Flux Jumps and H-T Diagram of Instability for MgB2

We present a study of magneto-thermal instabilities in polycrystalline MgB₂ superconductor, by magnetic hysteresis loop measurements and by investigations of magnetic flux dynamics with a miniature Hall probe. Temperature and magnetic field ranges where the flux jumps may be observed have been determined. On the basis of measurements of the magnetic flux dynamics, an average magnetic diffusivity describing the process of the flux jump is estimated. This parameter is compared with the thermal and magnetic diffusivities calculated on the basis of available data for thermal conductivity, heat capacity and resistivity. It is shown that the estimated value of the field of the first flux jump is influenced significantly by the field dependence of specific heat. In order to explain the observed phenomenon, the temperature reached by the sample during the flux jump at different magnetic fields is calculated.     

Diffusion with simultaneous immobilization in polymer–dye systems. I. Diffusion of the cationic dye anilana red BL in the anionically modified polyester fiber dilana

The diffusion coefficient of the cationic dye Anilana Red BL in the anionically modified polyester fiber Dilana has been calculated regarding a general diffusion-immobilization model. In the model the mobile species are distinguished from the immobilized ones. In computations of Sand's equation and experimentally determined sorption isotherm of the dye in the fiber, the rate-of-dyeing curve and the concentration profiles of the dye in the same fiber were employed. The diffusion coefficient of the mobile species of Anilana Red BL in the fiber is two orders of magnitude higher than the average diffusion coefficient obtained from Hill's equation and the apparent diffusion coefficient calculated by the Boltzmann–Matano method.     

Bioactive compounds in rye flours with different extraction rates

Rye flours with extraction rate of 100% (wholemeal flour), 95% (brown flour), 90% (brown flour) and 70% (light flour) were prepared in order to study the relation between flour extraction rates and content of bioactive compounds. The following compounds were analysed: total phenolic compounds (TPC), total flavonoids (TF), inositol hexaphosphate (IP6), reduced (GSH) and oxidized (GSSG) glutathione, tocopherols (T) and tocotrienols (T3). The reduced/oxidized glutathione status (GSH/GSSG) of the flours was examined as a potential index of flour resistance against oxidative stress. The following observations were made in relation to the flour extraction rates and bioactive compounds contents: (a) milling process caused decrease in content in TPC, TF, IP6, GSH and GSSG, T and T3, (b) the most resistant against oxidation processes were suggested a brown flours, then light and finally wholemeal flour, (c) the ratio of tocotrienols to tocopherols (T3/T) was the highest in rye flours with extraction rate of 100–90% whereas light flour was the poorest source of tocopherols and tocotrienols. The provided data support current trend to increase number of rye products from wholemeal or brown flours.     

Studies of porous polymer gels. I. One-step suspension technique for preparation of moderately crosslinked methacrylic acid gels

A new method of preparation of carboxyl cation exchangers directly from methacrylic acid and divinylbenzene is described. A suspension technique with a concentrated aqueous calcium chloride solution as the water phase was used. n-Octane and toluene were inert diluents of the monomers. The copolymers obtained have high ion-exchange capacity (9.6–10.6 mequ./g) and porous structure.     

Predicting Occupational Coping Responses: The Interactive Effect of Gender and Work Stressor Context.

This study examined whether gender and work stressor context interacted to affect reports of occupational coping strategies. Participants (N=113) were asked to indicate how they would cope with both self-focused (i.e., solitary) and interpersonal (i.e., group) work overload contexts by providing responses to the Cybernetic Coping Scale (J. Edwards & A. J. Baglioni, 1993). Consistent with the hypothesized interaction, male and female participants evidenced similar coping strategies in the self-focused work overload context, whereas female participants showed significantly higher use of coping (T2=.08, p     

An alternative formulation of the geometric stiffness matrix for plate elements

A simplified formulation of the geometric stiffness matrix for plate elements is presented. In this formulation the transverse displacement is defined along the element boundary but not for the element interior as with the usual formulation. As such the formulation is particularly suitable for use with hybrid stress or discrete Kirchhoff methods which are also based on boundary approximation of the transverse displacement.

The simplicity, computational economy and accuracy obtained with the formulation compare favorably with the usual order formulation.     

