Finite element beam propagation method for three-dimensionaloptical waveguide structures

A beam propagation method (BPM) based on the finite element method (FEM) is described for longitudinally varying three-dimensional (3-D) optical waveguides. In order to avoid nonphysical reflections from the computational window edges, the transparent boundary condition is introduced. The present algorithm using the Pade approximation is, to our knowledge, the first wide-angle finite element beam propagation method for 3-D waveguide structures. To show the validity and usefulness of this approach, numerical results are shown for Gaussian-beam excitation of a straight rib waveguide and guided-mode propagation in a Y-branching rib waveguide     

Separation of di- and tripeptides with solvent extraction and an emulsion liquid membrane

The extraction equilibria of various di- and tripeptides with di-2-ethylhexylphosphoric acid (D2EHPA) were studied at low pH values. The complex extracted to organic phase consisted of one molecule of peptide and two molecules of D2EHPA dimer. The extraction constants of the peptides correlated well with the distribution coefficients of peptides between 1-octanol and water, which is a measure of hydrophobicity. The permeation rates of peptides through an emulsion liquid membrane were examined by using D2EHPA as a carrier, Span 80 as an emulsifier and kerosene as a diluent. The rates varied considerably with peptide type, depending upon the hydrophobicity.     

Non-linear current–voltage characteristics related to native defects in SrTiO3 and ZnO bicrystals

SrTiO₃ and ZnO bicrystals with various types of boundaries were fabricated in order to examine their current–voltage characteristics across single grain boundaries. Their grain boundary structures were also investigated by high-resolution transmission electron microscopy. In Nb-doped SrTiO₃, electron transport behaviors depend on the type of boundaries. Random type boundaries exhibit highly non-linear current–voltage characteristics, while low angle boundaries show a slight non-linearity. On the contrary, undoped ZnO does not exhibit non-linear current–voltage characteristics in any type of boundaries including random ones. It is suggested that the differences observed in current–voltage properties between the two systems are mainly due to the difference in the accumulation behavior of acceptor-like native defects at grain boundaries. A clear non-linearity is obtained by means of Co-doping even for the highly coherent Σ1 boundary in a ZnO bicrystal. This is considered to result from the production of acceptor-like native defects by Co-doping.     

NiCoFe/C cathode electrocatalysts for direct ethanol fuel cells

A direct ethanol fuel cell (DEFC), which is less prone to ethanol crossover, is reported. The cell consists of PtRu/C catalyst as the anode, Nafion^® 117 membrane, and Ni–Co–Fe (NCF) composite catalyst as the cathode. The NCF catalyst was synthesized by mixing Ni, Co, and Fe complexes into a polymer matrix (melamine-formaldehyde resins), followed by heating the mixture at 800 °C under inert atmosphere. TEM and EDX experiments suggest that the NCF catalyst has alloy structures of Ni, Co and Fe. The catalytic activity of the NCF catalyst for the oxygen reduction reaction (ORR) was compared with that of commercially available Pt/C (CAP) catalyst at different ethanol concentrations. The decrease in open circuit voltage (V_oc) of the DEFC equipped with the NCF catalysts was less than that of CAP catalyst at higher ethanol concentrations. The NCF catalyst was less prone to ethanol oxidation at cathode even when ethanol crossover occurred through the Nafion^®117 film, which prevents voltage drop at the cathode. However, the CAP catalyst did oxidize ethanol at the cathode and caused a decrease in voltage at higher ethanol concentrations.     

2D artificial life system using network-type assembly-like language: influence of change in environment with costs of instructions

To unlock the full potential of evolution in digital media, a Tierra-like system using network-type assembly-like language has been constructed. In the system, like Avida, digital creatures, self-replicating programs, live in a discrete 2D torus space and an interaction between creatures is restricted locally. Bearing a genetic network in mind, network structure is introduced. In the previous works, it is shown that the possibility that the network-type model has more potential of evolution than a linear-type model like Avida in a simple environment. In this paper, to study the potential of evolution more precisely, we model the effects of environment other than creatures. As one of the simplest models of such environment, the cost of execution, i.e. executing time, is introduced. The difficult environment to live in costs high to execute instructions, the easy environment does low. In computer experiments, we have investigated the influence of change in environment by analyzing the process of evolution and diversity of the system. Experimental results show that the network-type system keeps more stable diversity than the linear-type system does, even when the environment changes drastically. This indicates the possibility that the network-type system has more potential of evolution than the linear-type system has. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

The tricarboxylic acid cycle in Dictyostelium discoideum. Systemic effects of including protein turnover in the current model

