Research and development of liquid hydrogen (LH2) temperature monitoring system for marine applications

Monitoring the temperature in liquid hydrogen (LH₂) storage tanks on ships is important for the safety of maritime navigation. In addition, accurate temperature measurement is also required for commercial transactions. Temperature and pressure define the density of liquid hydrogen, which is directly linked to trading interests. In this study, we developed and tested a liquid hydrogen temperature monitoring system that uses platinum resistance sensors with a nominal electrical resistance of approximately 1000 Ω at room temperature, PT-1000, for marine applications. The temperature measurements were carried out using a newly developed temperature monitoring system under different pressure conditions. The measured values are compared with a calibrated reference PT-1000 resistance thermometer. We confirm a measurement accuracy of ±50 mK in a pressure range of 0.1 MPa–0.5 MPa.     

Three-dimensional analysis of a Cherenkov laser via particlesimulation

For a three-dimensional (3-D) Cherenkov laser composed of a dielectric-loaded rectangular waveguide and a finite-width planar relativistic electron beam, the nonlinear characteristics and efficiency enhancement are investigated with the aid of particle simulation, allowing for the nonlinear properties of the electron beam. The numerical results obtained in the paper are compared with those obtained in the two-dimensional (2-D) analysis. The efficiency enhancement scheme, which was previously proposed for the 2-D case, is found to be effective also for the 3-D case     

Dehydrogenative Cracking of n-Butane over Modified HZSM-5 Catalysts

Dehydrogenative cracking reaction of n-butane was studied using HZSM-5 catalyst modified with various metal oxides. Alkaline earth (magnesium), transition metal (cobalt) and rare earth (lanthanum) elements are used for the modification. The selectivity of the products was studied at low conversion (20%). Methane, ethane, ethylene, propylene, butenes and butadiene were the main products. With the use of the cobalt- or magnesium-containing HZSM-5, dehydrogenative cracking was observed and the selectivity of ethylene was much larger than that of ethane. On the other hand, the selectivity of ethylene and ethane were almost the same in the reaction using the lanthanum-containing HZSM-5. It is considered that the cobalt- and magnesium-loaded sites on HZSM-5 played an important role in the dehydrogenative cracking.     

Safety design

JAERI established the safety design philosophy of the HTTR based on that of current reactors such as LWR in Japan, considering inherent safety features of the HTTR. The strategy of defense in depth was implemented so that the safety engineering functions such as control of reactivity, removal of residual heat and confinement of fission products shall be well performed to ensure safety. However, unlike the LWR, the inherent design features of the high-temperature gas-cooled reactor (HTGR) enables the HTTR meet stringent regulatory criteria without much dependence on active safety systems. On the other hand, the safety in an accident typical to the HTGR such as the depressurization accident initiated by a primary pipe rupture shall be ensured. The safety design philosophy of the HTTR considers these unique features appropriately and is expected to be the basis for future Japanese HTGRs.This paper describes the safety design philosophy and safety evaluation procedure of the HTTR especially focusing on unique considerations to the HTTR. Also, experiences obtained from an HTTR safety review and R&D needs for establishing the safety philosophy for the future HTGRs are reported.     

An outbreak of food-borne listeriosis due to cheese in Japan, during 2001

Food-borne outbreaks caused by Listeria monocytogenes have been recognized in US and European countries. Only sporadic cases, of neonatal listeriosis, have been reported in Japan. Since L. monocytogenes has been often isolated from foods in Japan, food-borne outbreaks potentially could have occurred. In February 2001, L. monocytogenes serotype 1/2b was isolated from a washed-type cheese during routine Listeria monitoring of 123 domestic cheeses. Further samples from products and the environments at the plant that produced the contaminated cheese were examined for L. monocytogenes. L. monocytogenes serotype 1/2b was detected in 15 cheese samples, at most probable number that ranged from <30 to 4.6 x 10(9)/100 g, and in environmental samples. Studies with people who had consumed cheese from the plant revealed 86 persons who had been infected with L. monocytogenes. Thirty-eight of those people had developed clinical symptoms of gastroenteritis or the common cold type after the consumption of cheese. Isolates from those patients exhibited the same serotype, pathogenicity for mice and HeLa cells, DNA fingerprinting patterns and PCR amplification patterns. From the epidemiological and genetic evidence, it appeared that the outbreak was caused by cheese. This is the first documented incidence of food-borne listeriosis in Japan.     

Influence of sodium impurities on arf excimer-laser-induced absorption in CaF2 crystals

The formation of color centers induced by irradiation with ArF excimer lasers in CaF(2) crystals was found to depend strongly on the sodium impurity concentration. Sodium-related color centers were generated by two-photon absorption because the slope of the induced absorption coefficient just after irradiation started was proportional to the square of the laser fluence. The saturation absorption also depended on laser fluence, and a photobleaching induced absorption phenomenon was observed. We concluded that the saturation absorption level was determined by the equilibrium between two-photon excitation and one-photon reverse reaction.     

Analog Circuit Design Methodology in a Low Power RISC Microprocessor

There are various kinds of analog CMOS circuits in microprocessors. IOs, clock distribution circuits including PLL, memories are the main analog circuits. The circuit techniques to achieve low power dissipation combined with high performance in newest prototype chip in the Super H RISC engines are described. A TLB delay can be decreased by using a CAM with a differential amplifier to generate the match signal. The accelerator circuit also helps to speed up the TLB circuit, enabling single-cycle operation. A fabricated 96-mm² test chip with the super H architecture using 0.35-m four metal CMOS technology is capable of 167-MHz operation at 300 Dhrystone MIPS with 2.0-W power dissipation.     

Regional noise prediction and management system using remote sensing

Abstract

This paper deals with the prediction and management of regional and environmental noise using remote sensing techniques. Landsat-MSS and -TM data are used to estimate noise pollution by means of a group method of data handling. They estimate ground roughness from the proportion of the area occupied by buildings thus determining the shielding factor of noise propagation on the ground. The noise level predicted by the method presented in this paper showed a satisfactory agreement with that obtained from measurements from various other cases in urban areas.