High-performance MIM capacitor using ALD high-k HfO/sub 2/-Al/sub 2/O/sub 3/ laminate dielectrics

For the first time, we successfully fabricated and demonstrated high performance metal-insulator-metal (MIM) capacitors with HfO/sub 2/-Al/sub 2/O/sub 3/ laminate dielectric using atomic layer deposition (ALD) technique. Our data indicates that the laminate MIM capacitor can provide high capacitance density of 12.8 fF//spl mu/m/sup 2/ from 10 kHz up to 20 GHz, very low leakage current of 3.2 /spl times/ 10/sup -8/ A/cm/sup 2/ at 3.3 V, small linear voltage coefficient of capacitance of 240 ppm/V together with quadratic one of 1830 ppm/V/sup 2/, temperature coefficient of capacitance of 182 ppm//spl deg/C, and high breakdown field of /spl sim/6 MV/cm as well as promising reliability. As a result, the HfO/sub 2/-Al/sub 2/O/sub 3/ laminate is a very promising candidate for next generation MIM capacitor for radio frequency and mixed signal integrated circuit applications.     

Holographic polymer‐dispersed liquid crystal fabrication under electric field

The transmission mode of holographic polymer‐dispersed liquid crystals (HPDLCs) was developed an under electric field. It is reported that orientation of LC molecules under an electric field induces orientation of oligomer molecules giving rise to low off‐state diffraction and small grating shrinkage. Copyright © 2005 Society of Chemical Industry     

Study of specific absorption rate (SAR) induced in two child head models and in adult heads using mobile phones

This paper gives a first comparison of specific absorption rate (SAR) induced in a child-sized (CS) head and an adult head using a dual-band mobile phone. In the second study, the visible human head is considered and comparison of SAR induced in a CS or child-like (CL) head and an adult head using a dual-band mobile phone is given. All the peaks of average SAR over a mass of 10 and 1 g in the head and the power budget are determined in the two comparisons using the finite-difference time-domain method. The differences between the results for adult and CS or CL heads are given at 900 and 1800 MHz. No important differences are noted for the peak SAR averaged over 10 g (SAR10 g), between the two adult head models, as well as between the two child head models. The peak SAR10 g in the brain of the CS or CL head is slightly more significant than that for the adult one.     

Total and Fractional Performance of Granular Dust Traps in Refractory Production

Methods are proposed for designing interpolation models for the preliminary determination and subsequent forecasting of general and fractional breakthrough coefficients for dust used with granular filters, as employed in energy-saving and high-performance dust trapping from technological gases and ventilation discharges in refractory production. The models are supplied with nomograms, which makes them widely suitable for experts working in environmental protection at refractory-producing organizations. The main factors are identified that influence the performance. The results are of interest to experts in related areas of industry such as building materials and engineering ceramics and so on. Translated from Novye Ogneupory, No. 4, pp. 64–67, April, 2008.     

新型复合弹簧的研究

提出一种金属圆锥弹簧与橡胶圆锥弹簧复合而成的弹簧．分析表明：它可以应用于弹性耦合激励振动筛和座式直线振动筛。     

Structural changes of PVC plastisols in progress of gelation and fusion as investigated with temperature-dependent viscoelasticity,morphology, and light scattering

The structural changes of poly(vinyl chloride) (PVC) plastisols during mixing of PVC with a plasticizer was investigated; as the temperature was increased, the system was found to transform from a suspension of solid particles in a liquid medium to a swollen gel and ultimately to a fused homogeneous matrix. The dynamic viscoelastic measurements were utilized to continuously monitor the changes of moduli under a controlled heating rate, employing a mechanical spectrometer. Characteristic changes in the viscoelastic behavior were associated with changes in particulate morphology as observed with a scanning electron microscope (SEM). Both viscoelastic and morphological observations were shown to provide details of structural changes in conjunction with the behavior of the PVC–plasticizer interaction, enabling a qualitative discrimination of the gelation and fusion processes. An in situ small-angle light-scattering (SALS) method was performed to make a quantitative estimate for the swollen particles of PVC while they were in the progress of gelation and fusion. From the manner of increase in correlation distances, along with the changes in viscoelastic moduli and morphology, the swelling behavior of the particulate structures were examined on the quantitative basis and brief insight into the complex behavior of the PVC–plasticizer interaction began to be unfolded. © 1995 John Wiley & Sons, Inc.     

Data management and analysis for high-throughput DNA sequencingprojects

The rapid advances in molecular biology have begun to shift many of the bottlenecks in genome research from the laboratory to the data analysis facility. The pace at which this has occurred creates a situation in which software development always has to catch up with the flow of data. Since such large-scale processes were not anticipated, the analysis infrastructure has not been fully established. Furthermore, most systems that have been built were designed by the biologists who collected the data. More recently, computer scientists, mathematicians, and engineers have taken an interest in this problem. This has had a positive effect, since it has created a tight synergy between the informatics and the biology. Several principles affected the design of the system developed at TIGR. Each of the sample preparation, sequencing, and analysis steps had to be managed, scheduled, and tracked. This information had to be made readily available to those who needed it for carrying out their tasks. Different skill levels of the users had to be taken into account. The degree of human intervention at each step had to be evaluated and built into the design. A mixed processing environment of Macintosh and Unix platforms had to be integrated. Most importantly, the system had to save time, reduce error, and ensure uniformity of the analysis and quality of the results. In the authors' experience, the tools they have built work well because of their early decisions as to which systems to use for development. The authors settled on a robust relational database management system (Sybase) and a portable development environment (C, C++)     

Structured genetic algorithm for robust H∞ controlsystems design

A structured genetic algorithm (SGA) approach is developed for robust controller design based on the concept of an H^∞ loop-shaping technique and the method of inequalities. Such an SGA is capable of simultaneously searching the orders and coefficients of the precompensator and postcompensator for the weighted plant. It is, therefore, not necessary to predefine the order of compensators as in usual practice. A multiple objective ranking approach is also incorporated so that the design criteria of extreme plants can be easily achieved. The effectiveness of such a technique is illustrated by a high-purity distillation column design example     

Genetic algorithms: concepts and applications [in engineeringdesign]

This paper introduces genetic algorithms (GA) as a complete entity, in which knowledge of this emerging technology can be integrated together to form the framework of a design tool for industrial engineers. An attempt has also been made to explain “why” and “when” GA should be used as an optimization tool