Dispersion-tolerant 10-gb/s duobinary system employing heterodyne detection and MLSE

We experimentally demonstrate a 10.7-Gb/s duobinary transmission system operating over a chromatic-dispersion range of /spl sim/12 000 ps/nm. Heterodyne detection and maximum-likelihood sequence estimation are employed to achieve this result.     

Review Processing, properties and applications of reactive silica from rice husk—an overview

Rice husk is an abundantly available waste material in all rice producing countries. In certain regions, it is sometimes used as a fuel for parboiling paddy in the rice mills. The partially burnt rice husk in turn contributes to more environmental pollution. There have been efforts not only to overcome this but also to find value addition to these wastes using them as secondary source of materials. Rice husk contains nearly 20% silica, which is present in hydrated amorphous form. On thermal treatment, the silica converts to crystobalite, which is a crystalline form of silica. However, under controlled burning conditions, amorphous silica with high reactivity, ultra fine size and large surface area is produced. This micro silica can be a source for preparing advanced materials like SiC, Si₃N₄, elemental Si and Mg₂Si. Due to the high pozzolanic activity, this rice husk silica also finds application in high strength concrete as a substitute for silica fume. Possibility of using this silica as filler in polymers is also studied. The present paper is an attempt to consolidate and critically analyse the research work carried out so far on the processing, properties and application of rice husk silica in various laboratories and also highlighting some results on the processing and characterization of RHA and reactive silica obtained from it in the authors' laboratory.     

Vestigial sideband filtering at 10 Gbit/s using 12.5 GHzchannel-spacing demux

A 32-channel 12.5 GHz-spaced free-space demux with low crosstalk and low polarisation dependent loss has been constructed. Using this demux, vestigial sideband filtering at 10 Gbit/s has been studied. It is shown that this demux can achieve very high spectral efficiency without polarisation division multiplexing     

Manual dexterity of older Mexican American adults: a cross-sectional pilot experimental investigation

This paper reports results from an experimental pilot study performed to quantify the manual dexterity of older Mexican American adults. The Purdue pegboard test, a two-arm coordination test, and a hand-tool dexterity test were used in this study. To enable cross-sectional comparisons of manual dexterity measures of older Mexican American adults with young Mexican American adults, these tests were administered to 18 older Mexican American adults aged 63–85 (mean age: 71.3 years, SD: 7.0 years), recruited from senior recreation centers in El Paso, and eighteen young adults aged 21–32 (mean age: 25.6 years, SD: 3.8 years) recruited from the student body at the University of Texas at El Paso. For the Purdue pegboard test, the number of pegs placed in 30 s using the preferred hand, the non-preferred hand, and both hands were first individually monitored. Then, scores on an assembly task using the Purdue pegboard were obtained. For the two-arm coordination test, participants were required to trace a star pattern with a stylus using both hands. The time for task completion and the number of errors made during task performance were monitored. For the hand-tool dexterity test, participants were required to use common hand tools and remove nuts and bolts from one side of a wooden upright, and to assemble nuts and bolts in the corresponding holes on the other side of the upright. The time taken for task completion was recorded. Since modified Levene's test showed equality of variances, two sample t-tests, comparing the mean responses of older adults with the mean responses of young adults for each individual test, were conducted. Results indicate that responses for the older adults were statistically significant different (p<0.001) from young adults for all Purdue pegboard tasks. On the average, older adults performed significantly slower (p<0.001) than young adults on the two-arm coordination test, and committed more errors before task completion (p<0.05). Older adults also took longer to complete the hand-tool dexterity task compared to their younger counterparts (p<0.05). In addition to the t-tests, manual dexterity performance measures from older adults were regressed with age to determine the cross-sectional age effects on manual dexterity measures. Results indicate that all Purdue pegboard performance measures were significantly affected by age (p<0.05). The time to complete the two-arm coordination test was significantly linearly related to age (p<0.05). However, the number of errors committed by older adults in the performance of the two-arm coordination test was not significantly linearly related to age. Time to complete the hand-tool dexterity was also significantly linearly related to age (p<0.05). Accommodating age-related changes in manual dexterity is important for job design in industry, especially in industries employing older adults requiring significant assembly and hand-tool use.

Relevance to industry

Given the aging of the industrial workforce, it is important to understand how manual dexterity is affected by age, so that jobs requiring significant manual dexterity for task initiation, task performance and task completion are designed to fit older adult dexterity levels.     

