Extensions of polyacrylic acid ammonium salts in the adsorption layer to fluidize alumina slurries

An average shell volume occupied in the adsorption layer on alumina by a polyacrylic acid ammonium salts molecule (PAA) defined as the average area occupied by an adsorbed PAA on alumina multiplied by the average thickness of the water layer at the limit of thickening, has been calculated from the adsorbed amount of PAA and from the flow points of alumina in the presence of PAA of different molecular weights. A steric effect of the PAA dispersant on the dispersion of alumina resulted in a flow with no yield stress. This was due to the change of the extension of PAA in the adsorption shell from a sphere to an ellipsoid with a long axis which exceeded the effective distance that the van der Waals attraction force reaches at a molecular weight for the PAA of between 10 000–20 000.     

Osteoclastic features of multinucleated giant cells responding to synthetic hydroxyapatite implanted in rat jaw bone.

Multinucleated giant cells (MGCs) that responded to synthetic hydroxyapatite (HAP) implanted in rat mandibles were studied with electron microscopy. HAP used in this study sintered at 200 degrees C (HAP200) and at 125 degrees C (HAP1250) after the synthesis by a wet method. One to three weeks after the intraosseous implantation of HAP, MGCs responding to HAP200 had not only well-developed ruffled border and the clear zone but well-developed perinuclear Golgi complex, many mitochondria and vesicles in their cytoplasms. MGCs responding to HAP1250 had the clear zone, but not the ruffled border although they showed similar cytoplasmic features to those of MGCs responding to HAP200. They merely extended short slender cytoplasmic processes to HAP1250. These results suggest that although osteoclast-like MGCs respond to HAP implanted in the bone, the development of the ruffled border-clear zone system depends on physicochemical properties of HAP.     

Surface Hardening of Carbon Steel Using High Powered YAG Laser

A high powered YAG laser with kaleidoscope for surface modification was applied to the surface hardening of carbon steels containing 0. 18-0.54 wt% C without the absorbents, and the relationships between laser processing and surface hardening were investigated by hardness and microstructure. The structure of the hardened zone underwent complete martensitic transformation in all of the carbon steels tested, and its hardness increased with greater carbon content. Under identical irradiated conditions, the hardened zone expanded with increasing carbon content. A hardened zone extending from the surface to a depth of 1.0 mm was obtained at a laser power of 1.0 kW and a scanning speed of 1 mm/sec. It was found that in the surface hardening of carbon steels, a high powered YAG laser can be used to control the hardened zone by selecting the appropriate irradiation conditions, however, the hardened zone was affected by the assistant gas and the flow rate.     

Training techniques for neural network applications in ATM

The main problems of adaptive ATM quality of service (QoS) control methods using neural networks were the exponentially wide range of the output target and the real-time training data sampling. But new practical techniques to overcome these problems may open new neural network applications. In this article, the framework of connection admission control (CAC) is described as a typical example of neural-network-based QoS estimation and two practical techniques, called relative target method and virtual output buffer method, are presented to enhance the neural network performance in CAC     

Dispersion of ZrO2 particles in aqueous suspensions by ammonium polyacrylate

The effects of poly anionic-electrolyte (ammonium polyacrylate, PAA) as a dispersant on two kinds of ZrO₂ (monoclinic and yttria-doped tetragonal zirconia) aqueous suspensions were examined by the measurements of-potential and viscosity, the sedimentation test and the determination of the wet point and flow point of the powders. Additions above 2.5 wt% PAA to zirconia gave a negative high-potential above –30 mV, and then –45 and –30 mV were obtained for monoclinic and tetragonal zirconia above 5 wt% PAA, respectively. A high negative-potential above –30 mV was retained with 5 wt% PAA for a change in pH over a wider range (pH 6 to 10 for monoclinic ZrO₂, 7 to 9 for tetragonal ZrO₂) in comparison to that of ZrO₂ without dispersant. The increase of the-potential resulted in a decrease in the viscosity. The evaluation of dispersion by the sedimentation test was correlated well with the value of-potential and the viscosity of the suspensions. The presence of native positive charge of monoclinic and tetragonal zirconia powders required an excess amount of PAA to attain dispersion of the suspension. There was a small difference in the least amount of PAA required to attain good dispersion between monoclinic and tetragonal ZrO₂. The difference was also indicated by changes of the flow point on PAA addition. Addition of 0.1% PAA to monoclinic ZrO₂ and 0.25 wt% to tetragonal ZrO₂ gave a maximum value of the flow point, whereas the positive-potential fell to zero. Measurement of the flow point was a simple and useful technique for rapid evaluation of a required amount of dispersant for ZrO₂ suspensions.     

