The effect of rice bran on physicochemical,textural and glycaemic properties of ready-to-eat extruded corn snacks

In this work, corn extruded snack products were enriched with rice bran (RB) at 10% and 15%. A co-rotating twin-screw extruder was used with a feed moisture content of 16 g 100 g⁻¹, a screw speed of 240 r.p.m. and four heating sections of the barrel (100, 140, 150 and 150 °C). The impact of RB inclusion on nutritional profile, starch digestion, physicochemical and textural properties of snack products was evaluated. RB-enriched extrudates showed a lower specific volume and hardness and higher crispness than control. RB at 15% gave a water-holding capacity lower than control. Rheology of extrudate dispersions indicated an increase in elastic interactions and solid-like behaviour with RB supplementation. Differences in rheological properties resulted in attenuation of predictive glycaemic response for RB-enriched snacks.     

Sofosbuvir Selects for Drug-Resistant Amino Acid Variants in the Zika Virus RNA-Dependent RNA-Polymerase Complex In Vitro

The nucleotide analog sofosbuvir, licensed for the treatment of hepatitis C, recently revealed activity against the Zika virus (ZIKV) in vitro and in animal models. However, the ZIKV genetic barrier to sofosbuvir has not yet been characterized. In this study, in vitro selection experiments were performed in infected human hepatoma cell lines. Increasing drug pressure significantly delayed viral breakthrough (p = 0.029). A double mutant in the NS5 gene (V360L/V607I) emerged in 3 independent experiments at 40–80 µM sofosbuvir resulting in a 3.9 ± 0.9-fold half- maximal inhibitory concentration (IC₅₀) shift with respect to the wild type (WT) virus. A triple mutant (C269Y/V360L/V607I), detected in one experiment at 80 µM, conferred a 6.8-fold IC₅₀ shift with respect to the WT. Molecular dynamics simulations confirmed that the double mutant V360L/V607I impacts the binding mode of sofosbuvir, supporting its role in sofosbuvir resistance. Due to the distance from the catalytic site and to the lack of reliable structural data, the contribution of C269Y was not investigated in silico. By a combination of sequence analysis, phenotypic susceptibility testing, and molecular modeling, we characterized a double ZIKV NS5 mutant with decreased sofosbuvir susceptibility. These data add important information to the profile of sofosbuvir as a possible lead for anti-ZIKV drug development.     

Solid state reactions between SiC and Ir

Reactivity between SiC and Ir as a function of SiC-crystallinity was investigated by diffusion bonding technique under a vacuum and over the temperature range of 1200–1450 °C. As reaction products, various Ir-silicides and free unreacted-C were detected. Reactivity is strongly affected by the temperature and SiC-crystallinity involving a series of interactions, from “no reaction” to “massive exothermic reactions”. In particular, interfacial phenomena are more pronounced by the presence of defects and grain boundaries.Solid state reactions result in formation of fine C-precipitates rearranged in a quasi-periodic microstructure. On the contrary, clustering of highly ordered C-precipitates (C-graphitized) occurs after “massive reactions” take place.A relationship between the degree of graphitization (from 1 to multi-layers of graphene), temperature and SiC crystallinity was found by Raman spectroscopy. 2D-layering phenomenon is enhanced in polycrystalline SiC at high temperature.     

DILIGENT: integrating digital library and Grid technologies for a new Earth observation research infrastructure

This paper introduces DILIGENT, a digital library infrastructure built by integrating digital library and Grid technologies and resources. This infrastructure allows different communities to dynamically build specialised digital libraries capable to support the entire e-Science knowledge production and consumption life-cycle by using shared computing, storage, content, and application resources. The paper presents some of the main software services that implement the DILIGENT system. Moreover, it exemplifies the provided features by presenting how the DILIGENT infrastructure is being exploited in supporting the activity of user communities working in the Earth Science Environmental sector. This work is partially funded by the European Commission in the context of the DILIGENT project, under the 2nd call of FP6 IST priority.     

The AFLATOX® Project: Approaching the Development of New Generation,Natural-Based Compounds for the Containment of the Mycotoxigenic Phytopathogen Aspergillus flavus and Aflatoxin Contamination

The control of the fungal contamination on crops is considered a priority by the sanitary authorities of an increasing number of countries, and this is also due to the fact that the geographic areas interested in mycotoxin outbreaks are widening. Among the different pre- and post-harvest strategies that may be applied to prevent fungal and/or aflatoxin contamination, fungicides still play a prominent role; however, despite of countless efforts, to date the problem of food and feed contamination remains unsolved, since the essential factors that affect aflatoxins production are various and hardly to handle as a whole. In this scenario, the exploitation of bioactive natural sources to obtain new agents presenting novel mechanisms of action may represent a successful strategy to minimize, at the same time, aflatoxin contamination and the use of toxic pesticides. The Aflatox^® Project was aimed at the development of new-generation inhibitors of aflatoxigenic Aspergillus spp. proliferation and toxin production, through the modification of naturally occurring molecules: a panel of 177 compounds, belonging to the thiosemicarbazones class, have been synthesized and screened for their antifungal and anti-aflatoxigenic potential. The most effective compounds, selected as the best candidates as aflatoxin containment agents, were also evaluated in terms of cytotoxicity, genotoxicity and epi-genotoxicity to exclude potential harmful effect on the human health, the plants on which fungi grow and the whole ecosystem.     

