基于信息的智能控制理论研究

本文介绍的基于信息的智能控制理论的发展过程，主要分为智能控制的信息指标和智能控制的信息结构分析两部分，文中在最后对这套理论可能的发展方向进行了探讨。     

基于DOCSIS标准的HFC数据加密算法的分析

基于DOCSIS标准的增强型基线保密性接口（BPI＋）采用56bit DES加密分组数据，采用二密钥三重DES加密通信量加密密钥。这种多重加密技术的应用为HFC网络的数据传输提供了相当于或更好于专线级的网络安全与加密性能。     

超低密度硬胶极压型油包水乳化钻井液在广安002-H9井的应用

在超低密度钻井液的使用方面，传统的油基钻井液和油包水钻井液存在易着火、安全性差的问题，而最近使用的美国3M公司的中空玻璃微珠聚磺钻井液又存在固控困难、钻井液费用很高等难题。为此，从选择合适的润湿反转剂和阻燃剂入手，在室内对获得的超低密度硬胶极压型油包水乳化钻井液成果配方进行了全面评价，并应用在广安002 H9井水平段欠平衡钻井中取得了良好效果。室内研究与现场应用表明，超低密度硬胶极压型油包水乳化钻井液能够很好地满足广安构造水平井段欠平衡钻井的需要。该钻井液体系具有防塌、润滑、携砂能力强，密度容易控制，钻井液单位成本合理并可重复使用，安全性好等显著特点，适合在类似广安构造的水平井段中推广应用。     

"橄榄型"社会阶层结构范式论

拥有一个"橄榄型"社会阶层结构,社会就会减少动荡,保持社会的相对稳定与和谐.现阶段培育"橄榄型"的社会阶层结构,是构建社会主义和谐社会的重要基础.     

SU-8 3D microoptic components fabricated by inclined UV lithography in water

Out-of-plane microlenses and microoptical fiber holder are two of the most important components for building an integrated microoptic system with a precise alignment accuracy. In this paper, a simple and convenient method to fabricate these components from SU-8 by using inclined UV lithography in water is proposed. It consists of two perpendicular exposures in SU-8 at ±45°. DI water possesses a low absorption coefficient and a moderate and stable value of refractive index in near UV. Using water, the exposure angle in SU-8 can be increased to 50° from 35° in air necessary to pattern the desired 45° slope of the sidewalls. The principle of the proposed technique and the detailed fabrication process of the microoptic components will be presented. The integratability of the fabricated components was demonstrated by the fabrication of the microoptical fiber holder with a pre-aligned out-of-plane microlens.     

Local residence time,residence revolution,and residence volume distributions in twin‐screw extruders

This work was aimed at studying the overall, partial, and local residence time distributions (RTD); overall, partial and local residence revolution distributions (RRD) and overall, partial and local residence volume distributions (RVD) in a co‐rotating twin screw extruder, on the one hand; and establishing the relationships among them, on the other hand. Emphasis was placed on the effects of the type and geometry of mixing elements (a gear block and various types of kneading elements differing in staggering angle) and process parameters on the RTD, RRD and RVD. The overall and partial RTD were directly measured in‐line during the extrusion process and the local ones were calculated by deconvolution based on a statistical theory. The local RTD allowed comparing the mixing performance of mixing elements. Also it was confirmed both experimentally and theoretically that specific throughput, defined as a ratio of throughput (Q) over screw speed (N), controlled all the above three types of residence distributions, be they local, partial or overall. The RRD and RVD do not provide more information on an extrusion process than the corresponding RTD. Rather they are different ways of representing the same phenomena. POLYM. ENG. SCI., 48:19–28, 2008. © 2007 Society of Plastics Engineers     

Hydrothermal Reaction Mechanism and Pathway for the Formation of K2Ti6O13 Nanowires

Calculations and detailed first principle and thermodynamic analyses have been performed to understand the formation mechanism of K₂Ti₆O₁₃ nanowires (NWs) by a hydrothermal reaction between bulk Na₂Ti₃O₇ crystals and a KOH solution. It is found that direct ion exchange between K⁺ and Na⁺ plus H⁺ interactions with [TiO₆] octahedra in Na₂Ti₃O₇ promote the formation of an intermediate H₂K₂Ti₆O₁₄ phase. The large lattice mismatch between this intermediate phase and the bulk Na₂Ti₃O₇ structure, and the large energy reduction associated with the formation of this intermediate phase, drive the splitting of the bulk crystal into H₂K₂Ti₆O₁₄ NWs. However, these NWs are not stable because of large [TiO₆] octahedra distortion and are subject to a dehydration process, which results in uniform K₂Ti₆O₁₃ NWs with narrowly distributed diameters of around 10 nm.     

SQL性能优化——表连接的分析

介绍两个表连接的几种常用方式和不同方式的内部机制.在比较3种不同表连接方式的优缺点基础上,选择一种好的方式来优化表连接,以提高查询速度,并结合中国邮政报刊发行系统数据库开发中遇到的生产实际,分析3种表连接方式的优劣.