Analysis of a centered-inclined waveguide slot coupler

Integral equations are developed for a centered-inclined coupling slot (including the effect of finite wall-thickness of the common broad-wall) and the slot-aperture electric intensity field is found using the method of moments. Numerical results for resonant length, backscattered wave amplitude, and phase variation off-resonance are presented over a range of values of the waveguide b dimension, wall thickness, slot width, and frequency. It is shown that the resonant length is relatively insensitive to slot tilt, &thetas;, for a standard-height X-band waveguide, whereas its dependence on &thetas; is significant for reduced-height waveguides. The phase variation of scattered TE₁₀ waves in both waveguides off-resonance is less for wider slots and smaller b dimensions. Shunt-series coupling slots exhibit greater phase variation off resonance when compared to a centred-inclined coupling slot. Also, the former has a longer resonant length for a smaller b dimension and for a wider slot. Thus the centred-inclined slot coupler possesses superior characteristics. The higher-order mode coupling between a centred-inclined slot coupler and a pair of straddling radiating slots in the branch waveguide is significant     

Two structural adaptations for regulating transmitter release at lobster neuromuscular synapses

The distal accessory flexor muscle (DAFM) in the lobster (Homarus americanus) walking leg consists of 5 muscle fiber bundles. All five bundles, one proximal, one distal, and 3 medial, are innervated by one excitatory and one inhibitory motor neuron. Both neurons release more transmitter on the distal bundle than on the proximal bundle. The aim of our studies was to investigate the structural basis of this differentiation. Thin sections cut at 50 microns intervals showed a similar number of excitatory synapses on the two bundles. Freeze-fracture views of excitatory synapses showed that synapse size, active zone number per synapse, and intramembrane particle density in the postsynaptic membrane are similar proximally and distally. Active zones at synapses on the distal bundle are larger and contain about 50% more large intramembrane particles, which are thought to include the voltage-gated Ca2+ channels that couple the action potential to transmitter release, than their counterparts on the most proximal bundle. This difference in channel number appears to produce a disproportionate increase in the probability of transmitter release sufficient to account for most of the proximal-distal disparity in the amplitude of the excitatory postsynaptic potential. In contrast, staining the inhibitor for antibodies to the inhibitory neurotransmitter, GABA, showed that it forms more varicosities on the distal bundle than on the proximal bundle. Because most of the synapses are located in the varicosities, differences in synapse number likely regulate the proximal-distal disparity in the amount of inhibitory transmitter released. Therefore, the regional differentiation in the amount of transmitter released in the DAFM appears to be based on two distinct mechanisms. In the inhibitor, transmitter release appears to be regulated differentially by differences in synapse number. In the excitor, transmitter release appears to be regulated differentially from a similar number of synapses by differences in active zone structure.     

Catalytic Materials for High-Temperature Combustion

Catalytic combustion, as an alternative to conventional thermal combustion, has received considerable attention during the past decade. Research efforts have been promoted by the need to meet governmental demands concerning pollution and the wish to use energy sources more efficiently. The two main advantages offered by catalytic combustors over flame combustors apply to these goals:

1. Catalytic combustion can be carried out over a wide range of fuel concentrations in air and at low temperatures.
2. These low temperatures result in attaining NO, emission levels substantially lower than possible with conventional combustors.

     

Yield optimization for complex reactor systems

For complex reactions, the choice of reactor type is important for attaining optimum product yields. Strategies for specifying reactor types have beenIn this paper, product yield in a Van de Vusse reaction scheme has been studied for a wide range of the rate constants, in a reactor system consisting     

Comparative Study of the Different Variants of the DV-Hop Based Node Localization Algorithms for Wireless Sensor Networks

Wireless Personal Communications - Node localization is one of the essential services where sensor nodes in the wireless sensor network collaborate to provide location information of sensor nodes...     

Implementation of VLSI on Signal Processing-Based Digital Architecture Using AES Algorithm

Continuous improvements in very-large-scale integration (VLSI) technology and design software have significantly broadened the scope of digital signal processing (DSP) applications. The use of application-specific integrated circuits (ASICs) and programmable digital signal processors for many DSP applications have changed, even though new system implementations based on reconfigurable computing are becoming more complex. Adaptable platforms that combine hardware and software programmability efficiency are rapidly maturing with discrete wavelet transformation (DWT) and sophisticated computerized design techniques, which are much needed in today’s modern world. New research and commercial efforts to sustain power optimization, cost savings, and improved runtime effectiveness have been initiated as initial reconfigurable technologies have emerged. Hence, in this paper, it is proposed that the DWT method can be implemented on a field-programmable gate array in a digital architecture (FPGA-DA). We examined the effects of quantization on DWT performance in classification problems to demonstrate its reliability concerning fixed-point math implementations. The Advanced Encryption Standard (AES) algorithm for DWT learning used in this architecture is less responsive to resampling errors than the previously proposed solution in the literature using the artificial neural networks (ANN) method. By reducing hardware area by 57%, the proposed system has a higher throughput rate of 88.72%, reliability analysis of 95.5% compared to the other standard methods.     

Preparation of anchored ceramic coatings on metal substrates: a modified sol-gel technique using colloidal silica sol

A single-step dip-coating technique was developed to produce stable films or washcoats of controlled thickness, surface area and pore-size distribution on alumina whisker-covered metal substrates (both flat plates and monoliths). Dip-coating slurries were prepared by dispersing fine porous powder in a colloidal silica sol. The method provided control over coating thickness and coating properties, such as pore-size distribution and surface area. The coating thickness could be varied between approximately 2 and 40 m by selecting slurry composition and withdrawal speed in the dipping procedure. The pore-size distribution and surface area could be varied by changing type and amount of porous filler material in the dipping slurry. Uniform and bimodal pore-size distributions were obtained using silica and ZSM-5 molecular sieves, respectively, yielding coatings with surface areas between 60 and 400 m²g^–1.