Aluminum based reflective nanolens arrays to improve the effectiveness of ultraviolet inactivation of Escherichia coli O157:H7 and Listeria monocytogenes in water and a sucrose solution

Food Science and Biotechnology - Aluminum based reflective nanolens arrays were developed via a series of aluminum electropolishing and anodization steps with subsequent selective dissolution of...     

A novel temperature-tolerant foamed resin for enhanced oil recovery

The synthesis and performance of a novel temperature-tolerant foamed resin for enhanced oil recovery were investigated using various methods, including infrared, NMR, scanning electron microscopy (SEM), and displacement experiments. Polycondensation of furfuryl alcohol prepolymers was confirmed by the infrared and NMR results. The poor temperature tolerance of furfuryl alcohol prepolymers after gelation at high temperatures is mainly due to the fracture of furan rings. The addition of ester additives is an effective method of increasing the temperature tolerance of the prepared foamed resins and can effectively reduce the weight-loss rate of the polycondensation products. The SEM results show that the skeleton structure of the foamed resin remains intact after high-temperature treatment. Thus, the novel plugging agent system has excellent thermal stability and still has a high strength (>0.8 MPa) after high-temperature aging treatment for 40 days, giving the prepared foamed resin a good plugging performance (plugging rate > 91%) at 250 °C. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47161.     

Preparation and characterization of mullite whisker reinforced ceramics made from coal fly ash

Ceramics with mullite whiskers were prepared from coal fly ash and Al₂O₃ raw materials, with AlF₃ used as an additive. The phase structures and microstructures of the ceramics were identified via X-ray diffraction and scanning electron microscopy, respectively. The results show that pickling of coal fly ash is an effective method for enhancing the flexural strength of ceramics. Sintering temperature and AlF₃ addition were also key factors influencing the creation of ideal ceramics. The ceramic made from pickled coal fly ash, 6?wt% AlF₃, and sintered at 1200?°C, exhibited the highest flexural strength of 59.1?MPa, and had a bulk density of 1.32?g/cm³ and porosity of 26.8%. The results show that ceramic materials made under these conditions are ideal candidates for manufacturing ceramic proppants for the exploitation of unconventional oil and gas resources.     

SUBSCRIPTION 2018

正Four issues per volume a year,CHINA’S REFRACTORIES is distributed worldwide by airspeed delivery at no extra cost to subscribers.     

合成己二腈反应技术研究——(Ⅴ)己二腈工业反应过程模拟与反应器改造

对己二腈工业反应器提出了两釜串联带回流的模型,通过模拟计算得出模型的级间返混系数 f=6的结论。该模型能较好地预测工业反应器中物料组分浓度变化和气、液两相的流动特性;指出了现工业反应器的鼓泡中和段体积偏小是造成己二酸浓度偏高的关键;提出了可以通过增加串连一个鼓泡预反应段的改造方案,能有效地降低己二酸的浓度,从7%降至4%左右,从而能较好地减缓腐蚀和结焦。     

扇形段电磁搅拌对82B钢连铸坯成分和组织的影响

进行了结晶器搅拌和结晶器 +扇形段电磁搅拌连铸 82B钢 2 80mm× 380mm方坯的工业试验。结果表明 ,扇形段搅拌降低和改善了铸坯的中心偏析、疏松和夹杂物分布。 82B钢铸坯经扇形段搅拌后 ,中心部位碳含量峰值明显减小 ,碳偏析指数降低 5 7%～ 1 0 8% ,铸坯成分的方差值 (σ)减小 32 %～ 34 9%。     

掺钛蓝宝石激光晶体中夹杂物的分析

本文用大视场光学显微镜、电子探针观察和分析了掺钛蓝宝石激光晶体中夹杂物的形状、尺寸大小及元素组成，并提出消除和减少这些夹杂物的方法．     

军用滑木箱的设计分析

介绍了按日本标准设计的横板式和国内竖板式军用滑木箱的结构设计参数，从木箱抗弯、抗静压及顶盖抗弯三方面对比了两种木箱的力学性能，分析了两种木箱的特点及适用范围。     

MRF: A Framework for Source and Destination Based Bandwidth Differentiation Service

In this paper, we shall generalize the concepts of fairness, TCP-friendliness and TCP-compatibility such that more source adaptation schemes can be designed to support diverse applications over the Internet. A simple but efficient framework, in the form of a monotonic response function (MRF), is proposed for the analysis and the design of memoryless window-based source adaptation protocols by using these concepts. We first derive a necessary and sufficient condition for step-wise convergence to the weighted fairness. It is then used to construct increase-decrease policies. The requirements of our increase-decrease policy are less conservative than those of the CYRF (Choose Your Response Function) that was proposed in . Our MRF is suitable for transmission control protocol (TCP) and user datagram protocol (UDP), and can be used to design TCP-friendly and multimedia-friendly source adaptation schemes. Meanwhile, our MRF can be applied to provide bandwidth differentiation service without any change to the router of the existing Internet.     

BOPP薄膜生产中的功能母料

简述了BOPP薄膜生产过程中所需要的抗静电母料、防粘连母料和爽滑母料等功能母料，并分析了它们的作用、机理以及在生产中的应用特点。