Experimental investigation on similarity between velocity and density profiles in density-stratified countercurrent flow in reactor horizontal leg

A density-stratified countercurrent flow was investigated to obtain data necessary to develop a physical model on a thermally stratified flow in a horizontal leg of a pressurized water reactor (PWR). The experiments were conducted at atmospheric pressure and temperature using fresh water and NaCl solution with a non-dimensional density ratio of up to 1.2. The emphasis was placed on measurements of velocity and concentration profiles near the interface between the two fluid layers. Measured mean velocity and concentration profiles were fitted consistently using the Monin–Obukhov similarity theory, which are well-known outcomes for stratified turbulent shear flow. The interfacial friction and entrainment coefficients obtained from the fitted profiles agreed well with existing results in literature, confirming the applicability of the Monin–Obukhov theory. Furthermore, a new empirical correlation was proposed for the prediction of a mixing layer thickness.     

Monte Carlo simulation of diffusive-to-ballistic transition in phonon transport

Heat conduction properties in Si nanostructures are analyzed using a Monte Carlo method developed for solving the phonon Boltzmann transport equation. The thermal resistances are evaluated for the systems with various sizes, and the transition from the diffusive to the ballistic heat conduction are investigated. We compare the two different phonon dispersion models (the realistic dispersion relation based on the adiabatic bond charge model and the analytically approximated model), and it is shown that the correct implementation of the phonon dispersion relation is essential to accurately simulate the quasi-ballistic heat conduction properties, which becomes obvious in the structures smaller than the phonon mean free path.     

Induction of abundant osteoclast-like multinucleated giant cells in adjuvant arthritic rats with accompanying disordered high bone turnover

The development of an in vivo system for investigating osteoclast differentiation is important because molecular events occurring in vivo can be observed during the differentiation of the authentic osteoclasts. In adjuvant arthritic rats, an experimental model of human rheumatoid arthritis, extensive bone resorption is observed in the distal diaphysis of the tibia. In the area of extensive bone resorption, it is always accompanied with clusters of numerous multinucleated giant cells (MGCs) as well as bone-resorbing osteoclasts. Here we characterized the morphological properties of these MGCs with the use of enzymehistochemical and immunohistochemical techniques. Extensive destruction but also a marked formation of the inner and outer bone surfaces were the predominant features in the tibiae of such arthritic rats 4 weeks after the adjuvant injection. Numerous MGCs were frequently clustered in the bone marrow spaces located apart from the bone matrices. Although the MGCs lacked ruffled borders, these cells were rich in mitochondria and vacuoles. These multinucleated cells revealed a positive reaction for tartrate-resistant acid phosphatase but a negative reaction for non-specific esterase staining. Most of these MGCs expressed the Kat 1-antigen, an immunological marker specifically expressed on the cell surface of rat osteoclasts. In a dentin resorption experiment using a cluster of MGCs excised from the bone marrow tissues of the tibial distal diaphyses of rats with adjuvant arthritis, many resorption lacunae were formed on dentin slices after a 3-day culture. These results suggest that the majority of the MGCs are osteoclasts but not macrophage polykaryons.     

Critical heat flux and heat transfer above mixture level under high-pressure boil-off conditions in PWR type and tight-lattice type fuel bundles

Heat transfer tests were conducted in PWR 17 × 17 type and tight-lattice type fuel bundles under high-pressure boil-off (very-low flow, mass fluxes lower than 100 kg/m²s) conditions. There is almost no significant difference in both critical heat flux (CHF) (or dryout point) data and convective heat transfer data above the mixture level between the PWR type and tight-lattice type bundles. The “complete vaporization equation” predicts well the CHF data, i.e. the dryout occurs nearly at the elevation where the thermal-equilibrium quality reaches 1.0. The Groeneveld CHF table used in the RELAP5/MOD3 code should be improved in the region of mass flux between 10 and 100 kg/m²s. The radiative heat transfer has an important contribution to total heat transfer above the mixture level. The Dittus-Boelter correlation, with use of the film temperature in evaluating steam properties, predicts well the convective heat transfer above the mixture level.     

