Carbon Bonding State Has a Small Effect on Melting of Direct-Reduced Iron

Metallurgical and Materials Transactions B - The concentration and chemical bonding state of carbon in direct-reduced iron (DRI) might affect DRI melting temperature and rate. The effects of carbon...     

Upgrading coal-derived liquids to diesel fuel

Distilled fractions of a coal-derived liquid from the H-Coal process were upgraded to diesel fuel by catalytic hydrotreatment. The total hydrotreated products were distilled into naphtha (<180°C) and diesel fuel fractions (>180°C) and the diesel fractions were analysed for hydrocarbon-type composition, hydrogen content and some diesel fuel properties. GC—MS-analyses were carried out on the hydrocarbon-type fractions to identify individual chemical compounds. To investigate the effect of different distillation cut points on diesel fuel yield and properties, cut points for one hydrotreated product were varied. The diesel fuel cetane numbers were correlated with percentage hydrogen, total aromatics and saturates. Cetane numbers above 40 were obtained for diesel fuels containing (i) more than 75% saturates, (ii) less than 15% total aromatics and (iii) a hydrogen content above 12.8%. Compounds identified by GC—MS-analyses (in the diesel fractions) were typical aromatic and cycloparaffin compounds. Normal-and iso-paraffin compounds were not detected. By varying the distillation cut point from 135 to 180°C, the cetane number of the residual diesel fraction improved from 37 to 44. This increase is ascribed to the removal of aromatic compounds in the 135–180°C boiling point range.     

Interspecies Behavioral Variability of Medaka Fish Assessed by Comparative Phenomics

Recently, medaka has been used as a model organism in various research fields. However, even though it possesses several advantages over zebrafish, fewer studies were done in medaka compared to zebrafish, especially with regard to its behavior. Thus, to provide more information regarding its behavior and to demonstrate the behavioral differences between several species of medaka, we compared the behavioral performance and biomarker expression in the brain between four medaka fishes, Oryzias latipes, Oryzias dancena, Oryzias woworae, and Oryzias sinensis. We found that each medaka species explicitly exhibited different behaviors to each other, which might be related to the different basal levels of several biomarkers. Furthermore, by phenomics and genomic-based clustering, the differences between these medaka fishes were further investigated. Here, the phenomic-based clustering was based on the behavior results, while the genomic-based clustering was based on the sequence of the nd2 gene. As we expected, both clusterings showed some resemblances to each other in terms of the interspecies relationship between medaka and zebrafish. However, this similarity was not displayed by both clusterings in the medaka interspecies comparisons. Therefore, these results suggest a re-interpretation of several prior studies in comparative biology. We hope that these results contribute to the growing database of medaka fish phenotypes and provide one of the foundations for future phenomics studies of medaka fish.     

Comparing the Performance of Organic Solvent Nanofiltration Membranes in Non-Polar Solvents

Organic solvent nanofiltration (OSN) is gradually expanding from academic research to industrial implementation. The need for membranes with low and sharp molecular weight cutoffs that are able to operate under aggressive OSN conditions is increasing. However, the lack of comparable and uniform performance data frustrates the screening and membrane selection for processes. Here, a collaboration is presented between several academic and industrial partners analyzing the separation performance of 10 different membranes using three model process mixtures. Membrane materials range from classic polymeric and thin film composites (TFCs) to hybrid ceramic types. The model solutions were chosen to mimic cases relevant to today's industrial use: relatively low molar mass solutes (330–550 Da) in n-heptane, toluene, and anisole.     

Enhancement of phenolic compounds content and antioxidant activity of strawberry (Fragaria × ananassa) juice by block freeze concentration technology

The aim of this study was to evaluate the effects of freeze concentration of strawberry juice on content of total phenolic, anthocyanins content and antioxidant activity of the concentrated fluid and the ice obtained. An increase in the values of phenolic content was observed in the concentrate fraction for all the freeze concentration stages (five stages). The process efficiency presented a reduction when compared with the first stage, and however, the average efficiency remained around 65% in all the stages. The concentration of pelargonidin‐3‐O‐glycoside present in samples was increased in all stages. Furthermore, the antioxidant activity of the concentrated fluid of each stage, measured by DPPH and ABTS methods, was significantly higher in comparison with the juice feed. Also, antioxidant activity can be correlated with the content of pelargonidin‐3‐O‐glycoside presented in the strawberry juice. Freeze concentration can be considered a good alternative for improving the antioxidant activity of strawberry juice.     

