Application of microwaves and millimeter waves for thecharacterization of teeth for dental diagnosis and treatment

This paper presents applications of microwaves and millimeter waves for the characterization of teeth. This is done by measuring the complex permittivity over the frequency range from 0.04 to 40 GHz. These measurements have revealed that dental caries are significantly more lossy to microwaves and millimeter waves than the healthy tooth, and this difference can be used for dental diagnosis. The experimental results have been confirmed by using the finite-difference time-domain (FDTD) method. In addition, millimeter-wave heating of the lossy dental caries can be used as a sterilization treatment. It is concluded that millimeter waves can be used for dental medical diagnosis as well as dental medical treatment     

Prognostic factors in radiation-treated esophageal carcinoma

Prognostic factors in esophageal carcinoma treated with irradiation were examined. The prognosis of 111 patients without metastasis who had received more than 60 Gy was analyzed. Significant associations were found between survival rates and tumor length, stage, radioresponse of the primary tumor and the s.c. X-P classification based on barium contrast radiography; superficial type (tumor limited to the surface of the esophageal wall), tumorous type (solid mass without ulceration), Ul-A type (tumor with shallow ulceration with regular margin), Ul-B type (tumor with deep ulceration or irregular ulcer margin), and funneled type (tumor invading the esophageal wall in a scirrhous pattern). In multiple regression analysis, the X-P classification had the strongest correlation with survival and the survival rates of patients with the superficial type, the tumorous type and the s.c. Ul-A type were significantly higher than those of patients with the other tumor types (p < 0.001).     

MR cholangiopancreatography with single-shot fast-spin-echo sequences]

Imaging quality of MR cholangiopancreatography (MRCP) has recently made a great advance, and MRCP plays an important part in the diagnosis of pancreticobiliary diseases. To obtaining excellent-quality MRCP images, three conditions are required: fluid-to-background contrast, high spatial resolution, and suppression of respiratory motion artifacts. Respiratory motion artifacts, whose suppression is especially important for MRCP, can be controlled by the use of breath-holding, signal averaging, or respiratory triggering. These images are implemented in either single-slice technique or multi-slice technique. We have performed MRCP prior to endoscopic retrograde cholangiopancreatography (ERCP) in more than 100 patients. MRCP images were obtained as maximum-intensity-projection (MIP) reconstruction images and thick-slice projection images by using single-shot fast-spin-echo sequence, and MIP reconstruction images by using respiratory-triggered fast-spin-echo sequence. We reviewed MRCP imaging with single-shot fast-spin-echo sequences.     

Microdosimetry of neutron field for boron neutron capture therapy at Kyoto university reactor

Microdosimetric single event spectrum in a human body simulated by an acrylic phantom has been measured for the clinical BNCT field at the Kyoto University Reactor (KUR). The recoil particles resulting from the initial reaction and subsequent interactions, namely protons, electrons, alpha particles and carbon nuclei are identified in the microdosimetric spectrum. The relative contributions to the neutron dose from proton, alpha particles and carbon are estimated to be about 0.9, 0.07 and 0.3, respectively, four depths between 5 and 41 mm. We estimate that the dose averaged lineal energy, yD decreased with depth from 64 to 46 keV microm(-1). Relative biological effectiveness (RBE) of this neutron field using a response function for the microdosimetric spectrum was estimated to decrease from 3.6 to 2.9 with increasing depth.     

Improvement of flatness error in milling plate-shaped workpiece by application of side-clamping force

To improve flatness error of plate-shaped workpieces in milling under side clamp holding mechanisms, appropriate magnitudes of clamping forces and method of application are studied in this paper. The effect of side-clamping force on workpiece deformation is investigated by experimental and computational analyses for the case where the workpiece is clamped at a position higher than the neutral plane of bending of the plate-shaped workpiece. It is found that the thermal deformation and elastic deformation caused by clamping force are in two opposite directions. Then, an appropriate method is proposed to compensate for the workpiece thermal deformation caused by cutting heat with the opposite elastic deformation caused by the side-clamping force, so as to keep the machined top surface of the workpiece flat as much as possible. The proposed method has been confirmed through computational analyses and experiments. © 2000 Elsevier Science Inc. All rights reserved.     

A Microprocessor for Speech Recognition

A new single-chip microprocessor for speech recognition, the SRP, has been developed, utilizing a multiprocessor architecture and a pipelined structure. It can recognize up to 340 isolated words or 40 connected words in real time. The SRP contains a vector distance calculator, a DP-equation calculator, and an I/O controller operating in a pipelined manner. Algorithm variations and operation parameters are user programmable, and the total size of the SRP program for a typical speech recognition system is about 700 words. The device has been fabricated with n-channel Si-gate E/D MOS technology with 2.5 μm design rules and employs 7296 three-transistor dynamic RAM cells for a total of more than 40 000 transistors.     

Control schemes for auxiliary switches of three‐phase PWM resonant snubber inverters

Control schemes for auxiliary switches of PWM controlled three‐phase resonant snubber inverters (RSIs) are proposed. The control schemes proposed in this paper are based on a conventional PWM technique. To avoid zero voltage switching lost conditions, the conventional PWM technique is modified in the proposed schemes. The proposed control schemes are so simple that they are suitable for digital control. In this paper, a CPLD (Complex Programmable Logic Device)‐based control IC, which realizes the proposed control schemes, for three‐phase auxiliary RSIs is also proposed and implemented. The IC generates gate signals for the main and auxiliary devices of the three‐phase RSI based on the proposed control schemes. The effectiveness of the proposed control schemes was verified through experiments. As a result, ZVS (Zero Voltage Switching) turn‐on at the main devices was achieved and a smooth sinusoidal output current was obtained by use of the control IC. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 152(4): 57–67, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20125     

Effect of surface roughness and surface modification of indium tin oxide electrode on its potential response to tryptophan

The effect of surface modification of indium tin oxide (ITO) electrode on its potential response to tryptophan was investigated for ITO substrates with different surface roughness. It was found that a small difference in surface roughness, between ∼1 and ∼2 nm of R_a evaluated by atomic force microscopy, affects the rest potential of ITO electrode in the electrolyte. A slight difference in In:Sn ratio at the near surface of the ITO substrates, measured by angle-resolved X-ray photoelectron spectrometry and Auger electron spectroscopy is remarkable, and considered to relate with surface roughness. Interestingly, successive modification of the ITO surface with aminopropylsilane and disuccinimidyl suberate, of which essentiality to the potential response to indole compounds we previously reported, improved the stability of the rest potential and enabled the electrodes to respond to tryptophan in case of specimens with R_a values ranging between ∼2 and ∼3 nm but not for those with R_a of ∼1 nm. It was suggested that there are optimum values of effective work function of ITO for specific potential response to tryptophan, which can be obtained by the successive modification of ITO surface.     

Fluctuations in the cerebral oxygenation state during the resting period in functional mapping studies of the human brain

Functional mapping studies using near-infrared spectroscopy have detected for the first time the existence of significant fluctuations in the concentration of cerebral oxygenated [oxy-Hb], and deoxygenated haemoglobin, [deoxy-Hb], during the resting period. The fluctuations are not related to alterations in the systemic circulatory system. The temporal pattern varies with each brain region. In some instances, the degrees of change in [oxy-Hb] and [deoxy-Hb] caused by highly integrated tasks are within this resting variation range. Thus, taking account of these fluctuations is essential to the interpretation of distribution patterns of cerebral activity.