Net shape formation of sub-micron alumina with reduced flaws by high-speed centrifugal compaction process

A new compacting method for powder materials is presented. High-Speed Centrifugal Compaction Process (HCP) utilizes centrifugal force of about 10,000 g for the compaction. HCP is suitable for net shape compaction of fine sub-micron and nano-powders. HCP possesses a unique compacting mechanism that is different from other colloidal processes including Pressure Casting (PC), and has a number of useful characteristics. HCP has a higher compacting speed than PC, wide applicability for net shape formation, as well as a defect removing function. Because of homogeneous and flawless green microstructure, HCP alumina shows superior sinterability and higher strength and hardness than most of other aluminas. This article is based on a presentation made in the symposium “The 3rd KIM-JIM Joint Symposium on Advanced Powder Materials“, held at Korea University, Seoul, Korea, October 26–27, 2001 under auspices of The Korean Institute of Metals and Materials and The Japan Institute of Metals.     

The Effect of Lanthanum on the Scales Developed on Thin Foils of Fe-20Cr-5Al at Very High Temperatures

A study has been undertaken of the effects oflanthanum on the oxidation of thin foils of Fe-20Cr-5Alin air at 1150°C. The addition of lanthanum causesthe time to breakaway to increase from about 24 hr for Fe-20Cr-5Al to over 400 hr. Oxidationof the lanthanum-containing alloy occurs in threestages. During the first stage, an-Al₂O₃ layer is establishedand thickens with time until the aluminum in the foil is depleted sufficiently for alayer of Cr₂O₃ to become stableand develop at the scale-alloy interface. This continuesto thicken at a relatively slow rate until breakawayoccurs. The main emphasis in the present paper has been anexamination and analysis of the scale established on thelanthanum-containing alloy in cross section in theanalytical transmission electron microscope (TEM), after an exposure period that coincides with thesecond stage of oxidation, prior to breakaway. The scaleat that time consists of three layers. The outer layeris composed of equiaxed Al₂O₃grains. The intermediate and inner layers consist of columnarAl₂O₃ grains and equiaxedCr₂O₃ grains, respectively.Numerous voids are observed in the oxide grainboundaries and at the intermediate-inner layerinterface. Lanthanum segregates in the oxide grain boundaries andits concentration increases toward the outermost surfaceof the scales. These results are consistent with thedynamic segregation model to account for the effects of reactive elements on thegrowth of Al₂O₃ scales.     

New Preparation Method of CdS Clusters Encapsulated in Y-Type Zeolites

CdS clusters encapsulated in Y-type zeolite were prepared by a novel technique with non-aqueous systems. The mechanical mixture of CdCl₂· 2.5H₂O crystal with Y-type zeolite was heated at 773 K, followed by the H₂S treatment at 373 K, resulting in the formation of CdS clusters with the size <2.3 nm.     

Lysozyme requires fluctuation of the active site for the manifestation of activity

Mutations around His15 which lie far away from the active site,stimulated glycol chitin activity of lysozyme at physiologicaltemperature. Del-Argl4Hisl5 lysozyme, a mutant lysozyme whoseArgl4 and Hisl5 were deleted together, and has the highest activityamong these mutant lysozymes, had a similar binding abilityto a trimer of N-acetyl-glucosamine, a substrate analogue, relativeto native lysozyme. This suggests that the increased activitywas due to an increased k_cat in the catalysis reaction. TheH-D exchange rate of the N-1 proton in the Trp63 which is locatedin the active site cleft, was enhanced in the Del-Argl4Hisl5lysozyme, while 2-D proton NMR analysis revealed no conformationalchange around Trp63. We conclude that some sort of fluctuationat the active site might be required for the manifestation ofactivity. This theory is supported by the finding that the Del-Argl4Hisl5lysozyme showed a shift in temperature dependency of activityto lower temperatures compared with that of native lysozyme.     

Effective renaturation of reduced lysozyme by gentle removal of urea

To increase the folding yield of concentrated reduced lysozyme,we developed a renaturation method by means of dialysis fromconcentrated urea with redox agents. After lysozyme was incubatedin the reducing buffer (8 M urea solution) with oxidized glutathione,renaturation of reduced lysozyme was started by dialysis againstthe dialyzing buffer containing 8 M urea with redox agents.The urea concentration of the dialyzing bottle was graduallydiluted with dialyzing buffer without urea at a flow rate of0.1 ml/min by high pressure pump. Using this systematic dialysis,a concentration as high as 5 mg/ml of reduced lysozyme couldbe renaturated in 80% yield, while the folding yield was <5%even at a concentration of 1 mg/ml using a conventional rapiddilution method [Goldberg et al. (1991) Biochemistry, 30, 2790–2797].Therefore, it was concluded that gentle removal of urea fromdenatured proteins, dissolved in concentrated urea solution,by means of dialysis should be useful to renature denaturedproteins effectively.