Cold sintering of diatomaceous earth

Diatomite, a natural silicate-based sedimentary rock, was densified by cold sintering at room temperature and 150°C under various pressures (100, 200, and 300 MPa) and using different NaOH water solutions (0–3 M). The relative density of cold sintered diatomite can be as high as 90%, a condition that can be achieved by conventional firing only at 1200–1300°C. The cold sintered materials maintain the same mineralogical composition of the starting powder (quartz, glass, and illite) and are constituted by well-deformed and flattened grains oriented orthogonally to the applied pressure. Conversely, an evident phase evolution takes place upon conventional firing with the formation of cristobalite and mullite. The bending strength of cold sintered artifacts can exceed 40 MPa and increases to ≈80 MPa after post-annealing at 800°C, such mechanical strength is much larger than that of conventionally pressed samples sintered at 800°C, which is only ≈1 MPa.     

A vision towards Scientific Communication Infrastructures

The two pillars of the modern scientific communication are Data Centers and Research Digital Libraries (RDLs), whose technologies and admin staff support researchers at storing, curating, sharing, and discovering the data and the publications they produce. Being realized to maintain and give access to the results of complementary phases of the scientific research process, such systems are poorly integrated with one another and generally do not rely on the strengths of the other. Today, such a gap hampers achieving the objectives of the modern scientific communication, that is, publishing, interlinking, and discovery of all outcomes of the research process, from the experimental and observational datasets to the final paper. In this work, we envision that instrumental to bridge the gap is the construction of “Scientific Communication Infrastructures”. The main goal of these infrastructures is to facilitate interoperability between Data Centers and RDLs and to provide services that simplify the implementation of the large variety of modern scientific communication patterns.     

A bacterial colony growth algorithm for mobile robot localization

Achieving robot autonomy is a fundamental objective in Mobile Robotics. However in order to realize this goal, a robot must be aware of its location within an environment. Therefore, the localization problem (i.e.,the problem of determining robot pose relative to a map of its environment) must be addressed. This paper proposes a new biology-inspired approach to this problem. It takes advantage of models of species reproduction to provide a suitable framework for maintaining the multi-hypothesis. In addition, various strategies to track robot pose are proposed and investigated through statistical comparisons. The Bacterial Colony Growth Algorithm (BCGA) provides two different levels of modeling: a background level that carries on the multi-hypothesis and a foreground level that identifies the best hypotheses according to an exchangeable strategy. Experiments, carried out on the robot ATRV-Jr manufactured by iRobot, show the effectiveness of the proposed BCGA.

Design and control of an IPMC wormlike robot.

This paper presents an innovative wormlike robot controlled by cellular neural networks (CNNs) and made of an ionic polymer-metal composite (IPMC) self-actuated skeleton. The IPMC actuators, from which it is made of, are new materials that behave similarly to biological muscles. The idea that inspired the work is the possibility of using IPMCs to design autonomous moving structures. CNNs have already demonstrated their powerfulness as new structures for bio-inspired locomotion generation and control. The control scheme for the proposed IPMC moving structure is based on CNNs. The wormlike robot is totally made of IPMCs, and each actuator has to carry its own weight. All the actuators are connected together without using any other additional part, thereby constituting the robot structure itself. Worm locomotion is performed by bending the actuators sequentially from "tail" to "head," imitating the traveling wave observed in real-world undulatory locomotion. The activation signals are generated by a CNN. In the authors' opinion, the proposed strategy represents a promising solution in the field of autonomous and light structures that are capable of reconfiguring and moving in line with spatial-temporal dynamics generated by CNNs.     

Influence of participation, facilitator styles, and metacognitive reflection on knowledge building in online university courses

Understanding how to foster knowledge building in online and blended learning environments is a key for computer-supported collaborative learning research. Knowledge building is a deeply constructivist pedagogy and kind of inquiry learning focused on theory building. A strong indicator of engagement in knowledge building activity is the socio-cognitive dynamic of epistemic agency, in which students exercise a higher level of agency for setting forth their ideas and negotiating fit with those of others rather than relying on their teacher. The purpose of this paper is to investigate the influence of (a) levels of participation, (b) facilitator styles and (c) metacognitive reflection on knowledge building in two blended, post-secondary education contexts. A study of a total of 67 undergraduate students suggest that high levels of participation, a supportive facilitator style, and ample opportunities for metacognitive reflection on the students’ own participation strategies are most conducive for fostering epistemic agency for knowledge building. Implications of these results for research and instructional design of online courses are discussed.