On the existence of periodic motion and the maximum sector bounds for absolute stability of nonlinear nonstationary systems

In this contribution we consider the absolute stability problem. We derive necessary and sufficient conditions for the existence of periodic motion using an operator approach. The results yield an efficient algorithm to approximate the maximum sector bounds for absolute stability numerically.     

Carpal fractures in children

This study addresses the likelihood of false negative urine pregnancy test results, due to physiological urine dilution as described in some anecdotal reports. In this prospective study 320 pregnancy tests were performed on urine samples of varying concentrations obtained from 40 women, with suspected complications of early pregnancy, who had presented for ultrasound scans. Four different pregnancy tests were used and serum betahCG levels were measured quantitatively. Despite a mean fivefold increase in urine dilution, the pregnancy tests with low betahCG detection limits maintained maximal sensitivity. The detection of betahCG in dilute urine was adversely affected by using pregnancy tests with higher betahCG detection limits and these tests should be used with caution when assessing gynaecological emergencies.     

Aging behavior of a hot‐cured epoxy system

The thermal and hydro‐thermal aging of a hot‐cured epoxy system (diglycidylether of bisphenol A (DGEBA) + dicyandiamide (DDA)) in the glassy state is revisited using DSC and IR attenuated total reflection spectroscopy. Because of the diffusion of DDA from the solid particles into the liquid DGEBA matrix, curing produces a highly crosslinked amorphous matrix that contains low crosslinked amorphous regions. After full curing, the network possesses a relatively low molecular mobility and no residual reactive groups. Thermal and hydro‐thermal loading is performed at 60°C, well below the principal glass transition temperature (T_g1 = 171°C). Both aging regimes cause significant chemical and structural changes to the glassy epoxy. It undergoes a phase separation of relatively mobile segments inside the low mobile matrix, providing a second glass transition that shifts from T_g2 = 86–114°C within 108 days of aging. This phase separation is reversible on heating into the viscoelastic state. Hydro‐thermal aging leads to a reversible and a nonreversible plasticizing effect as well. On thermal aging, no chemical changes are observed but hydro‐thermal aging causes significant chemical modifications in the epoxy system. These modifications are identified as a partial degradation of crosslinks produced by the cyano groups of the DDA and correspond to the nonreversible plasticitation. These changes in the cured epoxy should exert an influence on the mechanical properties of an adhesive bond. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Smooth Loops from Unconstrained Video

Converting unconstrained video sequences into videos that loop seamlessly is an extremely challenging problem. In this work, we take the first steps towards automating this process by focusing on an important subclass of videos containing a single dominant foreground object. Our technique makes two novel contributions over previous work: first, we propose a correspondence‐based similarity metric to automatically identify a good transition point in the video where the appearance and dynamics of the foreground are most consistent. Second, we develop a technique that aligns both the foreground and background about this transition point using a combination of global camera path planning and patch‐based video morphing. We demonstrate that this allows us to create natural, compelling, loopy videos from a wide range of videos collected from the internet.     

Analytic center cutting plane method for multiple kernel learning

Multiple Kernel Learning (MKL) is a popular generalization of kernel methods which allows the practitioner to optimize over convex combinations of kernels. We observe that many recent MKL solutions can be cast in the framework of oracle based optimization, and show that they vary in terms of query point generation. The popularity of such methods is because the oracle can fortuitously be implemented as a support vector machine. Motivated by the success of centering approaches in interior point methods, we propose a new approach to optimize the MKL objective based on the analytic center cutting plane method (accpm). Our experimental results show that accpm outperforms state of the art in terms of rate of convergence and robustness. Further analysis sheds some light as to why MKL may not always improve classification accuracy over naive solutions.     

