Antimicrobial residues survey by LC-MS in food-producing animals in Lebanon

ABSTRACT

The treatment of animals with antimicrobial products may lead to the contamination of edible tissues by their residues, which may represent a risk to human health. Therefore, this study aimed to determine the level of antimicrobial residues in food-producing animals (chicken, beef, and milk) in Lebanon. A total of 310 samples were collected and analysed using an LC-MS/MS for the determination of 48 compounds belonging to different families in order to map their compliance according to the European Commission decision 2002/657/EC. Results show that 60% of the analysed samples were not contaminated by any residue, while 12% presented a concentration higher than the MRLs for tetracyclines, sulphonamides, quinolones, and macrolides. Results revealed that chicken were the most contaminated by antimicrobial residues, when compared to beef and milk. The obtained results demonstrate the uncontrolled use of antimicrobials in some Lebanese farms and claim for better management of livestock.     

Determination of the vapor pressures of select polychlorinated dibenzo-p-dioxins and dibenzofurans at 75-275 °C

Vapor pressures were determined for several polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) at 75-275 °C, extending the available literature data to more relevant temperature regions and providing the first experimental data for 2,3,7-trichlorodibenzo-p-dioxin (2,3,7-TriCD). A modification of the effusion technique, based upon controlling the diffusion of the target compound and subsequent high resolution gas chromatography/low resolution mass spectrometry (HRGC/LRMS) analysis, was proven comparable to other accepted methods for determining the vapor pressures of semi-volatile organic compounds (SVOCs). Vapor pressures for octachlorodibenzo-p-dioxin (OCDD) and octachlorodibenzofuran (OCDF) were in excellent agreement with those reported in literature. The application of the current method for the vapor pressure determinations of eight polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs) in the extended temperature range (up to 275 °C) is reported. The extension of the vapor pressures to such temperatures, unprecedented for the PCDDs/Fs, is important for vapor-particle partitioning modeling in regions relevant to PCDD/F formation and control. Estimates for the melting temperatures and enthalpies of sublimation and vaporization are also reported, the latter for which no experimentally determined values have been found in the literature. The use of the method to deliver reproducible, trace concentrations (ppt-ppb) of targets was applied to the calibration of the jet-REMPI/TOFMS as an online detector for low chlorinated PCDDs/Fs.     

改进蚁群算法求解两地间时间最优路径

为提高蚁群算法的运算效率,提出一种改进的蚁群算法来求解问题。研究中中引入阀值排序算法对搜索路径进行优化,解决了蚁群算法前期搜索路径的盲目性问题。改进的蚁群算法加快了收敛速度,并提高了稳定性。经仿真试验证明,改进蚁群算法性在减少算法的迭代次数和提高解的稳定性方面有了较大的提高,并且能很好的用于求解路径时间最优问题。     

An efficient hybrid multicast transport protocol for collaborative virtual environment with networked haptic

In recent years, we have witnessed a growing interest in the synchronous collaboration based class of applications. Several techniques for collaborative virtual environments (CVE), haptic, audio and visual environments (C-HAVE) have been designed. However, several challenging issues remain to be resolved before CVE and C-HAVE become a common place. In this paper, we focus on applications that are based on closely coupled and highly synchronized haptic tasks that require a high-level of coordination among the participants. Four main protocols have been designed to resolve the synchronization issues in such environments: the synchronous collaboration transport protocol, the selective reliable transmission protocol, the reliable multicast transport protocol and the scalable reliable multicast. While these four protocols have shown good performance for CVE and C-HAVE class of applications, none of these protocols has been able to meet all of the basic CVE requirements, i.e., scalability, reliability, synchronization, and minimum delay. In this paper, we present a hybrid protocol that is able to satisfy all of the CVE and C-HAVE requirements and discuss its implementation and results in two tele-surgery applications. This work is partially supported by Grants from Canada Research Chair Program, NSERC, OIT/Ontario Distinguished Researcher Award, Early Research Award and ORNEC Research Grant.     