Simultaneous measurement of liquid velocity and interface profiles of horizontal duct wavy flow by ultrasonic velocity profile meter

A simultaneous measurement of the liquid velocity and interface profiles was performed for stratified-smooth and wavy flows in a horizontal duct using a ultrasonic velocity profile (UVP) meter. The influences of the reflections of ultrasonic pulses at the gas–liquid interface and channel bottom were reduced by using an absorbent for the ultrasonic pulses on the duct bottom wall and optimization of the liquid level and time interval between pulses. For a smooth–stratified flow, good comparison was obtained with a velocity profile obtained by particle tracking velocimetry (PTV) for video pictures taken simultaneously at the UVP measurement. Polystyrene beads were used as the reflector and tracers respectively, for the UVP and PTV measurements. The velocity profiles measured for a wavy flow with periodically-generated interfacial waves agreed well with the theoretical prediction for solitary waves. Turbulence component appeared in the velocity profiles of both the smooth–stratified and wavy flows.     

Involvement of lymphocyte function-associated antigen-1 and intercellular adhesion molecule-1 in osteoclastogenesis: a possible role in direct interaction between osteoclast precursors

In our search for molecules involved in the process of osteoclast differentiation, we examined the surface phenotypes of the preosteoclast-like cells and osteoclast-like multinucleated cells (MNCs) formed in bone marrow cultures, using monoclonal antibodies recognizing different antigen molecules expressed on hematopoietic cells. Among these cell surface antigens, lymphocyte function-associated antigen-1 (LFA-1) and intercellular adhesion molecule-1 (ICAM-1) were highly expressed on mononuclear cells in the cultures for forming preosteoclast-like mononuclear cells. The double detection of these two antigen molecules with osteoclast-specific antigen and with calcitonin receptor, using a fluorescence-activated cell sorter or autoradiography technique, revealed that LFA-1 and ICAM-1 were expressed on the preosteoclasts. The expression of ICAM-1 was detected on both preosteoclasts and osteoclast-like MNCs, whereas the expression of LFA-1 was restricted to preosteoclasts. We designed a peptide with the sequence of the binding site of ICAM-1 against the ligand LFA-1. In the whole bone marrow culture system for forming osteoclast-like MNCs, a significant inhibition of MNC formation was observed by the addition of this peptide. These results strongly suggest the involvement of an LFA-1/ICAM-1-interaction in osteoclastogenesis.     

Electric double‐layer capacitor module with series‐parallel reconfigurable cell voltage equalizers

When electric double‐layer capacitors (EDLCs) are connected in series, a cell voltage imbalance occurs due to nonuniform cell properties. Cell voltage imbalance should be minimized to prolong cycle lives and maximize the available energy of cells. In this study, we propose a series‐parallel reconfigurable cell voltage equalizer that is considered suitable for energy storage systems using EDLCs instead of traditional secondary batteries as the main energy storage sources. The proposed equalizer requires only EDLCs and switches as its main circuit elements, and it utilizes EDLCs not only for energy storage but also for equalization. An equivalent circuit model using equivalent resistors that can be regarded as an index of equalization speed is developed. Current distribution and cell voltage imbalancing during operation are quantitatively generalized. Experimental charge–discharge tests were performed on the EDLC modules to demonstrate the performance of the cell voltage equalizer. All the cells in the modules could be charged/discharged uniformly even when a degradation‐mimicking cell was intentionally included in the module. The resultant cell voltage imbalances and current distributions were in good agreement with those predicted by mathematical analyses. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 181(4): 38–50, 2012; Published online in Wiley Online Library (wileyonlinelibrary.com). DOI 10.1002/eej.21287     

LOCA steam condensation loads in BWR Mark II pressure suppression containment system

Hydrodynamic loads induced in the BWR Mark II pressure suppression containment system during a loss-of-coolant accident (LOCA) were investigated using a large scale test facility. The maximum-bounding loading conditions on the pressure suppression pool-boundary structures were defined by conducting experiments for a wide range of parameters. The maximum-bounding loads occurred when steam, with air concentration less than 1% in weight, was injected at moderate rates ( 30 kg/m²·s) into a low-temperature (below 310 K) pool. Such conditions are most likely to be encountered during LOCAs with intermediate break sizes.     

The LOCA air-injection loads in BWR Mark II pressure suppression containment systems

Large-scale blowdown tests were conducted to investigate the thermal-hydrodynamic response of a boiling-water reactor (BWR) Mark II pressure suppression containment system to a postulated loss-of-coolant accident. This paper presents the test results on the early blowdown transients, where air in the drywell is injected into the pressure suppression pool and induces various hydrodynamic loads onto the containment pressure boundary and internal structures. The test data are compared to predictions by analytical models used for the licensing evaluation of the hydrodynamic loads to assess these models.