Additive Manufacturing of Hard Magnetic Passive Shims to Increase Field Homogeneity of a Halbach Magnet

Obtaining a highly homogeneous magnetic field is desired for field-controlled applications. For example, the resolution of magnetic analysis methods can be improved by generating a stronger and more homogeneous field over the region of interest (ROI). A set of 3D-printed passive shims is fabricated using additive manufacturing to improve the magnetic field homogeneity of a Halbach magnet assembly. The feedstock is a custom acrylonitrile butadiene styrene (ABS)-hard magnet composite filament filled with 60% wt. isotropic NdFeB. Additionally, a method for investigating the remanence is developed and validated. The result reveals a good agreement between the new method and existing measurement techniques for the remanence of permanent magnets. It is also shown that the additive manufacturing procedure has negligible effects on the magnetic properties. Performing a parametric study over a rectangular ROI, an optimized shim configuration is achieved. In the optimized and 3D-printed configuration, the average norm of the magnetic flux density, B_norm, is increased by 13% and, more importantly, a 43% increase in the magnetic uniformity is obtained. These results highlight the great potential of freeform manufacturing, namely, additive manufacturing, to tailor the properties of magnet structures.     

Certainty equivalence adaptation combined with super-twisting sliding-mode control

ABSTRACT

In this paper, a Lyapunov-based control concept is presented that combines variable structure and adaptive control. The considered system class consists of nonlinear single input systems which are affected by matched structured and unstructured uncertainties. Resorting to the certainty equivalence principle, the controller exploits advantages of both the sliding-mode and the adaptive control methodology. It is demonstrated that the gains of the discontinuous control action may be reduced remarkably when compared with pure sliding-mode-based approaches. The efficiency of the presented concept is demonstrated in detail, using results of numerical simulations.     

Australia's housing choices: Retrospect and prospect

This article identifies issues around the Auckland Region's strategy for urban intensification and discusses the ensuing policy implications. Medium density housing forms an important element of the strategy for growth management. Implications for its success are primarily drawn from research into a major housing development in Waitakere City. It is argued that for ideological, political and technical reasons the strategy could be easily undermined. The article also suggests that something of a paradigm shift is underway in urban planning.     

Dissolution,Transport and Reaction at a DICY/DGEBA Interface

The curing of an epoxy consisting of the solid hardener dicyandiamide (DICY) and the resin diglycidyl ether of bisphenol A (DGEBA) is studied in a system consisting of a tablet of DICY embedded in liquid DGEBA. Dissolution of DICY within the liquid DGEBA in combination with the transport of dissolved DICY from the tablet border into DGEBA and the chemical reaction of both reactants is studied by scanning Brillouin microscopy and infrared spectroscopy. Scanning Brillouin microscopy demonstrates the spatial and temporal evolution of the static and dynamic hypersonic properties in the course of curing in the vicinity of the DICY tablet. Infrared spectroscopy performed on epoxy pieces extracted from the final sample at different distances from the tablet surface give information about the spatial evolution of the curing process. The results achieved by both techniques are finally combined to yield a better understanding of the curing of DICY-based epoxies, which transform upon curing from strongly heterogeneous systems towards increasingly homogeneous systems.     

Tracking down some ancient baboons.

In this article the author recounts his search to find an original picture of an ancient Egyptian Sun Sanctuary nearby the temple Abu Simbel. The author learned that the sun sanctuary had been dismantled in 1915, the baboons transported to the Egyptian Museum in Cairo for safekeeping. Thus if he were to have a proper photograph of the baboons in their original setting, it would have to have been taken before 1915. After searching a seven volume index to every site in Egypt, Dr. Spanel reported that such a picture can be found in Gaston Maspero’s Rapports relatifs á la consolidation des temples, published in Cairo in 1911 by the Institut fran?ais d'archéologie orientale. So, it was not long after the author sent off his third request that an express envelope arrived from Egypt, with a fine copy of the photograph and a cover letter from the director, saying that he was sending it with his compliments and best wishes. (PsycINFO Database Record (c) 2011 APA, all rights reserved)