A 10 Gbit/s OEIC photoreceiver using InP/InGaAs heterojunction bipolar transistors

Metal organic molecular beam epitaxy (MOMBE) was successfully used for the first time to realise a high speed monolithic photoreceiver. Incorporating an InGaAs pin photodetector followed by a transimpedance preamplifier circuit implemented with InP/InGaAs heterojunction bipolar transistors (HBTs), the OEIC photoreceiver had a bandwidth of 6 GHz and a midband transimpedance of 350 Omega . In a system experiment performed at 10 Gbit/s, the receiver exhibited a sensitivity of -15.5 dBm for a bit error rate of 10/sup -9/ at a wavelength of 1.53 mu m. This is the first demonstration of operation of a long wavelength OEIC photoreceiver at this speed.<>     

Penalty interference of nonlinear intra-channel effects and PMD inultra high-speed TDM systems

Penalty interference of nonlinear propagation impairments and polarisation mode dispersion (PMD) caused signal distortions is experimentally investigated     

The influence of packaging materials on RF performance

At frequencies beyond 1 GHz, every component of the IC package contributes to the RF performance, whether required or not. In this work, we study the effects of packaging materials namely, the substrate and the globtop/underfill material on RF performance. We have measured interconnects on two area-array CSPs, the ball grid array and the polymer stud grid array using IMEC’s MCM-D technology. The measurements on the package interconnect show that the losses in the package substrate material account for about 50% of the total losses at 1.8 GHz and this drops to less than 20% at 5.2 GHz. The losses due to impedance mismatch dominate the losses especially below 10 GHz and considerable improvement in performance cannot be obtained by using an improved/expensive substrate. The other study is about the influence of globtop/underfill materials on wirebonds (through 3D EM simulations) as well as on standard 50 Ω MCM-D transmission lines (through experiments). While a higher value of dielectric constant of the globtop/underfill material is better on wirebonds, the influence of loss tangent is felt only above values of 0.1. The influence of seven different globtop/undefill materials on 50 Ω transmission lines has been used to extract their dielectric constant and loss tangent values at 30 GHz. These results are very valuable since one can hardly find the properties of globtop/underfill materials beyond 1 GHz.     

Novel optimized tree-based stack-type architecture for 2n-bit comparator at nanoscale with energy dissipation analysis

Comparator is an essential building block in many digital circuits such as biometric authentication, data sorting, and exponents comparison in floating-point architectures among others. Quantum-dot Cellular Automata (QCA) is a latest nanotechnology that overcomes the drawbacks of Complementary Metal Oxide Semiconductor (CMOS) technology. In this paper, novel area optimized 2n-bit comparator architecture is proposed. To achieve the objective, 1-bit stack-type and 4-bit tree-based stack-type (TB-ST) comparators are proposed using QCA. Then, two tree-based architectures of 4-bit comparators are arranged in two layers to optimize the number of quantum cells and area of an 8-bit comparator. Thus, this design can be extended to any 2n-bit comparator. Simulation results of 4-bit and 8-bit comparators using QCADesigner 2.0.3 show that there is a significant improvement in the number of quantum cells and area occupancy. The proposed TB-ST 8-bit comparator uses 2.5 clock cycles and 622 quantum cells with area occupancy of 0.49 µm² which is an improvement by 10.5% and 38%, respectively, compared to existing designs. Scaling it to a 32-bit comparator, the proposed architecture requires only 2675 quantum cells in an area of 2.05 µm² with a delay of 3.5 clock cycles, indicating 9.35% and 28.8% improvements, respectively, demonstrating the merit of the proposed architecture. Besides, energy dissipation analysis of the proposed TB-ST 8-bit comparator is simulated on QCADesigner-E tool, indicating average energy dissipation reduction of 17.3% compared to existing works.

     

Transistors made in laser recrystallized polysilicon on insulator films

lpcvd polycrystalline silicon films were deposited on thermally oxidized silicon as well as onlpcvd silicon nitride deposited on silicon. Acw argon ion laser was used to recrystallize the polysilicon film into large grains (grain size from 5μm to 40μm). Boron was then implanted and standard N-channel silicon gate process and N-channel metal gate process were carried out to realisemosfets on this material. Channel mobilities upto 450 cm²/V-sec for electrons have been measured. This thin filmmosfet has a four-terminal structure with a top and a bottom gate and the influence of one gate on the drain current due to the other gate has been investigated. Comparison of theI _D v-V _D curves of the devices with physical models was found in good agreement.