Biaxial-load effects on isopachics for a crack at the interface of dissimilar media

Summary The plane problem of two dissimilar materials, bonded together and containing a crack along their common interface, which were subjected to a biaxial load at infinity, is examined by giving a closed-form expression for the first stress invariant of the normal stresses, which is equally valid everywhere, near to, and far from, the crack-tip region. This exact expression for the first-stress invariant is compared by constructing the respective isopachic-fringe patterns, to the approximate expression with non-singular terms, due to the biaxiality factor, for the same quantity. Significant differences between respective isopachic-patterns were found and their dependence on the elastic properties of both materials and the applied loads was demonstrated. The relative errors between the computedK _I - andK _II -components by using the approximate expression for the first stress-invariant and the accurate one, derived from closed-form solution along either isopachic-fringes or along circles and radii from the crack-tip have been given, indicating in some cases large discrepancies between exact and approximate solutions.With 7 Figures     

Routing for disruption tolerant networks: taxonomy and design

Communication networks, whether they are wired or wireless, have traditionally been assumed to be connected at least most of the time. However, emerging applications such as emergency response, special operations, smart environments, VANETs, etc. coupled with node heterogeneity and volatile links (e.g. due to wireless propagation phenomena and node mobility) will likely change the typical conditions under which networks operate. In fact, in such scenarios, networks may be mostly disconnected, i.e., most of the time, end-to-end paths connecting every node pair do not exist. To cope with frequent, long-lived disconnections, opportunistic routing techniques have been proposed in which, at every hop, a node decides whether it should forward or store-and-carry a message. Despite a growing number of such proposals, there still exists little consensus on the most suitable routing algorithm(s) in this context. One of the reasons is the large diversity of emerging wireless applications and networks exhibiting such “episodic” connectivity. These networks often have very different characteristics and requirements, making it very difficult, if not impossible, to design a routing solution that fits all. In this paper, we first break up existing routing strategies into a small number of common and tunable routing modules (e.g. message replication, coding, etc.), and then show how and when a given routing module should be used, depending on the set of network characteristics exhibited by the wireless application. We further attempt to create a taxonomy for intermittently connected networks. We try to identify generic network characteristics that are relevant to the routing process (e.g., network density, node heterogeneity, mobility patterns) and dissect different “challenged” wireless networks or applications based on these characteristics. Our goal is to identify a set of useful design guidelines that will enable one to choose an appropriate routing protocol for the application or network in hand. Finally, to demonstrate the utility of our approach, we take up some case studies of challenged wireless networks, and validate some of our routing design principles using simulations.     

Solution-processable graphene linked to 3,5-dinitrobenzoyl as an electron acceptor in organic bulk heterojunction photovoltaic devices

3,5-Dinitrobenzoyl chloride was covalently linked to graphene oxide (GO) nanosheets prepared by a modified Hummers’ method, using ethylenediamine as a spacer. The linkage of the GO with the small molecule was confirmed by spectroscopic (e.g., Fourier transform infrared, Raman) and microscopic analyses. The resultant GO-ethylene-dinitro-benzoyl (GO-EDNB) consists of a controlled scale of different graphene structures and is highly dispersable in common organic solvents. The GO-EDNB was used as the electron acceptor material in poly-(3-hexylthiophene) (P3HT) bulk heterojunction photovoltaic devices to significantly improve the performance, yielding a power conversion efficiency improvement of two orders and one order of magnitude compared with the pristine P3HT and the P3HT-GO devices respectively.     

Finite element stress analysis of unilaterally supported submarine pipelines

A linear-elastic finite element model is applied to the solution of stress analysis problems involving submarine pipelines freely resting upon irregular seabed profiles. The structural matrix system is derived on an equal length element assembly basis, thus enabling the formulation of a particularly compact 3 d.f. nodal equation algorithm. The unknown contact points and the pipeline deformations are simultaneously identified with the aid of a successive over-relaxation solution algorithm. Tensions generated due to mean internal and external fluid pressure differences are taken into account. Surcharge imposition proves beneficial for the control of critical pipeline over-stressing and upward lift during pressurization. Case study details of the installation design for a subsea dual pipeline crossing are included. A FORTRAN subroutine is provided for illustration purposes of the proposed numerical technique.     

Efficient Routing in Intermittently Connected Mobile Networks: The Single-Copy Case

Intermittently connected mobile networks are wireless networks where most of the time there does not exist a complete path from the source to the destination. There are many real networks that follow this model, for example, wildlife tracking sensor networks, military networks, vehicular ad hoc networks (VANETs), etc. In this context, conventional routing schemes would fail, because they try to establish complete end-to-end paths, before any data is sent. To deal with such networks researchers have suggested to use flooding-based routing schemes. While flooding-based schemes have a high probability of delivery, they waste a lot of energy and suffer from severe contention which can significantly degrade their performance. With this in mind, we look into a number of ldquosingle-copyrdquo routing schemes that use only one copy per message, and hence significantly reduce the resource requirements of flooding-based algorithms. We perform a detailed exploration of the single-copy routing space in order to identify efficient single-copy solutions that (i) can be employed when low resource usage is critical, and (ii) can help improve the design of general routing schemes that use multiple copies. We also propose a theoretical framework that we use to analyze the performance of all single-copy schemes presented, and to derive upper and lower bounds on the delay of any scheme.     

Acid gelation of low acyl gellan gum relevant to self-structuring in the human stomach

The aim of this study was to investigate the in vitro acid-induced gelation of low acyl gellan gum. Various metabolically relevant pH environments and hydrocolloid concentrations were investigated. These resulted in very different acid structures, which were characterised by texture analysis, with Young’s and bulk moduli and work of failure being reported. The structures of the acid gels were shown to depend upon the pH and hydrocolloid concentration (c) used during their production, with a maximum in gel strength between pH 3 and 4. Both the Young’s and bulk moduli data suggest that there is a critical concentration for gelation to occur, and both parameter values displayed a gradual increase (which appears to be lower than a c² dependency) as the gellan concentration was increased.     

Resistance variation of low-quality aggregates

With an ever-decreasing source of aggregate, this study reports laboratory tests on geologically young material, some of which is unconsolidated, in order to determine whether they can be used as aggregates. Los Angeles abrasion and aggregate impact values were compared and correlations made between these parameters and the petrographic composition of the material, as well as some other common properties (particle shape, water absorption). The drift deposits tested consisted mainly of limestone gravels although clasts of sandstone with some deleterious chert and fine material were also present. Whilst the laboratory test results did not always conform to the requirements of the common Standards for aggregates, it was considered that, with appropriate processing, many of the materials could be used.      

Evolving Patterns: Correlated Systems of Interaction

Over the last four decades, the onset of computation has enabled architects and designers to employ generative patterns in their exploration of emergent social, material and spatial systems. Theodore Spyropoulos provides an overview of the field and discusses how it has been developed by the Design Research Lab (DRL) at the Architectural Association into an ‘Adaptive Ecologies’ agenda. In the context of parametric urbanism, the DRL has explored models of living through behavioural patterns found in nature, examining the role of the singular and the collective. Copyright © 2009 John Wiley & Sons, Ltd.     

Radical Interface AA New Media Research Initiative

At the Architectural Association in London, Joel Newman, Theodore Spyropoulos and Vasilis Stroumpakos are spearheading the New Media Research Initiative. Here they call for architecture to abandon its hold on the formal qualities of the physical in favour of a mode of experience that provides an interface that fully reflects the way we inhabit space today. Copyright © 2008 John Wiley & Sons, Ltd.