Modeling of the Magnetization and Magnetocaloric Effect in Ni2MnGa Heusler Alloy with the Effective Field Theory

Journal of Low Temperature Physics - This study modeled and investigated the magnetocaloric effect in Ni2MnGa Heusler alloy characterized by its magnetic entropy change (ΔSm) and its...     

Analyzing the determinants of carbon emissions from transportation in European countries: the role of renewable energy and urbanization

Clean Technologies and Environmental Policy - The continuous growth of transport sector and the increase in carbon emissions from transportation attract the attention of policy makers in...     

Comparison of copper emission rates from wood treated with different preservatives to the environment

This study describes a laboratory method for the estimation of emission from preservative-treated wood in the different situations where emissions could enter the environment for use classes 3 (not in contact with ground) and 4 and 5 (in contact with the ground, fresh water or sea water) according to OECD Guidelines. Samples of scotch pine sapwood (Pinus sylvestris L.) were treated with CCA (1% and 2%), ACQ-1900 (3% and 7%), ACQ-2200 (2%), Tanalith E 3491 (2% and 2.8%), and Wolmanit CX-8 (2%).     

Accurate and simple synthesis formulas for coplanar waveguides

Simple and accurate closed‐form formulas obtained by using a differential evolution algorithm are presented for the synthesis of coplanar waveguides (CPW). The results of the synthesis formulas proposed in this article are compared with those of the quasi‐static analysis, the synthesis formulas reported by the other researchers and also the experimental works available in the literature. The accuracy of the proposed synthesis formulas is found to be better than 0.75% for 9256 CPWs samples. © 2008 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2008.     

A novel chaotic Henry gas solubility optimization algorithm for solving real-world engineering problems

The paper proposes a novel metaheuristic based on integrating chaotic maps into a Henry gas solubility optimization algorithm (HGSO). The new algorithm is named chaotic Henry gas solubility optimization (CHGSO). The hybridization is aimed at enhancement of the convergence rate of the original Henry gas solubility optimizer for solving real-life engineering optimization problems. This hybridization provides a problem-independent optimization algorithm. The CHGSO performance is evaluated using various conventional constrained optimization problems, e.g., a welded beam problem and a cantilever beam problem. The performance of the CHGSO is investigated using both the manufacturing and diaphragm spring design problems taken from the automotive industry. The results obtained from using CHGSO for solving the various constrained test problems are compared with a number of established and newly invented metaheuristics, including an artificial bee colony algorithm, an ant colony algorithm, a cuckoo search algorithm, a salp swarm optimization algorithm, a grasshopper optimization algorithm, a mine blast algorithm, an ant lion optimizer, a gravitational search algorithm, a multi-verse optimizer, a Harris hawks optimization algorithm, and the original Henry gas solubility optimization algorithm. The results indicate that with selecting an appropriate chaotic map, the CHGSO is a robust optimization approach for obtaining the optimal variables in mechanical design and manufacturing optimization problems.

     

A combo technology of autotrophic and heterotrophic denitrification processes for groundwater treatment

In this study,a sequential process (heterotrophic up-flow column and completely mixed membrane bioreactors) was proposed combining advantages of the both processes.The system was operated for 249 days with simulated and real groundwater for nitrate removal at concentrations varying from 25 to 145 mg·L-1 NO3-N.The contribution of heterotrophic process to total nitrate removal in the system was controlled by dozing the ethanol considering the nitrate concentration.By this way,sulfur based autotrophic denitrification rate was decreased and the effluent sulfate concentrations were controlled.The alkalinity requirement in the autotrophic process was produced in the heterotrophic reactor,and the system was operated without alkalinity supplementation.Throughout the study,the chemical oxygen demand in the heterotrophic reactor effluent was (23.7 ± 22) mg·L-1 and it was further decreased to(7.5 ± 7.2) mg·L-1 in the system effluent,corresponding to a 70％ reduction.In the last period of the study,the real groundwater containing 145 mg·L-1 NO3-N was completely removed.Membrane was operated without chemical washing in the first 114 days.Between days 115-249 weekly chemical washing was required.     

HYDRODYNAMIC STUDIES IN A HALF SLOT-RECTANGULAR SPOUTED BED COLUMN

Experiments were carried out in a half slot-rectangular spouted bed to investigate the effects of slot width and lower section basal angle on column hydrodynamics. Flow regimes, minimum spouting velocity, spouting and maximum pressure drops, and maximum spoutable bed height were determined for 4 mm diameter polyethylene particles. The results are compared with those for conventional cylindrical and rectangular spouted beds. Correlations for each hydrodynamic parameter are developed and compared with equations available in the literature.     

A Comparative Study of Non-traditional Methods for Vehicle Crashworthiness and NVH Optimization

In this paper, metamodeling and five well-known metaheuristic optimization algorithms were used to reduce the weight and improve crash and NVH attributes of a vehicle simultaneously. A high-fidelity full vehicle model is used to analyze peak acceleration, intrusion and component’s internal-energy under Full-Frontal, Offset-Frontal, and Side crash scenarios as well as vehicle natural frequencies. The radial basis functions method is used to approximate the structural responses. A nonlinear surrogate-based mass minimization was formulated and solved by five different optimization algorithms under crash-vibration constraints. The performance of these algorithms is investigated and discussed.     

Hybrid Taguchi-differential evolution algorithm for optimization of multi-pass turning operations

Hybridizing of the optimization algorithms provides a scope to improve the searching abilities of the resulting method. The purpose of this paper is to develop a novel hybrid optimization algorithm entitled hybrid robust differential evolution (HRDE) by adding positive properties of the Taguchi's method to the differential evolution algorithm for minimizing the production cost associated with multi-pass turning problems. The proposed optimization approach is applied to two case studies for multi-pass turning operations to illustrate the effectiveness and robustness of the proposed algorithm in machining operations. The results reveal that the proposed hybrid algorithm is more effective than particle swarm optimization algorithm, immune algorithm, hybrid harmony search algorithm, hybrid genetic algorithm, scatter search algorithm, genetic algorithm and integration of simulated annealing and Hooke-Jeevespatter search.