Passive sensitization of human airways induces myogenic contractile responses in vitro

We assessed effects of passive sensitization on human bronchial smooth muscle (BSM) response to mechanical stretching in vitro. Bronchial rings were sham (control) or passively sensitized overnight by using sera from donors demonstrating sensitivity to Dermatophagoides farinae and having immunoglobulin E (IgE) concentrations of 2,600 +/- 200 U/ml. Tissues were fixed isometrically to force transducers to measure responses to electrical field stimulation (EFS) and quick stretch (QS). The myogenic response to QS was normalized to the maximal response to EFS (%EFS). The myogenic response of sensitized BSM was 47.9 +/- 10.9 %EFS to a QS of approximately 6.5% optimal length (Lo); sham-sensitized tissues had a myogenic response of 13.5 +/- 6.4 %EFS (P = 0.012 vs. passively sensitized). A QS of approximately 13% Lo in sensitized BSM caused a response of 82.8 +/- 20.9 %EFS; sham-sensitized tissues developed a response of 38.2 +/- 17.3 %EFS (P = 0.004). BSM incubated with serum from nonallergic donors did not demonstrate increased QS response (4.6 +/- 1.4 %EFS, P = not significant vs. tissue exposed to atopic sera). However, tissues incubated in sera from nonatopic donors supplemented with hapten-specific chimeric IgE (JW8) demonstrated augmented myogenic response to QS of approximately 6.5% Lo (21.9 +/- 6.2 %EFS, P = 0. 027 vs. nonatopic sera alone). We demonstrate that passive sensitization of human BSM preparations causes induction and augmentation of myogenic contractions to QS; this hyperresponsiveness corresponds to the IgE concentration in sensitizing sera.     

Ammoxidation of methylaromatics over vanadium phosphate catalysts II. Catalyst formation, active sites and reaction mechanism

The interactions of VOHPO₄· 0.5H₂O and (VO)₂P₂O₇ with the ammoxidation feed and the single components such as ammonia, oxygen, water and component mixtures were studied in detail using XRD and temperature-programmed reaction spectroscopy. The aim of this work was to improve the knowledge of the formation of the active phases or active sites of the catalysts from their precursors under the condition of the ammoxidation reaction. Similar catalytic properties of various applied VPO materials were discussed in terms of the presence of similar structure elements (domains of adjacent edge-sharing VO₆ octahedra-units and P-O-NH₄ groups).     

Experiences from Exporting Major Proof Assistant Libraries

The interoperability of proof assistants and the integration of their libraries is a highly valued but elusive goal in the field of theorem proving. As a preparatory step, in previous work, we translated the libraries of multiple proof assistants, specifically the ones of Coq, HOL Light, IMPS, Isabelle, Mizar, and PVS into a universal format: OMDoc/MMT. Each translation presented great theoretical, technical, and social challenges, some universal and some system-specific, some solvable and some still open. In this paper, we survey these challenges and compare and evaluate the solutions we chose. We believe similar library translations will be an essential part of any future system interoperability solution, and our experiences will prove valuable to others undertaking such efforts.

     

Microstructure and Microchemistry of Polymer-Derived Crystalline SiC Fibers

Stoichiometric and near-stoichiometric silicon carbide fibers, derived from the polymer polycarbosilane, have been characterized by scanning Auger and transmission electron microscope techniques. Excess carbon usually appeared in the fibers, but it could be eliminated by controlling processing conditions. The fibers consisted mainly of submicrometer-sized SiC microcrystals, with a considerably twinned and stacking-faulted β-SiC structure. Free carbon, which appeared in the form of graphite, was the only detectable intergranular phase in the nonstoichioinetric SiC fibers, while the stoichiometric SiC fibers contained no detectable second phase whatsoever.     

Frequency multiplexed superconducting quantum interference device readout of large bolometer arrays for cosmic microwave background measurements

A technological milestone for experiments employing transition edge sensor bolometers operating at sub-Kelvin temperature is the deployment of detector arrays with 100s-1000s of bolometers. One key technology for such arrays is readout multiplexing: the ability to read out many sensors simultaneously on the same set of wires. This paper describes a frequency-domain multiplexed readout system which has been developed for and deployed on the APEX-SZ and South Pole Telescope millimeter wavelength receivers. In this system, the detector array is divided into modules of seven detectors, and each bolometer within the module is biased with a unique ～MHz sinusoidal carrier such that the individual bolometer signals are well separated in frequency space. The currents from all bolometers in a module are summed together and pre-amplified with superconducting quantum interference devices operating at 4 K. Room temperature electronics demodulate the carriers to recover the bolometer signals, which are digitized separately and stored to disk. This readout system contributes little noise relative to the detectors themselves, is remarkably insensitive to unwanted microphonic excitations, and provides a technology pathway to multiplexing larger numbers of sensors.     

Statistically optimised method for detecting adult image groups

Adult image recognition is an important technique for preventing children from accessing offensive material on the Internet. Most of the related works focus on single image recognition. However, adult images usually exist as a group and rarely stand alone. Therefore, considering the entire image group as a whole for classification should be more effective. This paper presents a new method of detecting adult image groups, which aims at achieving optimal recognition accuracy. Adult image group recognition generally includes two components: an adult image recogniser and a final decision rule for classifying the image group. We provide a theoretical analysis to clarify the correlation of the two components and use probability formulae to estimate the recognition rates for different settings of the adult image recogniser and the decision rule. Then, a set of optimal receiver-operating characteristic (ROC) curves for different image numbers is solved. To recognise an unknown image group, a desired recall rate for adult (or benign) image groups is specified and the system is set according to the parameters acquired from the optimal ROC curves. The proposed method can be dynamically adapted to the recall rates that the user expects. This advantage makes the proposed system more suitable for real applications. Our work can be viewed as an extension of single image recognition and the experimental results demonstrate that it can attain higher recognition accuracy than the earlier methods.     

Chemikalienfreie Bekämpfung von Holzschädlingen durch dielektrische Erwärmung mit Radiowellen und Mikrowellen

Thermal pest control requires long treatment times due to the low thermal conductivity of wood and may lead to the formation of cracks. Here, the thermal treatment with radio waves as well as microwaves has been studied. The direct dielectric heating has the advantage of a good homogeneity. The obtained temperature profiles for radio waves were more homogeneous compared to microwaves. Detailed studies showed that elimination of pests was not related to the application of the electromagnetic field itself, but due to the temperature increase.     

Low temperature sintering of barium titanate ceramics assisted by addition of lithium fluoride-containing sintering additives

By addition of LiF-containing sintering additives to commercial BaTiO₃ powder, more than 98% of the theoretical density was reached at a sintering temperature of 900 °C both on powder compacts and laminates. Dielectric measurements were performed on ceramic samples in the temperature and frequency ranges from −20 °C to 125 °C and from 10³ to 10⁶ Hz, respectively. High relative permittivity (_r  3160) and low dielectric loss (tan δ  0.014) were measured for tapes of the favoured material. The breakdown strength for tapes with a thickness of about 80 μm is 30 kV/mm. The microprobe analysis showed, that no interfacial reaction between the dielectric layer and the Ag-electrode had occurred.The newly developed barium titanate ceramics completely densifying at 900 °C turned out to be promising for integration of buried capacitors in LTCC multilayers.