction of the table provides a value of M_predicted, that is a value of metabolic rate that corrects the values provided by the tables of ISO 8996 (2004), by means of a correction coefficient. For the welder's activities in a metal-mechanics industry, tabulated values can be multiplied by the correction coefficient 1.4648 in order to minimize inaccuracies. The PMV_predicted, obtained through the M_predicted, when related to the actual thermal sensation, provides a coefficient of determination of 0.7511, thereby improving the model of the PMV.     

Acidolysis of babassu fat catalyzed by immobilized lipase

The lipase-catalyzed interesterification of oils and fats gives products that are unobtainable by chemical interesterification methods. Acidolysis of babassu fat and palmitic acid, catalyzed by immobilized lipase (Lipozyme; Novo Industri, Bagsveard, Denmark), was studied. The reactions were performed at 65°C with 5% w/w enzyme for 4 h. The molar proportions of babassu fat/palmitic acid were 1∶0.1, 1∶0.3 and 1∶0.5. At the end of the reaction period, the catalyst particles were removed by filtration, and the residual oil was extracted with organic solvent (diethyl ether). The recovered particles were then reused. The palmitic acid content of babassu fat before and after acidolysis changed from 10 to 22% at a molar proportion of 1∶0.5. The equilibrium was attained in about 4 h. The original water and enzymatic activities of Lipozyme were maintained after acidolysis. Water sorption isotherms of the immobilized enzyme were determined at 25, 35 and 45°C. From the temperature dependence of the isotherms, isosteric heats of sorption were evaluated by means of the Clausius Clapeyron equation. Monolayer moisture content was calculated by means of the B.E.T. and Guggenhein-Anderson-De Boer analyses. Paper presented at the International Meeting on Fats and Oils Technology, Universidade Estadual de Campinas, Brazil, 1991.     

Practical and theoretical molecular weights in polyaddition reactions of ethylene and propylene oxide

The addition reactions of ethylene oxide and/or propylene oxide catalyzed by KOH and initiated with compounds containing free hydroxyls are followed by secondary reactions which vary the expected molecular weight. By using ethylene oxide, diols are formed and by using propylene oxide, both diols and unsaturated monofunctional compounds are formed. These products are usually characterized by their hydroxyl number. The average molecular weight is found by taking into consideration the starter functionality only. There are often some behavioral differences among similar products owing to the different quantity and chain length of the secondary products contained therein. The secondary products are analyzed and the quantity of the secondary products were determined from the hydroxyl number values and from the unsaturation of reagents and products. In the case of monofunctional adducts using the calculation method, the results have been experimentally confirmed.