Airborne scatterometers: investigating ocean backscatter under low and high-wind conditions

Attempting to understand and predict weather on a local and global basis has challenged both the scientific and engineering communities. One key parameter in understanding the weather is the ocean surface wind vector because of its role in the energy exchange at the air-sea surface. scatterometers, radars that measure the reflectivity of a target offer a tool with which to remotely monitor these winds from tower-, aircraft-, and satellite-based platforms. This paper introduces three current airborne scatterometer systems, and presents data collected by these instruments under low-, moderate-, and high-wind conditions. The paper focuses on airborne scatterometers because of their ability to resolve submesoscale variations in wind fields. Discrepancies between existing theory and the observations are noted and the concerns in measuring low-wind speeds discussed. Finally, the application of using this technology for estimating the surface-wind vector during a hurricane is demonstrated     

Management of nasopharyngeal and oropharyngeal stenosis in children

Nasopharyngeal stenosis and oropharyngeal stenosis are rare and challenging problems in the pediatric population. The most common etiology is currently the surgical trauma associated with adenotonsillectomy. Stenosis can vary from a thin band to a complete obstructing cicatrix. Presenting symptoms range from mild hyponasal speech to severe airway obstruction. We present a series of eight children with varying degrees of stenosis and associated symptoms. Choice of treatment varied with the severity of disease. In our series, successful interventions included triamcinolone acetonide injection, lysis of adhesions, rotational and advancement mucosal flaps, and jejunal free flap. Preoperative evaluation and individualized surgical repair are essential for successful treatment.     

Triggering GaAs lock-on switches with laser diode arrays

Progress toward the triggering of high-power photoconductive semiconductor switches (PCSSs) with laser diode arrays, is reported. An 850-W optical pulse from a laser diode array was used to trigger a 1.5-cm-long switch that delivered 8.5 MW to a 38.3-Ω load. Using 166-W arrays, it was possible to trigger a 2.5-mm-long switch delivering 1.2 MW with 600-ps rise-times at pulse repetition frequencies of 1 kHz. These 2.5-mm-long switches survived 10⁵ pulses at 1.0 MW levels. In single-pulse operation, up to 600 A was switched with laser diode arrays. The goal is to switch up to 5 kA in a single-shot mode and up to 100 MW repetitively at up to 10 kHz. At electric fields below 3 kV/cm GaAs switches are activated by creation of one electron-hole pair per photon. This linear mode demands high laser power and, after the light pulse, the carriers recombine in nanoseconds. At higher electric fields GaAs acts as a light-activated Zener diode. The laser light generates carriers as before, but the field induces gain such that the amount of light required to trigger the switch is reduced by a factor of up to 500. The gain continues until the field across the sample drops to a material-dependent lock-on field. The gain in the switch allows for the use of laser diodes     

Methods of measuring susceptibility of anaerobic bacteria to trovafloxacin, including quality control parameters

Three methods approved by the National Committee for Clinical Laboratory Standards for testing the susceptibility of anaerobic bacteria were used to evaluate the fluoroquinolone, trovafloxacin. The methods gave essentially comparable results with 126 anaerobes and with three quality control strains. A collaborative study defined the quality control range for trovafloxacin MICs. Trovafloxacin had good in vitro activity against the more common anaerobes (MIC 90 < = or 2.0 micrograms/ml).     

