Effect of 100 KeV Ar+ ion beam irradiation on ZnO thin films – Influence of morphology vis-a-vis electrode/electrolyte interface and its impact on photoelectrochemical water splitting

The present study attempts quantitative determination of changes in the morphological surface features viz. fractal dimension, lower and upper cut off length scale through Power Spectral Density analysis prior to and after irradiation of 100 KeV Ar⁺ ion beam at incidence angles of 0°, 40° and 60° on ZnO thin films. All the unirradiated and irradiated samples are subjected to photoelectrochemical characterization and a correlation between photoelectrochemical performance and morphological parameters is established. Sample irradiated at 40° angle at the fluence of 5 × 10¹⁶ ions/cm² is found to possess maximum fractal dimension of 2.72, lower and upper cut off length scale of 3.16 nm and 63.00 nm respectively. This sample exhibits maximum photocurrent density of 3.19 mA/cm² and applied bias photon-to-current efficiency of 1.12% at 1.23 V/RHE. Hydrogen gas collected for duration of 1 h for the same sample was ~4.83 mLcm^?2.     

Synthesis of poly(vinyl propionate) from poly(vinyl alcohol) in nonaqueous medium using ethyl nitrate dimethyl sulfoxide as a catalyst

Poly(vinyl alcohol) (PVA) can be dissolved in a nonaqueous medium in the presence of catalytic concentration of ethyl nitrate dimethyl sulfoxide, C₂H₅ONO₂·DMSO. From the PVA solution, poly(vinyl propionate), PVPR was prepared by the homogeneous esterification of PVA with propionic acid. The ester thus formed contained some unconverted hydroxyl group. The formation of the ester was confirmed by the IR and ¹H‐NMR spectra. The molecular weight of the ester was determined by GPC and intrinsic viscosity (η) was determined by viscometric method. Glass transition temperature, T_g, was obtained from differential scanning calorimetric (DSC) analysis. Thermal stabilities of the ester were checked by thermogravimetric analysis (TGA) and differential thermogravimetric (DTG) analysis. The efficiency of the ester as a flow improver of crude oil was also examined. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5675–5679, 2006     

Augmented photoelectrochemical response of CdS/ZnS quantum dots sensitized hematite photoelectrode

A visible light active and stable photoelectrode has been developed by depositing a passivating layer of ZnS QDs on CdS QDs sensitized hematite photoelectrode (Hematite‐CdS/ZnS) for PEC generation of hydrogen. Photoelectrochemical properties, in terms of stability and efficiency, have been investigated on the various hematite photoelectrodes sensitized with CdS QDs and CdS/ZnS QDs by varying number of SILAR cycles. I–V characteristics show that two layers of ZnS QDs deposited over three layers of CdS could enhance PEC response of hematite and efficiency by a factor of 3 and 11 respectively. Chronoamperometry measurement ensures that after adding a layer of ZnS QDs, CdS sensitized hematite film turns out to be a stable photoelectrode in the electrolyte. Prepared photoelectrodes have been characterized by XRD, SEM, HRTEM and UV–Vis spectrophotometer for various structural, morphological and optical properties to analyze PEC results. Mott–Schottky analysis and incident photon to current conversion efficiency (IPCE) measurements of sensitized hematite photoelectrode supported the improved PEC response of CdS/ZnS QDs sensitized hematite thin films. Copyright © 2016 John Wiley & Sons, Ltd.     

Structural modification of aminoclay for catalytic applications

Abstract

An eco-friendly catalyst system was synthesized using three step reaction. The Cu nanoparticles bridged aminoclay catalyst was analyzed using various analytical techniques. The structure of the catalyst was confirmed by FTIR and XRD. The synthesized catalyst system was used for the reduction of p-nitrophenol (NP), Cr(VI), and fluorescein (Flur) dye individually, as well as in their mixture forms. The k_app value was computed to access the efficiency of the catalyst. The results indicated that the k_app value of the individual system is higher than that of the mixture systems due to the absence of the complex formation reaction. The catalytic performance of the catalyst was also tested for the Schiff base (SB) formation between poly(ethyleneglycol) (PEG) and aniline (ANI) in an oxygen atmosphere. The ¹H-NMR spectroscopy result indicates that the present catalyst system produced 86% yield.     

