Survey of acceptor dopants in SrTiO3: Factors limiting room temperature hole concentration

Unintentional impurities often found in strontium titanate (doped or undoped) have hindered efforts to study individual impurities experimentally. To fill this gap, a computational survey of acceptor-type point defects of common intentional or unintentional impurities (Al, Cu, Fe, K, Mg, Mn, N, Na, Ni, and Zn) is presented. Utilizing defect formation energies from density functional theory using hybrid exchange correlation functionals in a grand canonical model of the defect chemistry, the equilibrium Fermi level (μ_e) was calculated as a function of processing conditions for pure SrTiO₃, SrTiO₃ individually doped with each impurity, and SrTiO₃ co-doped with Al and N. Above a certain concentration, each impurity reduced the maximum predicted hole concentration relative to the intrinsic case. Al, Mg, Zn, K, and Na exhibited similar trends and behaved more like ideal acceptors while N, Ni, Fe, Mn, and Cu were all unique and pinned μ_e near or above the mid-gap in most conditions. Al/N:SrTiO₃ also exhibited similar trends at 800°C for all Al/N ratios, but more variation at 25°C. Additionally, the behavior of Al:SrTiO₃ was not recovered until Al/N = 10⁴. This suggests that to achieve SrTiO₃ with free holes at room temperature, the concentration of most impurities must be controlled.     

Noninvasive Assessment of Human Gastric Motor Function

A noninvasive technique to monitor gastric electrical activity (GEA) and mechanical activity as an aid in assessing gastric motor function is presented. The GEA is measured with ordinary ECG electrodes located on the torso in the region above the stomach. The mechanical activity is recorded through an electrical impedance monitoring device. A study of a mathematical model of the electrically active antral part of the stomach in the body revealed that the waveform of the extracorporeally measured signals can be related to the direction of propagation of the GEA. This feature was confirmed experimentally.     

Measles-mumps-rubella and hepatitis B vaccination uptake in adolescents: a survey in metropolitan Melbourne

Serum levels of free, acyl, and total carnitine were determined in 32 patients with seizures, before and after 3, 6, and 12 months of treatment with valproic acid (17 patients), carbamazepine (10 patients), or phenobarbital (5 patients). In all three treated groups, both free and total carnitine levels showed a significant decline with respect to pretreatment levels. This decline was most marked and most consistent in patients treated with valproic acid. In 35% of the patients in this group, carnitine deficiency (ie, total carnitine < 30 micromol/L) was observed by month 12. In none of the three groups were serum carnitine levels significantly correlated with the serum concentration of the drug. These findings suggest a need to monitor serum carnitine levels in children treated with any of these drugs.     

Distinctive physical effects and applications approaching the relativistic lambda-cubed regime

Using small amounts of optical energy, it is possible to drive matter with relativistic intensity. We show unique energy transport properties, X-ray production, and efficient attosecond phenomena coming from microscopic plasmas driven by precisely focused ultrashort pulses of light.     

An active feedback system for isotonic studies of smooth muscle

A feedback system used to perform isotonic studies of smooth muscle is presented. This system is capable of applying a constant force to muscle samples regardless of their contractile activities. The force applied to the tissue is controlled using a proportional integral control system that drives a linear motor. The device is integrated into a sucrose gap tissue bath apparatus where measurements of displacement and electrical activity are also possible. The frequency of canine colonic smooth-muscle electrical oscillations is positively related to applied force.     

Quantification and identification of particle movement in epidermis after thermal injury

Skin samples from a rabbit hind limb were taken from controls and at 5 min, 2 and 6 hr after a mild thermal injury (60 degrees C for 1 min). Large aggregates of intercellular particles, usually ribosomal in appearance, were seen in 6 hr samples and were accompanied by some peripheral aggregates of particles and by granule-coated vesicles. These structures were present in earlier samples to a lesser extent and were absent from control material. Quantitative assessment showed that intercellular particles apparently increased up to 6 hr whereas peripheral aggregation was maximum at 2 hr. Histochemical analysis confirmed that the particles contained ribonucleoprotein. Other larger particles were seen occasionally and contained carbohydrate. Lymph draining the site showed cellular changes, little change in enzyme activities, and no aggregates of particles.     

Characterization of Aluminum Nanopowder Compositions

The thermal behaviour of two different Al nanopowders and a micron‐sized Al powder was studied using DSC, simultaneous TG‐DTA, and accelerating rate calorimetry (ARC). The results show that the reactivity of Al powder increases as the particle size decreases. The thermal stability of the smaller Al nanopowder (Als) in water and in a humid atmosphere was determined using ARC and TG‐DTA, respectively. Atomic Absorption Spectrometry (AAS), X‐Ray Photoelectron Spectrometry (XPS) and Auger Electron Spectrometry (AES) were used to characterize the surface chemistry of Alex. The outgassing behaviour for mixtures of RDX and the various Al powders was investigated using TG‐DTA‐FTIR‐MS. Evolution of NO₂ and N₂O from a chemical interaction between Al nanopowders and RDX was observed. The effect of Als and Alex on the thermal stability of TNT, RDX, Comp B, and AP was determined using ARC. Addition of Als significantly lowered the onset temperature for TNT and RDX decomposition. Electrostatic discharge (ESD) sensitivities of Al nanopowders and their mixtures with TNT, Comp B, RDX and AP were determined. The results show that the AP/Als mixture is very sensitive to ESD. Standard dust explosibility tests demonstrated that Alex is highly explosible.     

How green is my river? A new paradigm of eutrophication in rivers

Although the process of eutrophication is reasonably well understood in lakes, there is currently no conceptual understanding of how eutrophication develops in rivers. This issue is addressed here. A review of the main processes controlling the development of eutrophication in lakes has been carried out as a precursor to considering the effect in rivers. The importance of hydraulic flushing in controlling algal growth suggests that short-retention-time rivers will show different effects compared to long retention-time, impounded rivers. The latter are likely to operate like lakes, moving from macrophyte domination to phytoplankton domination whereas the former move to benthic and filamentous algal domination. Subsequently, a conceptual model of the development of eutrophic conditions in short-retention-time rivers is developed. Although there is general agreement in the literature that an increase in nutrients, particularly phosphorus, is a pre-requisite for the eutrophic conditions to develop, there is little evidence in short-retention-time rivers that the plant (macro and micro) biomass is limited by nutrients and a good case can be made that the interaction of hydraulic drag with light limitation is the main controlling factor. The light limitation is brought about by the development of epiphytic algal films on the macrophyte leaves. The implications of this conceptual model are discussed and a series of observable effects are predicted, which should result if the model is correct.