废弃巷改造水仓沉淀池的应用实践

大尹格庄金矿1号矿体存在排水线路长,水中尾砂、胶结料和淤泥等阻塞淤积大巷水沟,深部生产供水线路长、高差大,闸阀损坏、爆管等问题,影响生产中段运输放矿;通过封堵-496一分段废弃工程建成平流式水仓沉淀池,解决了1号矿体供、排水问题,水仓工程量少、工艺简单、取得了良好的经济效益和社会效益.     

Feasibility study of large-scale mass customization 3D printing framework system with a case study on Nanjing Happy Valley East Gate

At present, the development and implementation of digital transformation are the keys to promoting high-quality industry development. The new digital fabrication method of robotic 3D printing is a research area being studied by many to tackle the issue of the declining productivity of traditional construction methods. Although many studies have been done, most of the current 3D printing projects are facing limitations in terms of scale. In order to bridge the gap, this article proposed a mass customization 3D printing framework system for large-scale projects. This article discusses how mass customization is made possible through the joint operation of the FUROBOT software and 3D printing hardware. By taking the east gate of Nanjing Happy Valley Plaza as a case study, the article demonstrates and studies the feasibility of the large-scale mass customization 3D printing framework system.     

Amination of biochar surface from watermelon peel for toxic chromium removal enhancement

Watermelon peel residues were used to produce a new biochar by dehydration method. The new biochar has undergone two methods of chemical modification and the effect of this chemical modification on its ability to adsorb Cr(VI) ions from aqueous solution has been investigated. Three biochars, Melon-B, Melon-BO-NH_2 and Melon-BO-TETA, were made from watermelon peel via dehydration with 50% sulfuric acid to give Melon-B followed by oxidation with ozone and amination using ammonium hydroxide to give Melon-BO-NH_2 or Triethylenetetramine(TETA) to give Melon-BO-TETA. The prepared biochars were characterized by BET, BJH,SEM, FT-IR, TGA, DSC and EDAX analyses. The highest removal percentage of Cr(VI) ions was 69% for Melon-B,98% for Melon-BO-NH_2 and 99% for Melon-BO-TETA biochars of 100 mg·L~(-1) Cr(VI) ions initial concentration and 1.0 g·L~(-1) adsorbents dose. The unmodified biochar(Melon-B) and modified biochars(Melon-BO-NH_2 and Melon-BO-TETA) had maximum adsorption capacities(Qm) of 72.46, 123.46, and 333.33 mg·g~(-1), respectively.The amination of biochar reduced the pore size of modified biochar, whereas the surface area was enhanced.The obtained data of isotherm models were tested using different error function equations. The Freundlich,Tempkin and Langmuir isotherm models were best fitted to the experimental data of Melon-B, Melon-BO-NH_2 and Melon-BO-TETA, respectively. The adsorption rate was primarily controlled by pseudo-second–order rate model. Conclusively, the functional groups interactions are important for adsorption mechanisms and expected to control the adsorption process. The adsorption for the Melon-B, Melon-BO-NH_2 and Melon-BO-TETA could be explained for acid–base interaction and hydrogen bonding interaction.     

浅谈中职学校《网络安全教育》的重要性

21世纪是网络的时代，随着互联网的迅速发展《网络安全教育》必然成为了中等职业院校安全教育的重要内容之一。     

球化组织对AISI 420型钢淬回火特性及耐蚀性能的影响

对比研究了两种AISI 420型钢球化组织的平均粒径和圆整度，并对两种钢材进行了不同淬火和回火处理工艺.然后通过硬度测试、扫描电子显微镜（SEM）和X射线衍射仪（XRD）来比较球化组织对淬回火特性的影响，同时借助动电位极化曲线测试和质量分数3.5% NaCl溶液浸泡腐蚀来分析耐蚀性能的差异.结果表明:细小弥散的球化组织在淬火时可以提高AISI 420型钢的C元素的固溶量，提高了其淬硬性，但是会提高残留奥氏体的含量；尺寸更小的退火态碳化物可以使AISI 420型钢的基体在奥氏体化过程中溶解更多的Cr元素，从而使得其在淬回火后基体Cr含量更高，减小贫Cr区产生几率，最终显示出更好的点蚀抗力；更少的大尺寸的未溶碳化物在腐蚀环境中降低了点蚀形核几率，提高了AISI 420型钢的耐蚀性能.所以在250℃回火时，AISI 420型钢耐蚀性好且硬度高，在480℃回火后，耐蚀性最差.      

供暖管线施工流程与质量标准分析

供暖管线不仅是建筑方面的问题同时也关系着国计民生,所以在建筑工程中必须要严格控制供暖管线的施工流程和质量标准。本文主要对供暖管线的施工流程以及质量标准进行分析。     

碳酸盐岩岩溶储层多井评价方法及地质应用

多井评价是建立在单井精细解释对比分析基础上的预测储层及含油气性平面分布规律的技术方法,而常规测井资料无法区分碳酸盐岩岩溶储层,因而利用多井评价结果确定岩溶发育程度在平面上的分布规律就显得十分重要。为此,在岩心标定成像测井的基础上,对四川盆地高石梯—磨溪地区15口井的成像测井岩溶发育特征进行分析,建立了中二叠统茅口组岩溶发育各分带的标准成像图版,利用交会图及直方图分析各分带的常规测井响应特征,在此基础上形成了电成像测井刻度常规测井识别岩溶发育带的新方法。研究结果表明:①高石梯—磨溪地区茅口组岩溶带自上而下可划分为风化壳残积带、垂直渗流岩溶带、水平潜流岩溶带以及受岩溶作用较弱的基岩;②风化壳残积带在成像测井图像显示为"暗—亮—暗"条带状模式,垂直渗流岩溶带为垂直线状与暗色斑状组合模式,水平潜流岩溶带为水平线状—层状与斑状组合模式,基岩整体显示为亮色块状模式偶见线状或斑状特征;③有效储层主要发育在垂直渗流带和水平潜流带的顶部;④该区茅口组岩溶发育主要受裂缝发育控制,而裂缝发育又与断层关系密切。结论认为,该新方法对碳酸盐岩岩溶储层的多井评价具有普遍适用性,为四川盆地中二叠统风险探井的部署提供了技术支撑。