The current model for the tricarboxylic acid cycle in Dictyostelium discoideum is based on extensive experimental studies of enzyme kinetics in vitro and of metabolite fluxes measured in vivo. In the previous papers (Shiraishi, F., and Savageau, M. A. (1992) J. Biol. Chem. 267, 22912-22918; 22919-22925; 22926-22933; 22934-22943) of this series we have carried out extensive analyses of the current model within the framework of biochemical systems theory with a view toward understanding the behavior of the integrated system. The model was found to be ill determined with respect to at least three of its features. In this paper we propose a minimal modification in the model that is consistent with previous experimental data but also includes recycling of amino acids for protein synthesis, one of the neglected features identified as important in the previous analysis. We again perform an analysis within the framework of biochemical systems theory to determine the systemic consequences of this change. The results show that the robustness of the modified model, as determined by the parameter sensitivities, is improved by 2 orders of magnitude over that of the previous model. Analysis of the dynamics shows that the turnover times for the pools of alanine, glutamate, and aspartate are reduced by 2 orders of magnitude and made more physiologically realistic. The distribution of flux is no longer rigidly fixed, and problems previously centered on the metabolism of pyruvate have been partially alleviated. Continued discrepancies lead us to question the degree to which kinetic data obtained with purified enzymes in vitro faithfully reflect the kinetic behavior of the integrated enzyme system in vivo. We must continue to re-examine the manner in which the kinetics of reactions in vivo are represented and to reassess the physical conditions that prevail in vitro and in vivo. Results in this paper direct our attention toward specific aspects of the system where these efforts should be focused. Thus, a minimal modification of the previous model has led to several improvements that make it more representative of the tricarboxylic acid cycle in D. discoideum, and the analysis in this paper leads to further predictions for improving the model.     

《最终幻想Ⅺ》的更新系统设计

对于如何提供补丁下载，单机PC游戏开发人员已经是轻车熟路了，这些补丁包里通常包含玩家需要手动更新的数据和二进制文件．但基本上．他们很少会为了补丁下载而创建一个“更新系统”。     

Motility related protein 1 (MRP1/CD9) expression in colon cancer

STUDY OBJECTIVES: To examine the incidence and clinical significance of prolonged air leak (PAL) in patients undergoing radical upper lobectomy and to determine potential risk factors for PAL in this group of patients. DESIGN: Retrospective review of a prospective database. SETTING: Experience of one thoracic surgeon at a tertiary care cancer center. PATIENTS: One hundred consecutive patients undergoing right upper lobectomy and mediastinal lymph node dissection for non-small cell lung cancer over an 11-year period. MEASUREMENTS: PAL was defined as an air leak lasting >7 days. Preoperative, intraoperative, and postoperative clinical data were collected and analyzed to determine the factors associated with PAL. RESULTS: PAL was the most prevalent postoperative complication, comprising 25.5% of all complications seen, and lasting an average of 12.1+/-5.3 days. In 21 of the 26 patients with PAL, this complication was the only morbidity identified. There was no statistically significant difference in patient age, gender, preoperative FEV1 and diffusion of carbon monoxide, exposure to neoadjuvant chemotherapy, status of pulmonary fissures, or pathologic stage between the PAL group vs the remaining 74 patients without this complication. A significantly greater proportion of patients with PAL had FEV1/FVC ratio < or =50% (6/26 vs 5/74; p=0.02). Patients with PAL had significantly longer median length of hospital stay (11 vs 7 days; p=0.0001). Moreover, PAL was the single most common reason for an extended length of hospitalization (21/58, 36% of all causes). CONCLUSION: PAL is an alarmingly common postoperative complication and is the most frequent cause of an extended length of hospital stay in patients undergoing radical upper lobectomy. Severe obstructive pulmonary disease predisposes patients to the development of this complication.     

Vapor phase hydroformylation of ethene over Co/SiO2 promoted by noble metals: dynamic in situ diffuse reflectance FT-IR study of surface species

An in situ diffuse reflectance FT-IR technique was employed to investigate the active surface species and the reaction mechanism of the oxygenate formation in the vapor phase hydroformylation of ethene on Co/SiO₂ promoted with various noble metals such as Ir, Rh, Pt, Re, Ru, and Pd. Co(A)/SiO₂ and Ir(CO)/SiO₂ which were derived from cobalt(II) acetate and Ir₄(CO)₁₂, respectively, were quite inactive in the reaction, and showed only quite small peaks of adsorbed CO under the conditions of 1.1 MPa of C₂H₄/CO/H₂ at 298 K. In contrast, Co(A)-Ir(CO)/SiO₂, which were very active in the reaction, exhibited strong absorption bands of linear and bridged CO species. At 423–463 K, propanal adsorbed on the catalyst and acyl species which is suggested as the intermediate for the formation of propanal were also observed on this catalyst. By exposing CO preadsorbed on this catalyst to C₂H₄/H₂ at 289 K and 0.1 MPa, the intensity of the linear CO band decreased, and the bands of propanal and acyl species emerged simultaneously, whereas that of the bridged CO band remained constant after the initial drop. These results suggested that the oxygenates are formed via the CO insertion into adsorbed ethyl species, and linear CO species plays a major role in the CO insertion on these noble metal-promoted cobalt catalysts.