Dynamical Properties of Vortices in a Bose-Einstein Condensate in a Rotating Lattice

We present simulation results of the vortex dynamics in a trapped Bose-Einstein condensate in the presence of a rotating optical lattice. Changing the potential amplitude and the relative rotation frequency between the condensate and the optical lattice, we find a rich variety of dynamical phases of vortices. In particular, when the optical lattice rotates faster than the condensate, the competition between the pinning force and the interactions by nucleated interstitial vortices leads to the melting of vortex lattice, yielding a vortex liquid phase.     

Graphite formation on Ni film by chemical vapor deposition

Thin film formation of graphite by chemical vapor deposition using 2-methyl-1,2′-naphthyl ketone as a starting material was carried out on Ni film substrates. On Ni films directly deposited on quartz glass, the graphite films were obtained when the Ni film thickness was above 1 000 Å and above 5 000 Å at 700 °C and 1 000 °C, respectively. Depositions on thinner Ni film substrates comprise amorphous carbon (a-C) or graphite tubes which was owing to the thermal coagulation of the Ni film into droplets. On the other hand, graphite film was obtained on the Ni film with thickness 10 Å when a-C was inserted between the Ni film and the quartz glass. The coagulation of the Ni film is considered to be avoided by inserting a-C layer.     

Selective hydrogenation of oleic acid to 9-octadecen-1-ol: Catalyst preparation and optimum reaction conditions

A new catalyst, ruthenium-tin-alumina is found to selectively hydrogenate oleic acid to 9-octadecen-1-ol (oleyl + elaidyl alcohol) at low pressure with high yield. Catalyst preparation methods, catalyst raw materials and activation conditions have a significant effect on the activity of the catalyst. The optimum atomic ratio of ruthenium to tin is about 1:2. Catalyst prepared by an improved sol-gel method shows higher activity and selectivity than catalysts prepared by impregnation and coprecipitation methods. Chloride is found to have a negative effect on catalytic activity. The best catalyst is prepared from chloride-free ruthenium and tin raw materials. Under the optimum reaction conditions of 250°C and 5.6 MPa, the selectivities for 9-octadecen-1-ol and total alcohol (9-octadecen-1-ol + stearyl alcohol) formation are 80.9% and 97%, respectively, at a conversion of 81.3%.     

Interaction of two close quantized vortices in superfluid4He

The three-dimensional dynamics of two interacting quantized vortex filaments is studied. The equations of motion and the method of numerical calculation follow Schwarz. Whether two approaching filaments reconnect or not depends on their arrangement before approach. When a ring moves toward a line from a distance, only within a critical initial distance they can reconnect. The critical distance is minimized when their circulations are parallel at the closest place, while it increases as their circulations begin to deviate from being parallel. Hence the reconnection probability can be less than unity.     

Surface Hardening of Carbon Steel Using High Powered YAG Laser

A high powered YAG laser with kaleidoscope for surface modification was applied to the surface hardening of carbon steels containing 0. 18-0.54 wt% C without the absorbents, and the relationships between laser processing and surface hardening were investigated by hardness and microstructure. The structure of the hardened zone underwent complete martensitic transformation in all of the carbon steels tested, and its hardness increased with greater carbon content. Under identical irradiated conditions, the hardened zone expanded with increasing carbon content. A hardened zone extending from the surface to a depth of 1.0 mm was obtained at a laser power of 1.0 kW and a scanning speed of 1 mm/sec. It was found that in the surface hardening of carbon steels, a high powered YAG laser can be used to control the hardened zone by selecting the appropriate irradiation conditions, however, the hardened zone was affected by the assistant gas and the flow rate.     

AP的安全制备（英）

1 IntroductionThe ammonium perchlorate ( AP)-based compositepropellant is currently the most widely used one becausethis propellant has good burning characteristics and me-chanical properties. One of the few serious drawbacks ofthe AP-based propellant is that its products of combus-tion, which include HCl, chlorine, and chlorine oxides,cause atmospheric pollution. Increasing concern for aclean atmosphere in recent years has resulted in a com-pelling need for developing a chlorine-free,enviro…     

Collective Shape Oscillation and Domain Formation of Two-Component Bose–Einstein Condensates

In this paper, we describe two kinds of characteristic nonlinear dynamics in two-component Bose–Einstein condensates. For two overlapping components, we analyzed the collective modes and a variety of nonlinear mode couplings, which were then confirmed by numerical simulation of the time-dependent Gross–Pitaevskii equations. Next, we consider the nonlinear dynamics of two condensates after abruptly turning on the intercomponent coupling strength. For strong intercomponent interactions the out-of-phase density wave of the condensates became unstable, leading to mugtiple domain formation.     

Elimination of fictitious penetrating rays from PO and hybridization with AFIM

Physical optics (PO) is an approximation method for high‐frequency scattering and diffraction problems. But PO fields are inaccurate in the shadow region where the source is screened by the scatter. Two key factors of the error for PO are (i) edge diffraction coefficients and (ii) existence of fictitious penetrating rays. The correction with respect to the former has been extensively investigated by many authors using various ray techniques such as GTD, UTD, and UAT. On the other hand, the latter was identified recently by the authors. This paper proposes novel PO‐based calculation procedures termed PO‐AF and PTD‐AF, where PO and Aperture Field Integration Method (AFIM) are merged with the help of special elementary diffraction coefficients. These can uniformly cover the whole angular region and only the error factor (ii) is removed in PO‐AF while both (i) and (ii) are removed in PTD‐AF. The theoretical backgrounds of PO currents are discussed in terms of field equivalence theorem and visualization of EM waves. Next, new methods are proposed and their validity is numerically demonstrated for 2D scattering problems of a strip, a corner reflector, and a cylinder of circular arc. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(2): 1–10, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20037