Linewidth and FM characteristics of a distributed feedback laser monolithically integrated with a tunable external cavity

A narrow linewidth has been obtained in a new 1.5 ?m distributed feedback laser integrated monolithically with a tunable external cavity. The linewidth of 18 MHz has been achieved by tuning the current in the external cavity, and the FM response was flat from 100 kHz to 500 MHz.     

External Synchronization of 160-GHz Optical Beat Signal by Optical Phase-Locked Loop Technique

We have synchronized a 160-GHz optical beat signal with a 40-GHz reference optical pulse train by using an optical phase-locked loop (OPLL). The OPLL consists of an optical beat signal source, comprising a pair of three-electrode distributed feedback laser diodes that works as a voltage controlled oscillator, and an all-optical phase detector based on the two-photon absorption in a silicon avalanche photodiode. Phase-locking operation is confirmed through phase-error measurement and cross-correlation trace measurement. The residual timing jitter of the 160-GHz optical beat signal relative to the reference pulse train, in the bandwidth of 80 MHz, is measured to be as small as 126 fs     

Highly reliable a‐IGZO TFTs on a plastic substrate for flexible AMOLED displays

We have successfully reduced threshold voltage shifts of amorphous In–Ga–Zn–O thin‐film transistors (a‐IGZO TFTs) on transparent polyimide films against bias‐temperature stress below 100 mV, which is equivalent to those on glass substrates. This high reliability was achieved by dense IGZO thin films and annealing temperature below 300 °C. We have reduced bulk defects of IGZO thin films and interface defects between gate insulator and IGZO thin film by optimizing deposition conditions of IGZO thin films and annealing conditions. Furthermore, a 3.0‐in. flexible active‐matrix organic light‐emitting diode was demonstrated with the highly reliable a‐IGZO TFT backplane on polyimide film. The polyimide film coating process is compatible with mass‐production lines. We believe that flexible organic light‐emitting diode displays can be mass produced using a‐IGZO TFT backplane on polyimide films.     

Three-dimensional board-to-board free-space optical interconnects and their application to the prototype multiprocessor system: COSINE-III

A prototype multiprocessor system using three-dimensional board-to-board free-space optical interconnects is constructed for the first time to our knowledge. In the system, 64 processing units form a three-dimensional mesh processor network with the help of bidirectional board-to-board free-space optical interconnects. A theoretical analysis shows that the three-dimensional board-to-board freespace optical interconnects effectively solve common interconnection problems such as wiring congestion, signal delay, and clock skew. The prototype system, COSINE-III, is confirmed to work well as a multiprocessor system. The system is also shown to be easy to extend to a larger and more flexible system.     

Influence of pH on the permeability of p-toluidine and aminopyrine through shed snake skin as a model membrane

The influence of pH on the permeability of p-toluidine (pKa, 5.3) and aminopyrine (pKa, 5.0) through shed snake skin as a model membrane was studied. The pH was adjusted to several values, and the solubility of the drugs in each donor was measured. Flux rates and permeability coefficients were calculated from the steady-state penetration portions. The flux rates of p-toluidine decreased as the pH value in the donor solution increased. On the other hand, the flux rates of aminopyrine were constant at any pH value. The permeability coefficients of each drug increased as the pH value in the donor solution increased. The partition coefficients (octanol/buffer) of each drug were dependent on the molecular fraction of un-ionized species. From these results, it is suggested that ionized species of p-toluidine transports through shed snake skin, but the ionized species of aminopyrine does not.     

Generation of 80-nm Wavelength-Tunable 100-fs Pulse Based on Comblike Profiled Fiber Comprised of HNLF and Zero Dispersion-Slope NZDSF

To realize extremely wideband wavelength-tunable femtosecond (fs) pulse generation, we propose a dispersion-flattened comblike profiled fiber that is a pulse compressor comprised of low dispersion-slope highly nonlinear fiber and zero dispersion-slope nonzero dispersion-shifted fiber (ZDS-NZDSF). We also apply ZDS-NZDSF to a soliton converter to reshape and compress a seed pulse train generated from a tunable laser source and an intensity modulator. Using the proposed scheme, we successfully generate 100-fs optical pulse from the seed pulse with the varied wavelengths of 1530, 1570, and 1610 nm     

Fabrication and current-drive of SiGe/Si 'Micro-origami' epitaxial MEMS device on SOI substrate

A micromirror structure with SiGe/Si heteroepitaxial layer on a silicon-on-insulator (SOI) substrate using a 'Micro-origami' technique has been successfully fabricated. The micromirror is supported by two curved hinge structures. The device is driven by application of a current, and net angular displacements larger than 10/spl deg/ (static) and 30/spl deg/ (in resonance) were obtained. These values are comparable with or even larger than the reported values for other MEMS optical switches or beam scanning devices. The experimental results suggest that the movement is evoked by a thermal effect. The Micro-origami device has advantages of low operation voltage smaller than 2 V, and structural compatibility with the Si or SiGe LSIs.     

Image enlargement based on self-produced codebook

A new image enlargement method for the estimation of high frequency image components lost in the sampling process is proposed. The method uses a codebook consisting of the low- and high-frequency components of an original image itself that is to be enlarged. The effectiveness of the proposed method is verified by comparing with conventional methods     

Footprint analysis of the RAG protein recombination signal sequence complex for V(D)J type recombination

We have studied the interaction between recombination signal sequences (RSSs) and protein products of the truncated forms of recombination-activating genes (RAG) by gel mobility shift, DNase I footprinting, and methylation interference assays. Methylation interference with dimethyl sulfate demonstrated that binding was blocked by methylation in the nonamer at the second-position G residue in the bottom strand and at the sixth- and seventh-position A residues in the top strand. DNase I footprinting experiments demonstrated that RAG1 alone, or even a RAG1 homeodomain peptide, gave footprint patterns very similar to those obtained with the RAG1-RAG2 complex. In the heptamer, partial methylation interference was observed at the sixth-position A residue in the bottom strand. In DNase I footprinting, the heptamer region was weakly protected in the bottom strand by RAG1. The effects of RSS mutations on RAG binding were evaluated by DNA footprinting. Comparison of the RAG-RSS footprint data with the published Hin model confirmed the notion that sequence-specific RSS-RAG interaction takes place primarily between the Hin domain of the RAG1 protein and adjacent major and minor grooves of the nonamer DNA.     

InGaAsP/InP monolithic integrated circuit with lasers and an optical switch

InGaAs/InP monolithic integrated circuits composed of a compact carrier-injection optical switch and distributed feedback laser diodes are fabricated. These integrated circuits have a variety of functions, such as monolithic modulators, switches and optical amplifiers for optical communication systems.