Biocomposite based electrode for effective removal of Cr (VI) heavy metal via capacitive deionization

Abstract

This study focuses on the fabrication of biocomposite electrode and removal of Cr (VI) ions from wastewater using a capacitive deionization (CDI) method. The activated carbon (AC) was synthesized from Bael fruit shell (BS). The synthesized AC surface has a macroporous and mesoporous structure with the large specific surface area (617.72?m² g^?1) and high adsorption capacity. The cyclic voltammetry and CDI were performed for the detection and for the removal of chromium (VI) ions, respectively. The lower level of detection of Cr (VI) by a modified electrode was found to be 10 ppt. SEM, BET, and FTIR analyses were performed to explore the surface properties of electrode materials. The removal efficiency was achieved 100% by using biocomposite electrode with an applied potential of 15?V. The highest percent removal mechanism consists of electrosorption and electroreduction due to the affinity between polyvinyl alcohol modified electrode and Cr (VI) ions, under electrochemically faradic process.     

Nanostructured Zn-Fe2O3 thin film modified by Fe-TiO2 for photoelectrochemical generation of hydrogen

Nanostructured semiconductor thin films of Zn-Fe₂O₃ modified with underlying layer of Fe-TiO₂ have been synthesized and studied as photoelectrode in photoelectrochemical (PEC) cell for generation of hydrogen through water splitting. The Zn-Fe₂O₃ thin film photoelectrodes were designed for best performance by tailoring thickness of the Fe-TiO₂ film. A maximum photocurrent density of 748 μA/cm² at 0.95 V/SCE and solar to hydrogen conversion efficiency of 0.47% was observed for 0.89 μm thick modified photoelectrode in 1 M NaOH as electrolyte and under 1.5 AM solar simulator. To analyse the PEC results the films were characterized for various physical and semiconducting properties using XRD, SEM, EDX and UV–Visible spectrophotometer. Zn-Fe₂O₃ thin films modified with Fe-TiO₂ exhibited improved visible light absorption. A noticeable change in surface morphology of the modified Zn-Fe₂O₃ film was observed as compared to the pristine Zn-Fe₂O₃ film. Flatband potential values calculated from Mott–Schottky curves also supported the PEC response.     

Preclinical Anticancer Activity of DNA-based Cleavage Molecules

ABSTRACT

Deoxyribozymes (DNAzymes) are DNA residue-based molecules capable of specific cleavage of complementary mRNA. As such, they are more stable counterparts for the earlier discovered ribozymes. A handful of studies have shown the potential of DNAzymes against cancer both in cell culture and importantly in vivo models. This relatively new molecular entity may progress to clinical trials provided that more extensive testing is carried out at the preclinical stage. While a significant amount of work has gone into chemically stabilizing the molecule, delivery is one area that needs particular attention.     

Lattice Boltzmann Simulation of Two- and Three-Dimensional Incompressible Thermal Flows

This work is concerned with the application of the thermal lattice Boltzmann method (TLBM) to compute incompressible two- and three-dimensional flows in cavities. Two convection test cases, namely, the laminar flow in a differentially heated square cavity and a cubic cavity, are numerically analyzed through TLBM. The internal energy density distribution function approach with two three-dimensional particle velocity models, namely, the 15-velocity and the 19-velocity, and a two-dimensional model, namely, the nine-velocity, have been used in the present work. Computations are carried out for laminar flows in a differentially heated square cavity and a cubical cavity (Rayleigh numbers = 10³ to 10⁵). The boundary conditions used are stable and of good accuracy. To lend credibility to the thermal lattice Boltzmann model square cavity results, they are further compared with those obtained from a finite-difference-based code developed for this purpose.     

Excess Molar Volumes and Viscosities of Mixtures of Diethylene Glycol Dibutyl Ether with Dialkyl Carbonates at 298.15, 308.15, and 318.15 K

Excess molar volumes,V ^E _m, and viscosities,, were measured as a function of composition for the binary mixtures of diethylene glycol dibutyl ether+dimethyl carbonate, +diethyl carbonate, and +propylene carbonate at temperatures of 298.15, 308.15, and 318.15 K and atmospheric pressure over the whole range of mixture compositions. From the experimental results, deviations in the viscosity,ln, and excess free energies of activation of viscous flow,G*^E, were calculated. The experimental results were correlated using the Redlich–Kister equation. The experimental and calculated quantities were used to analyze the mixing behavior of the components. Furthermore, activation enthalpies,H*, and entropies,S*, of viscous flow were evaluated and their variation with concentration is discussed.     

Phosphotungstic Acid: An Efficient Catalyst for the Aqueous Phase Synthesis of Bis-(4-hydroxycoumarin-3-yl)methanes

In this present work, we report that phosphotungstic acid provides a simple, efficient and environmentally benign route is a two-component one-pot domino Knoevenagel-type condensation/Michael reaction between 4-coumarin derivative and an aldehyde in water as a solvent in shorter duration with high yields.