KSUTraffic: A Microscopic Traffic Simulator for Traffic Planning in Smart Cities

Simulation is a powerful tool for improving, evaluating and analyzing the performance of new and existing systems. Traffic simulators provide tools for studying transportation systems in smart cities as they describe the evolution of traffic to the highest level of detail. There are many types of traffic simulators that allow simulating traffic in modern cities. The most popular traffic simulation approach is the microscopic traffic simulation because of its ability to model traffic in a realistic manner. In many cities of Saudi Arabia, traffic management represents a major challenge as a result of expansion in traffic demands and increasing number of incidents. Unfortunately, employing simulation to provide effective traffic management for local scenarios in Saudi Arabia is limited to a number of commercial products in both public and private sectors. Commercial simulators are usually expensive, closed source and inflexible as they allow limited functionalities. In this project, we developed a local traffic simulator “KSUtraffic” for traffic modeling, planning and analysis with respect to different traffic control strategies and considerations. We modeled information specified by GIS and real traffic data. Furthermore, we designed experiments that manipulate simulation parameters and the underlying area. KSUTraffic visualizes traffic and provides statistical results on the simulated traffic which would help to improve traffic management and efficiency.     

The Investigation of the Fractional-View Dynamics of Helmholtz Equations Within Caputo Operator

It is eminent that partial differential equations are extensively meaningful in physics, mathematics and engineering. Natural phenomena are formulated with partial differential equations and are solved analytically or numerically to interrogate the system’s dynamical behavior. In the present research, mathematical modeling is extended and the modeling solutions Helmholtz equations are discussed in the fractional view of derivatives. First, the Helmholtz equations are presented in Caputo’s fractional derivative. Then Natural transformation, along with the decomposition method, is used to attain the series form solutions of the suggested problems. For justification of the proposed technique, it is applied to several numerical examples. The graphical representation of the solutions shows that the suggested technique is an accurate and effective technique with a high convergence rate than other methods. The less calculation and higher rate of convergence have confirmed the present technique’s reliability and applicability to solve partial differential equations and their systems in a fractional framework.     

Synthesis,structure and optical properties of x(CuO)/(1−x)Ni(OH)2 [x=0, 0.1 and 0.3] nanocomposites

The x(CuO)/(1−x)Ni(OH)₂ [x=0, 0.1 and 0.3] nanocomposites were prepared by the hydrothermal method in the presence of the surfactant polyethylenglycol-10000 (PEG-10000). X-ray diffraction (XRD), infrared (IR) spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to characterize the as-prepared samples. The increase of the CuO content led to the increase of the crystallite size of both, the β-Ni(OH)₂ and the CuO. The increase in the crystallite size greatly affects the band gap energy of the as-prepared nanocomposites. The band gap energies of the x(CuO)/(1−x)Ni(OH)₂ nanocomposites were estimated by UV–vis spectroscopic method. UV–vis spectroscopic results showed an apparent decrease in the direct band gap energies. The x(CuO)/(1−x)Ni(OH)₂ [x=0, 0.1 and 0.3] nanocomposites show low band gap energies compared to the Ni(OH)₂ bulk materials. The enhanced optical properties lead to their possible use in photocatalytic and photovoltaic applications.     

Mechanistic relationships among PCDDs/Fs, PCNs, PAHs, CIPhs, and CIBzs in municipal waste incineration

An extensive investigation was conducted to understand polychlorinated dibenzo-p-dioxin and furan (PCDD/F) formation mechanisms and their relationship with other organic compounds. PCDD/F, chlorophenols (CIPhs), chlorobenzenes (CIBzs), polyaromatic hydrocarbons (PAHs), and polychlorinated naphthalenes (PCNs) were analyzed in the boiler exit gases of a field-scale municipal solid waste incinerator under various operating conditions. The TEQ value and the concentration of target compounds changed with incinerator operating conditions. Low mass PAHs and 246-triCIPh increased dramatically during shut downs; the latter was associated with increased 1368- and 1379-TeCDD. A strong correlation was observed between PCNs and PCDFs and adjacent PCNs homologue group were closely related to each other. This suggested that PCN formation is related with chlorination/dechlorination mechanisms similar to PCDFs. PCDDs were related with most of the CIPhs and the high chlorinated benzenes. Most of target compounds except PAHs had a positive correlation (R2 > 0.5) with TEQ and half of them showed a good relationship (R2 > 0.8) with PCDDs/Fs toxic equivalency (TEQ).