Nanofluids have been known as practical materials to ameliorate heat transfer within diverse industrial systems. The current work presents an empirical study on forced convection effects of Al2O3–water nanofluid within an annulus tube. A laminar flow regime has been considered to perform the experiment in high Reynolds number range using several concentrations of nanofluid. Also, the boundary conditions include a constant uniform heat flux applied on the outer shell and an adiabatic condition to the inner tube. Nanofluid particle is visualized with transmission electron microscopy to figure out the nanofluid particles. Additionally, the pressure drop is obtained by measuring the inlet and outlet pressure with respect to the ambient condition. The experimental results showed that adding nanoparticles to the base fluid will increase the heat transfer coefficient (HTC) and average Nusselt number. In addition, by increasing viscosity effects at maximum Reynolds number of 1140 and increasing nanofluid concentration from 1% to 4% (maximum performance at 4%), HTC increases by 18%. 相似文献
Over the last decade, application of soft computing techniques has rapidly grown up in different scientific fields, especially in rock mechanics. One of these cases relates to indirect assessment of uniaxial compressive strength (UCS) of rock samples with different artificial intelligent-based methods. In fact, the main advantage of such systems is to readily remove some difficulties arising in direct assessment of UCS, such as time-consuming and costly UCS test procedure. This study puts an effort to propose four accurate and practical predictive models of UCS using artificial neural network (ANN), hybrid ANN with imperialism competitive algorithm (ICA–ANN), hybrid ANN with artificial bee colony (ABC–ANN) and genetic programming (GP) approaches. To reach the aim of the current study, an experimental database containing a total of 71 data sets was set up by performing a number of laboratory tests on the rock samples collected from a tunnel site in Malaysia. To construct the desired predictive models of UCS based on training and test patterns, a combination of several rock characteristics with the most influence on UCS has been used as input parameters, i.e. porosity (n), Schmidt hammer rebound number (R), p-wave velocity (Vp) and point load strength index (Is(50)). To evaluate and compare the prediction precision of the developed models, a series of statistical indices, such as root mean squared error (RMSE), determination coefficient (R2) and variance account for (VAF) are utilized. Based on the simulation results and the measured indices, it was observed that the proposed GP model with the training and test RMSE values 0.0726 and 0.0691, respectively, gives better performance as compared to the other proposed models with values of (0.0740 and 0.0885), (0.0785 and 0.0742), and (0.0746 and 0.0771) for ANN, ICA–ANN and ABC–ANN, respectively. Moreover, a parametric analysis is accomplished on the proposed GP model to further verify its generalization capability. Hence, this GP-based model can be considered as a new applicable equation to accurately estimate the uniaxial compressive strength of granite block samples.
This paper deals with the presentation of polynomial time (approximation) algorithms for a variant of open‐shop scheduling, where the processing times are only machine‐dependent. This variant of scheduling is called proportionate scheduling and its applications are used in many real‐world environments. This paper develops three polynomial time algorithms for the problem. First, we present a polynomial time algorithm that solves the problem optimally if , where n and m denote the numbers of jobs and machines, respectively. If, on the other hand, , we develop a polynomial time approximation algorithm with a worst‐case performance ratio of that improves the bound existing for general open‐shops. Next, in the case of , we take into account the problem under consideration as a master problem and convert it into a simpler secondary approximation problem. Furthermore, we formulate both the master and secondary problems, and compare their complexity sizes. We finally present another polynomial time algorithm that provides optimal solution for a special case of the problem where . 相似文献
Neural Computing and Applications - This paper proposes a novel extreme learning machine (ELM)-based fixed time adaptive trajectory control for electronic throttle valve system with uncertain... 相似文献
In problem of portfolio selection, financial Decision Makers (DMs) explain objectives and investment purposes in the frame of multi-objective mathematic problems which are more consistent with decision making realities. At present, various methods have introduced to optimize such problems. One of the optimization methods is the Compromise Programming (CP) method. Considering increasing importance of investment in financial portfolios, we propose a new method, called Nadir Compromising Programming (NCP) by expanding a CP-based method for optimization of multi-objective problems. In order to illustrate NCP performance and operational capability, we implement a case study by selecting a portfolio with 35 stock indices of Iran stock market. Results of comparing the CP method and proposed method under the same conditions indicate that NCP method results are more consistent with DM purposes. 相似文献
In this paper, the problem of motion planning for parallel robots in the presence of static and dynamic obstacles has been investigated. The proposed algorithm can be regarded as a synergy of convex optimization with discrete optimization and receding horizon. This algorithm has several advantages, including absence of trapping in local optimums and a high computational speed. This problem has been fully analyzed for two three-DOF parallel robots, ie 3s-RPR parallel mechanism and the so-called Tripteron, while the shortest path is selected as the objective function. It should be noted that the first case study is a parallel mechanism with complex singularity loci expression from a convex optimization problem standpoint, while the second case is a parallel manipulator for which each limb has two links, an issue which increases the complexity of the optimization problem. Since some of the constraints are non-convex, two approaches are introduced in order to convexify them: (1) A McCormick-based relaxation merged with a branch-and-prune algorithm to prevent it from becoming too loose and (2) a first-order approximation which linearizes the non-convex quadratic constraints. The computational time for the approaches presented in this paper is considerably low, which will pave the way for online applications. 相似文献
Multi-Criteria Decision Aid (MCDA) or Multi-Criteria Decision Making (MCDM) methods have received much attention from researchers and practitioners in evaluating, assessing and ranking alternatives across diverse industries. Among numerous MCDA/MCDM methods developed to solve real-world decision problems, the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) continues to work satisfactorily across different application areas. In this paper, we conduct a state-of-the-art literature survey to taxonomize the research on TOPSIS applications and methodologies. The classification scheme for this review contains 266 scholarly papers from 103 journals since the year 2000, separated into nine application areas: (1) Supply Chain Management and Logistics, (2) Design, Engineering and Manufacturing Systems, (3) Business and Marketing Management, (4) Health, Safety and Environment Management, (5) Human Resources Management, (6) Energy Management, (7) Chemical Engineering, (8) Water Resources Management and (9) Other topics. Scholarly papers in the TOPSIS discipline are further interpreted based on (1) publication year, (2) publication journal, (3) authors’ nationality and (4) other methods combined or compared with TOPSIS. We end our review paper with recommendations for future research in TOPSIS decision-making that is both forward-looking and practically oriented. This paper provides useful insights into the TOPSIS method and suggests a framework for future attempts in this area for academic researchers and practitioners. 相似文献