Simultaneous solving of balancing and sequencing problems with station-dependent assembly times for mixed-model assembly lines

In spite of many studies, investigating balancing and sequencing problems in Mixed-Model Assembly Line (MMAL) individually, this paper solves them simultaneously aiming to minimize total utility work. A new Mixed-Integer Linear Programming (MILP) model is developed to provide the exact solution of the problem with station-dependent assembly times. Because of NP-hardness, a Simulated Annealing (SA) is applied and compared to the Co-evolutionary Genetic Algorithm (Co-GA) from the literature. To strengthen the search process, two main hypotheses, namely simultaneous search and feasible search, are developed contrasting Co-GA. Various parameters of SA are reviewed to calibrate the algorithm by means of Taguchi design of experiments. Numerical results statistically show the efficiency and effectiveness of the proposed SA in terms of both the quality of solution and the time of achieving the best solution. Finally, the contribution of each hypothesis in this superiority is analyzed.     

Fatigue behaviour and modelling of talc‐filled and short glass fibre reinforced thermoplastics,including temperature and mean stress effects

Effects of temperature and mean stress on fatigue behaviour of talc‐filled polypropylene (PP‐T) and short glass fibre reinforced polypropylene (PP‐G), polyamide‐66 (PA66), and a blend of polyphenylene ether and polystyrene (PPE/PS) were investigated. Load‐controlled fatigue tests were conducted under positive stress ratios (R = 0.1 and 0.3) and at several temperatures (T = 23, 85 and 120 °C). Larson–Miller parameter was used and a shift factor of Arrhenius type was developed to correlate fatigue data at various temperatures. Effect of mean stress on fatigue life was significant for some of the studied materials; however, for the PPE/PS blend no effect of mean stress was observed. Modified Goodman and Walker mean stress equations were evaluated for their ability to correlate mean stress data. A general fatigue life prediction model was also used to account for the effects of mean stress, temperature, anisotropy and frequency.     

Parallel-machine scheduling problems with sequence-dependent setup times using an ACO,SA and VNS hybrid algorithm

This paper proposes a hybrid metaheuristic for the minimization of makespan in scheduling problems with parallel machines and sequence-dependent setup times. The solution approach is robust, fast, and simply structured, and comprises three components: an initial population generation method based on an ant colony optimization (ACO), a simulated annealing (SA) for solution evolution, and a variable neighborhood search (VNS) which involves three local search procedures to improve the population. The hybridization of an ACO, SA with VNS, combining the advantages of these three individual components, is the key innovative aspect of the approach. Two algorithms of a hybrid VNS-based algorithm, SA/VNS and ACO/VNS, and the VNS algorithm presented previously are used to compare with the proposed hybrid algorithm to highlight its advantages in terms of generality and quality for large instances.     

The Assessment of Fracture Geometrical Properties on the Performance of Conventional In Situ Combustion

Abstract

The aim of the present work is to evaluate the effect of fractures geometrical properties such as orientation, density, location, and networking on the conventional fire flooding (CFF) process performance through simulation analysis. Combustion parameters of a fractured low-permeable carbonate heavy oil reservoir in Iran called Kuh-E-Mond (KEM); applied for simulation study and simulator has been validated with KEM combustion tube experimental data. The validated model was modified to study CFF in 3D semi-scaled combustion cells. Simulation results confirmed that CFF is more feasible in the case of densely fractured reservoirs such as those in the Middle East.     

The use of biomass and stillage recycle in conventional ethanol fermentation

Modifications of the conventional ethanol fermentation process using biomass and stillage recycle were investigated and the advantages of the technique were studied. The biomass recycle method resulted in a reduction in the use of approximately 8% raw material (molasses). The recycle of 15–70% of stillage (dealcoholised) from a previous fermentation was also tested successfully. Generally the results of these experiments revealed 13–47% less water consumption and consequently about 13–47% reduction of stillage volume, which was more economical for further treatments.     

Evaluation of TBM performance prediction models and sensitivity analysis of input parameters

Bulletin of Engineering Geology and the Environment - In recent years, anumber of models and formulas have been proposed to estimate the penetration rate of hard rock tunnel boring machines (TBMs)....     

Parallel merged multiplier-accumulator coprocessor optimized for digital filters

In an attempt to improve the speed of VLSI signal processing systems, a new architecture for a high-speed multiply-accumulate (MAC) unit optimized for digital filters is proposed. This unit is designed as a coprocessor for the LEON2 RISC processor [LEON2 Processor; 2005 [Online]. <http://www.gaisler.com/products/leon2/leon.html>]. In this work, four parallel MAC units with two dual-port coefficient register-files, a three-port general register-file and a control unit are included in the coprocessing block. With the existence of four parallel units, several SIMD format instructions have been added to LEON2 instruction set. Each MAC unit has two 16-bit inputs, 32-bit output register and a programmable round-saturate block. The MAC unit uses a new architecture which embeds the accumulate module within the partial products summation tree of the multiplier with minimum overhead. A central control unit controls inputs of the four MACs and loading of the output registers. Our experimental results demonstrate a high performance in implementation of digital filters at elevated speeds of up to 33 millions of input samples per second in a 0.18 μm technology.     

Comparison of stress field forming methods for vibro-acoustography

Vibro-acoustography is a method that produces images of the acoustic response of a material to a localized harmonic motion generated by ultrasound radiation force. The low-frequency, oscillatory radiation force (e.g., 10 kHz) is produced by amplitude modulating a single ultrasound beam, or by interfering two beams of slightly different frequencies. Proper beam forming for the stress field of the probing ultrasound is very important because it determines the resolution of the imaging system. Three beam-forming geometries are studied: amplitude modulation, confocal, and x-focal. The amplitude of radiation force on a unit point target is calculated from the ultrasound energy density averaged over a short period of time. The profiles of radiation stress amplitude on the focal plane and on the beam axis are derived. The theory is validated by experiments using a small sphere as a point target. A laser vibrometer is used to measure the velocity of the sphere, which is proportional to the radiation stress exerted on the target as the transducer is scanned over the focal plane or along the beam axis. The measured velocity profiles match the theory. The theory and experimental technique may be useful in future transducer design for vibro-acoustography.