Study on Reduction of MoO2 Powders with CO to Produce Mo2C

Molybdenum hemicarbide (Mo₂C), which is widely applied in steel and metal ceramics as well as catalysts, was successfully synthesized by using a simple method of reducing MoO₂ powders by CO. It was found that the final reduction product was all Mo₂C under both isothermal and nonisothermal conditions. However, the reduction mechanisms were significantly different at lower and higher temperatures: at lower temperatures (1070 to 1342 K), reduction of MoO₂ to Mo₂C followed a one‐step reaction (simultaneous reduction and carburization), while at higher temperatures (1423 to 1485 K), MoO₂ was first reduced to metallic Mo, and then Mo was carburized to Mo₂C. Mo₂C particles obtained at higher temperatures contained micrometer‐sized surface features which formed during the MoO₂ to Mo reduction step.     

Photosensitivity of <Emphasis Type="Italic">n</Emphasis>-CdS/<Emphasis Type="Italic">p</Emphasis>-CdTe heterojunctions obtained by chemical surface deposition of CdS

A new technology of chemical surface deposition is developed, and thin CdS films (35–100 nm) on the p-CdTe substrates are obtained. Electrical and photoelectric properties of n-CdS/p-CdTe heterojunctions are studied, and it is shown that the developed method provides high efficiency of photoconversion in the range restricted by the CdTe and CdS band gaps. It is shown that the method of chemical surface deposition of CdS can be used in the design of thin-film n-CdS/p-CdTe.     

Biomass production and small-scale testing of freeze-dried lactic acid bacteria starter strains for cassava fermentations

Based on their predominance in Gari fermentations, as well as suitable technological properties, Lactobacillus plantarum, Lactobacillus fermentum, Weissella paramesenteroides and Leuconostoc mesenteroides strains were investigated for their suitability for development as starter strains for this African traditional fermented cassava product. The strains were grown in optimized growth media in 2 L fermenters, harvested and freeze dried, and then tested in lab-scale cassava mash fermentation trials for their ability to ferment the cassava. The strains performed well and rapidly increased the titratable acidity from 1.1 to 1.3% at 24 h to 1.3–1.6% at 48 h. The benefit of including starter cultures was that it lowered the pH of the product much faster and to lower levels than in the uninoculated control fermentation. The results furthermore indicated that especially the L. plantarum-group strains could be produced as starter strains at low cost. Overall, the results of this study showed that starter strains could be easily and economically produced, and thus represent a feasible possibility for further development for application in the field.     

Production and characterization of pure and Cr<Superscript>3+</Superscript>-doped hydroxyapatite for biomedical applications as fluorescent probes

Pure and Cr³⁺-doped hydroxyapatite (HAP) were prepared via chemical precipitation route. The XRD measurements revealed that the typical HAP powder pattern was obtained. SEM analysis indicated that aggregates of nanoparticles were formed. EDX analysis indicates that the [Ca]/[P] concentration ratio was higher than the expected values but can be explained by the presence of carbonate groups as dopants. The optical absorption spectra of the doped samples presented absorption bands typical of Cr³⁺ occupying to different crystalline sites. From the position of the bands, it was possible to estimate the crystal field parameters for both sites of Cr³⁺ in the HAP matrix. The emission spectra of the Cr-doped samples were also investigated and typical transitions of the dopant ion, in trivalent state, were identified. The potential use of the Cr³⁺-HAP as fluorescent probes for medical applications was discussed.     

Transient Inclusion Evolution During Modification of Alumina Inclusions by Calcium in Liquid Steel: Part II. Results and Discussion

The formation of intermediate reaction products after calcium addition to aluminum-killed steel was studied. Steel samples were taken from laboratory and industrial heats before and at various times after calcium treatment. Inclusions were characterized by automated and manual scanning electron microscopy and X-ray microanalysis of polished cross sections and inclusions extracted by dissolution of the steel. Industrial and laboratory melts containing more than 40 parts per million (by mass) of dissolved sulfur showed calcium sulfide as the main reaction product after calcium injection, with calcium aluminates appearing later. It is proposed that the calcium aluminates are formed by reaction between the calcium sulfide and the alumina. A laboratory heat containing 7 parts per million of sulfur showed calcium oxide as the main initial calcium reaction product. A simple mechanism is proposed for the modification of alumina inclusions by calcium, considering transient CaO and CaS formation.