排序方式: 共有95条查询结果,搜索用时 343 毫秒
1.
From the viewpoint of welding mechanics, two new welding methods-welding with trailing peening and welding with trailing impactive rolling were introduced. For aluminum alloy thin-shell structures with high strength, welding will lead to hot cracking, poor joint and distortion. In order to solve them, trailing impactive device was used behind welding torch to impact the different positions of welded joints, thus realizing the welding with free-hot cracking, low distortion and join tstrengthening. By use of impactive rolling wheels instead of peening heads, the outlook of welded specimen can be improved and stress concentration at weld toes can be reduced. Equipment of this technology is simple and portable. It can used to weld sheets, longitudinal and ring-like beams of tube-like structures, as well as the thin-shell structures with closed welds such as flanges and hatches. So the technology has the wide application foreground in the fields of aviation and aerospace. 相似文献
2.
3.
对铝合金超声-MIG焊接熔滴过渡行为做了系统研究。试验主要关注在超声作用下,铝合金焊接中熔滴过渡行为的变化。通过对熔滴过渡过程的观测和分析,结果表明,对于短路过渡形式,熔滴受到超声辐射力的阻碍作用,熔滴的体积增大,过渡频率降低,焊接电弧收缩,弧长缩短,挺度增加,亮度增大;在大滴过渡和射滴过渡时,熔滴过渡频率大幅增加,熔滴尺寸减小,这也是超声辐射力作用在熔滴上的影响造成的;而且超声作用后的熔滴形态发生复杂变化,焊接过程的不稳定性增大。 相似文献
4.
文中首先进行单道多层堆焊试验,得到不同厚度基板条件下的20层薄壁堆焊结构,发现薄壁结构都能在距基板7.30 mm高度以内进入熔宽稳定区域,且稳定后熔宽与基板厚度无关.结果表明,基板散热在不同高度的作用效果的不同是造成基板附近焊道熔宽产生变化的主要因素.采用三种策略对基板附近焊道熔宽进行调控并对结果进行方差分析,最佳调控策略可以使各基板条件下的方差都控制在0.24以内,其中6 mm板厚下可控制在0.02以内.根据参数调控曲线可知,基板对不同高度焊道熔宽的作用效果呈凹型曲线分布,且曲率随基板厚度的增加而增加. 相似文献
5.
在铝合金TIG焊接的过程中,超声能量处理熔池可以改善焊缝成形、组织与接头力学性能.文中研究了随焊超声施加方法对铝合金TIG焊缝成形的影响,结果表明,连续施加超声会导致熔池熔体飞溅,焊缝成形不佳;间断施加超声可以有效避免熔体飞溅,焊缝成形良好.随焊超声冲击及随焊滚动超声技术均可实现间断施加超声,结果表明,尽管随焊超声冲击使熔宽变小,但是低频冲击作用对TIG焊缝成形具有副作用,会减小熔深.而采用随焊滚动超声技术,可以有效避免低频机械冲击的不利影响,焊缝熔宽变小的同时熔深也增大. 相似文献
6.
提出了高频感应热丝TIG焊接新方法,焊丝加热温度和深度可控,加热速度快,能适应高速送丝要求.高频感应加热消除了常规热丝TIG焊旁路电流磁场引起的电弧偏吹现象.另外,由于该方法不需利用焊丝本身的电阻产热,所以适用于铝合金等低电阻率金属焊丝.根据感应线圈的电感和工作频率要求,设计制造了适用于Φ1.6 mm铝合金焊丝的高频感应加热线圈和套筒.利用热电偶测量了不同送丝速度下的焊丝温度.结果表明,当送丝速度高达6~10 m/min时,焊丝的温度完全能够满足热丝焊的要求.6~10 m/min的送丝速度较常规TIG焊接提高了3倍以上,大大提高了焊接效率. 相似文献
7.
8.
采用变极性和高频脉冲电路叠加,设计了一套变极性和高频脉冲复合电流输出特性的焊接电源,将高频脉冲电弧特性引入变极性焊接过程.建立电弧压力数学模型,结合具体工艺试验,分析了高频脉冲电流对于变极性焊接电弧特性的改善.结果表明,在相等电流有效值的情况下,电弧压力随脉冲频率的提高而增加,高频脉冲电流频率达到5kHz附近时,弧柱区电弧压力较常规直流电弧提高2倍左右,电弧的挺度和能量密度都有所增加,为进一步研究高频脉冲变极性焊接方法在铝合金焊接中的应用提供了理论依据. 相似文献
9.
10.
In this paper, the droplet transfer in oscillating arc narrow gap gas metal arc ( GMA ) welding was studied. According to the experimental results, the oscillating arc has effect on the droplet transfer mode. The droplet transfer frequency in narrow gap groove is higher than that in bead-on-plate welding. Because of the change of arc location in narrow gap groove, the droplet transfer in oscillating arc narrow gap changes regularly. The droplet transfer frequency near groove sidewall is higher than that at the middle of narrow gap groove. 相似文献