WO3 nano-ribbons: their phase transformation from tungstite (WO3·H2O) to tungsten oxide (WO3)

Tungsten oxide (WO₃) nano-ribbons (NRs) were obtained by annealing tungstite (WO₃·H₂O) NRs. The latter was synthesized below room temperature using a simple, environmentally benign, and low cost aging treatment of precursors made by adding hydrochloric acid to diluted sodium tungstate solutions (Na₂WO₄·2H₂O). WO₃ generates significant interests and is being used in a growing variety of applications. It is therefore important to identify suitable methods of production and better understand its properties. The phase transformation was observed to be initiated between 200 and 300 ^°C, and the crystallographic structure of the NRs changed from orthorhombic WO₃·H₂O to monoclinic WO₃. It was rigorously studied by annealing a series of samples ex situ in ambient air up to 800 ^°C and characterizing them afterward. A temperature-dependent Raman spectroscopy study was performed on tungstite NRs between minus 180 and 700 ^°C. Also, in situ heating experiments in the transmission electron microscope allowed for the direct observation of the phase transformation. Powder X-ray diffraction, electron diffraction, electron energy-loss spectroscopy, and X-ray photoelectron spectroscopy were employed to characterize precisely this transformation.     

Calculation of the dietary exposure of Chinese consumers to acephate residues using deterministic and probabilistic approaches

This paper compares the exposure for the Chinese populations and sub-groups to acephate, a widely applied organophosphorus pesticide, using deterministic and probabilistic approaches. Acephate residue data were obtained from the national food contamination monitoring program 2001-2006, collected by multi-stage stratified sampling and with a detection rate of 3.3%. Food consumption data were gathered from the national diet and nutrition survey conducted in 2002 over three consecutive days by the 24-h recall method, and included 22,563 families or 65,886 consumers aged 2-100 years. For point estimate, it was evident that exposures were higher than the acute reference dose (ARfD) in many cases. For the probabilistic approach, the P99.9 exposures for the general population and children accounted for 11.88 and 24.15% of the ARfD, respectively, in acute intake calculations and 52.86 and 68.75%, respectively, of the acceptable daily intake (ADI) in chronic intake calculations. The exposure level of rural people was higher than urban dwellers, and vegetables contributed most to acephate intake.     

Exposure assessment of the Belgian population to pesticide residues through fruit and vegetable consumption

Exposure of the Belgian consumer to pesticide residues from the consumption of fruit and vegetables was determined based on data collected in the Belgian food consumption survey performed by the Scientific Institute for Public Health and data from the Belgian Federal Agency for the Safety of the Food Chain 2005 monitoring programme. A first screening of pesticide residue exposure was performed by a deterministic approach. For most pesticide residues studied, the exposure was 100 times lower than the acceptable daily intake (ADI). However, for a high consumer (97.5th percentile of consumption) the intake could reach 23% of the ADI for imazalil, 15% for chlorpropham, 14% for the dithiocarbamates, 10% for dimethoate and lambda-cyhalothrin, and 9% for chlorpyriphos. Nevertheless, probabilistic exposure assessment performed on these pesticides in a second phase of the study indicated that, except for chlorpropham, the probability to exceed the ADI is much lower than 0.1%.     

Calibration and testing of a TLD dosemeter for area monitoring

The response of a TLD-600/TLD-700 area dosemeter has been characterized in neutron fields around the 590 MeV cyclotron ring at the Paul Scherrer Institute (PSI). The dosemeter is based on a cylindrical paraffin moderator with three of each type of TLD chip at the centre, and is intended to use for area monitoring around accelerator facilities. The dosemeter is calibrated in terms of ambient dose equivalent using a non-moderated 252Cf neutron source. The ambient dose equivalent response has been tested in five locations where the neutron fields and dose rates have been well characterized by Bonner sphere spectrometer and active neutron monitor measurements. The different spectrum shapes and dose rates in the five locations permit the comparison of the behavior of the active and passive dosemeters in these neutron fields.     

A computational tool based on voxel geometry for dose reconstruction of a radiological accident due to external exposure

In the case of overexposure to ionising radiation, estimation of the absorbed dose in the organism is an important indicator for evaluating the biological consequences of this exposure. The physical dosimetry approach is based either on real reconstruction of the accident, using physical phantoms, or on calculation techniques. Tools using Monte Carlo simulations associated with geometric models are very powerful since they offer the possibility to simulate faithfully the victim and the environment for dose calculations in various accidental situations. Their work presents a new computational tool, called SESAME, dedicated to dose reconstruction of radiological accidents based on anthropomorphic voxel phantoms built from real medical images of the victim in association with the MCNP Monte Carlo code. The utility was, as a first step, validated for neutrons by experimental means using a physical tissue-equivalent phantom.     

Exposure of aircraft crew to cosmic radiation: on-board intercomparison of various dosemeters

Owing to their professional activity, flight crews may receive a dose of some millisieverts within a year; airline passengers may also be concerned. The effective dose is to be estimated using various experimental and calculation tools. The European project DOSMAX (Dosimetry of Aircrew Exposure during Solar Maximum) was initiated in 2000 extending to 2004 to complete studies over the current solar cycle during the solar maximum phase. To compare various dosemeters in real conditions simultaneously in the same radiation field, an intercomparison was organised aboard a Paris-Tokyo round-trip flight. Both passive and active detectors were used. Good agreement was observed for instruments determining the different components of the radiation field; the mean ambient dose equivalent for the round trip was 129 +/- 10 microSv. The agreement of values obtained for the total dose obtained by measurements and by calculations is very satisfying.     

Micromixers to produce cosmetic emulsions

In the cosmetics industry, emulsions play a key-role in active solubilization and texture/efficacy optimization. However, depending on their physico-chemical properties, the active ingredients are often more stable in a single phase: for example, Vitamin A is more stable in an oily phase than in a water phase. We have developed a special mixing device which produces an emulsion in the body of the pump, immediately before application on the skin. The mixing unit consists of two silicon chips. Each chip has several Y-shaped microchannels and intersections etched on its upper surface. When the two etched surfaces are bonded together, they produce series of interconnecting micromixing elements which permit the repeat mixing of the two phases, thus producing an extremely homogenous emulsion. These micromixers require carefully designed formulae in which the physico-chemical properties of each raw material are essential to obtain a spontaneous emulsion. This device has been incorporated into a spray pack and optimized to deliver the spontaneous emulsion when finger pressure is applied.