Complications of care in a pediatric intensive care unit: a prospective study

OBJECTIVES: (a) To examine the frequency, type, and severity of complications occurring in a pediatric intensive care unit; (b) to identify populations at risk; and (c) to study the impact of complications on morbidity and mortality. DESIGN: Prospective survey. SETTING: Pediatric intensive care unit (PICU) of a university-affiliated hospital. PATIENTS: 1035 consecutive admissions over an 18-month period. RESULTS: 115 complications occurred during 83 (8.0%) admissions, for 2.7 complications per 100 PICU-days; 48 (42%) complications were major, 45 (39%) moderate, and 22 (19%) minor. Sixty complications (52%) were ventilator-related, 14 were drug-related, 13 procedure-related, 24 infectious, and 22 involved invasive devices (18 vascular catheters). Human error was involved in 41 (36%) cases, 21 of which were major (18%). Treatments included reintubation < 24 h (28), intravenous antimicrobials (24), and invasive bedside procedures (14). Cardiopulmonary resuscitation was required in 6 patients. Thirteen patients with complications died (15.7%); 2 deaths were directly due to complications. Patients with complications were younger, had longer lengths of stay, and had a higher mortality. Length of stay was a positive risk factor for complication risk (odds ratio = 1.09, 95% confidence interval: 1.05 to 1.13; p = 0.0001); other patient characteristics had no predictive effect. Kaplan-Meier estimates showed that the most severe complications occurred early in the PICU stay. The best indicators of patient mortality were number of complications (odds ratio = 2.96, 95% confidence interval 1.72 to 5.08; p = 0.0001), and mortality risk derived from the Pediatric Risk of Mortality Score (odds ratio = 1.08, 95% confidence interval 1.06 to 1.10; p = 0.0001). Mortality was correlated with increasing severity of complications. CONCLUSION: Complications have a significant impact on patient care. Patients may be at increased risk earlier in their PICU course, when the number of interventions may be greatest. Complications may increase patient mortality and predict patient death better than other patient variables.     

Synthesis and triplex forming properties of an acyclic N7-glycosylated guanine nucleoside

A chiral acyclic nucleoside, one in which the ribose carbohydrate has been replaced with a glycerol-based linker, is prepared by glycosylating guanine at the N7-nitrogen. The stereochemically pure derivative is converted to a DMT-protected phosphoramidite for incorporation into DNA sequences. Sequence containing the acyclic N7-dG nucleoside are capable of forming DNA triplexes in which it is likely that the N1-H and N2-amino groups of the N7-dG are involved in recognition of the guanine base in G-C base pairs.     

High resolution XPS characterization of chemical functionalised MWCNTs and SWCNTs

High resolution XPS analysis of chemical functionalised multi-wall carbon nanotubes (MWCNTs) and single wall carbon nanotubes (SWCNT) was done with ESCA300 (overall instrument resolution of 0.35 eV). Information to the degree of functionalisation was ascertained by argon ion bombardment of the samples followed by XPS analysis to detect the functional groups, the percentage atomic concentration of various elements present and whether or not the detected functional groups imposed a chemical shift on the CNT atoms. The results show that true chemical functionalisation was achieved and by argon ion bombardment these functional groups can be altered relative to the C 1s carbon atoms of the CNT. The choice of chemicals used for functionalisation, the techniques employed and the types of nanotubes treated are important factors in chemical characterisation. The carbon atom on the nanotube ring to which the functional group (atom) is bonded, the chirality of the CNT, the electronegativity of the functional group, the bond type and whether the CNT is single-wall or multi-wall, or cut (short) could play a role in determining the chemical shift on the CNTs atoms. These investigations are relevant to chemical functionalisation of carbon nanotubes for various applications for example DNA sensors and other biomedical sensors.     

Effect of potassic and phosphatic fertilizer type, fertilizer Cd concentration and zinc rate on cadmium uptake by potatoes

In some areas of southern Australia, cadmium (Cd) concentrations in excess of the Australian maximum permitted concentration (0.05 mg kg^–1 fresh weight) have been found in tubers of commercially grown potato (Solanum tuberosum L.) crops. Field experiments were therefore conducted in various regions of Australia to determine if Cd uptake by potatoes could be minimised by changes in either phosphorus (P), potassium (K) or zinc (Zn) fertilizer management.Changing the chemical form in which either P fertilizer (monoammonium phosphate, diammonium phosphate, single superphosphate and reactive rock phosphate) or K fertilizer (potassium chloride and potassium sulfate) were added to crops had little influence on tuber Cd concentrations. Fertilizer Cd concentrations also had little influence on tuber Cd concentrations, suggesting that residual Cd in the soil was a major contributor to Cd uptake by the crops on these soils.Addition of Zn at planting (up to 100 kg Zn ha^–1) significantly reduced tuber Cd concentrations at four of the five sites studied. However, the largest variation was between sites rather than between treatments, with site mean tuber Cd concentrations varying tenfold (from 0.018 to 0.177 mg Cd kg^–1 fresh weight). Factors associated with irrigation water quality at the sites, in particular the chloride concentration, appeared to dominate any effects of changing fertilizer type or Cd concentration.