Preparation and characterization of mullite whisker reinforced ceramics made from coal fly ash

Ceramics with mullite whiskers were prepared from coal fly ash and Al₂O₃ raw materials, with AlF₃ used as an additive. The phase structures and microstructures of the ceramics were identified via X-ray diffraction and scanning electron microscopy, respectively. The results show that pickling of coal fly ash is an effective method for enhancing the flexural strength of ceramics. Sintering temperature and AlF₃ addition were also key factors influencing the creation of ideal ceramics. The ceramic made from pickled coal fly ash, 6?wt% AlF₃, and sintered at 1200?°C, exhibited the highest flexural strength of 59.1?MPa, and had a bulk density of 1.32?g/cm³ and porosity of 26.8%. The results show that ceramic materials made under these conditions are ideal candidates for manufacturing ceramic proppants for the exploitation of unconventional oil and gas resources.     

Preparation and Properties of a New Mediumdensity and High-strength Ceramic Proppant

Based on the needs of the market,a new 52 MPa medium-density and high-strength ceramic proppant was prepared by adopting third grade bauxite and clay as raw materials and using the solid phase sintering method,and the effect of the firing temperature on the microstructure,phase composition and mechanical properties of the ceramic proppant was studied. The broken resistance mechanism of this ceramic proppant was also discussed. The results show that the main phases of the prepared ceramic proppant are mullite and corundum; the broken rates are 3. 92% and 7. 21% under 52 MPa and69 MPa,respectively.     

葡萄栽培品种花芽高节位分化观察研究

在管理良好、植株健壮的条件下，葡萄花芽高节位分化是一个普遍的现象。一年生枝从低节位到高节位均可形成正常的花芽，并能正常开花结果，而且高节位分化花芽对当年的果实品质及次年的花芽分化无不良的影响。合理利用这一特性对促进葡萄幼树早丰产有重要的指导意义。     

节水是拉动经济效益增长的有效途径

本文简要介绍朔里煤矿抓节水的工作思路、工作方法和取得的节水经济效果，充分说明节水也是拉动经济增长的有效途径。     

纯棉中粗厚织物短流程前处理工艺

对纯棉中、粗、厚织物短流程前处理的工艺条件，处方及效果作了全面介绍。     

激光辐照40Cr钢组织结构的穆斯堡尔谱分析

４０Ｃｒ钢试样经不同热处理后在空气中用ＣＯ２连续激光束进行辐照，以穆斯堡尔谱学研究试样在辐照后的组织结构变化。试验结果表明，调质预处理后再进行激光辐照的试样，不仅残作产奥氏体含量较低，而且其中碳的含量最低。     

温度场下超长楼板中抗裂筋的定量分析

本文对超长结构楼板在温度场下的行为进行理论研究和计算分析，并推导简便可行的计算公式。为超长楼板抗裂筋设计提供定量的方法，可供相关专业技术人员参考。     

风雨操场综合楼改造工程设计与施工

某风雨操场综合楼改造工程拆除了辅助用房及支撑网架屋面的西根框架柱改造成为球场看台。设计采用钢结构桁架托换技术，将屋面荷载转移至两侧的保留柱上，跨度拓展到30m。钢桁架与框架柱上安装的牛腿铰接连接，通过牛腿背面框架柱间的混凝土墙平衡牛腿传来的弯矩。在施工安装过程中合理地利用待拆除框架柱，保持屋面的完整性提升屋面，达到了对屋面扰动影响最小的目的。     

洪水预报智能模型在中国半干旱半湿润区的应用对比

为探究不同洪水预报智能模型在我国半干旱半湿润区的应用效果,选用决策树、多层感知器、随机森林和支持向量机4种模型在陕西省3个典型流域进行逐时洪水预报;选择相关系数、纳什效率系数、均方根误差、平均绝对误差和相对误差等评价指标,比较不同预见期下4种模型在半干旱半湿润典型流域洪水预报的适用性。结果表明:在短预见期预报中,4种模型在半湿润区典型流域均可获得较高的预报结果,在半干旱典型流域模拟精度相对偏低,仅支持向量机模型满足预报要求;随着预见期延长,不同模型性能变化差异大,支持向量机模型整体稳定,在小流域实时洪水预报中具有明显优势;随机森林模型与决策树模型精度随预见期延长而缓慢下降,前者适应性更好;多层感知器模型精度随预见期延长而骤减,模型稳定性较差。     

柱[6]芳烃的合成及最新应用进展

柱芳烃作为一类新的大环芳烃主体化合物在主-客体化学中扮演着越来越重要的角色.作为柱芳烃家族中一员,柱[6]芳烃因其简便的合成、较大的柱状空腔和优秀的主-客体性质在吸附材料、药物传递、两亲性材料等领域展示了极好的应用前景.该文着重介绍了柱[6]芳烃的分子结构、合成策略、功能化、主-客体性质及其最新的应用研究进展.