Tracking Changes in the Spring Barley Gene Pool in Poland during 120 Years of Breeding

This study was undertaken to investigate the diversity and population structure of 83 spring barley (Hordeum vulgare L.) cultivars, which corresponded to 120 years of this crop’s breeding in Poland. The analysis was based on 11,655 DArTseq-derived SNPs evenly distributed across seven barley chromosomes. Five groups were assigned in the studied cultivars according to the period of their breeding. A decrease in observed heterozygosity within the groups was noted along with the progress in breeding, with a simultaneous increase in the inbreeding coefficient value. As a result of breeding, some of the unique allelic variation present in old cultivars was lost, but crosses with foreign materials also provided new alleles to the barley gene pool. It is important to mention that the above changes affected different chromosomes to varying degrees. The internal variability of the cultivars ranged from 0.011 to 0.236. Internal uniformity was lowest among the oldest cultivars, although some highly homogeneous ones were found among them. This is probably an effect of genetic drift or selection during their multiplications and regenerations in the period from breeding to the time of analysis. The population genetic structure of the studied group of cultivars appears to be quite complex. It was shown that their genetic makeup consists of as many as eleven distinct gene pools. The analysis also showed traces of directed selection on chromosomes 3H and 5H. Detailed data analysis confirmed the presence of duplicates for 11 cultivars. The performed research will allow both improvement of the management of barley genetic resources in the gene bank and the reuse of this rich and forgotten variability in breeding programs and research.     

Early Stages of Recrystallization in Equal-Channel Angular Pressing (ECAP)-Deformed AA3104 Alloy Investigated Using Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) Orientation Mappings

Early stages of recrystallization in alloys containing complex structure of second phase particles are of considerable practical interest. They were observed for the AA3104 alloy in which large particles occur against the background of randomly distributed dispersoids. The samples were deformed by equal channel angular pressing and then slightly annealed to obtain the state of partial recrystallization. The highly deformed alloy contained a structure of flat grains with the spacing between high-angle grain boundaries ranging from 100 nm to 1 ??m. On annealing, the structure coarsened and got transformed into nearly equiaxed grains by both discontinuous and continuous recrystallization. The nucleation of new grains was observed in statically recrystallized bulk samples using scanning electron microscopy, and during in-situ recrystallization in a transmission electron microscope. Special attention was paid to the nucleation of new grains in areas close to large second phase particles, where a relatively high stored energy was expected to stimulate nucleation. A particular role in the rise of nuclei is attributed to migration of low angle boundaries. During recrystallization at 623 K (350?°C), in most of the observed cases, the growth of grains occurred by coalescence of neighbouring cells and by migration of high-angle grain boundaries. These processes led to nearly equiaxed grains of similar size. Orientation mappings showed that although orientations of new grains were widely scattered, they were not completely random.     

Elaboration of small‐diameter vascular prostheses—Selection of appropriate sterilisation method

The aim of study is the elaboration of semi‐biodegradable, multilayered tubular structures as substitutes for the reconstruction of small diameter vascular prostheses (<6 mm). The inert external layer of the prostheses will be fabricated via the melt electrospinning of poly (l ‐lactide‐co‐glycolide) (PLGA). The middle layer will be constructed from polypropylene (PP); the first prototype will be produced via melt electrospinning and the second using the melt blowing technique. The general aim of this stage of the research is the selection of a sterilisation technique that is appropriate for semi‐biodegradable, multilayered tubular structures. For this purpose, single tubular structures created via the melt electrospinning of PLGA or PP and melt blown tubular structures of PP were elaborated. The influence of steam, ethylene‐oxide (EO), and radiation sterilisation techniques on the elaborated microstructure of tubular structures was analyzed during this study. The effect of each sterilisation technique was evaluated using differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy/energy‐dispersive X‐ray spectroscopy analysis (SEM/EDS). The changes in average molecular weight (M_w) and crystallinity index (CI) of the PLGA tubular structures after EO and steam sterilisation were evaluated. The EO and steam sterilisation resulted in the complete destruction of PLGA tubular structures. Only the radiation sterilisation (accelerated electrons) did not influence on PLGA tubular structures morphology as well as thermal and chemical properties. FTIR and SEM/EDS analysis indicated that no changes in the chemical properties of PP tubular structures after each sterilisation occurred. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40812.     

Small diameter tubular structure design using solvent‐free textile techniques

The aim of research was to elaborate the non‐biodegradable (made of polypropylene (PP)) and resorbable (made of polylactide (PLA)) tubular fibrous structures for the reconstruction of the vascular vessels. For the mentioned structures design, nonconventional manufacturing techniques such as melt blown, melt electrospinning, and melt electroblowing were used. Three techniques were chosen as methods allowing on the fibrous structures manufacture containing fibers in nano‐ or submicro‐size diameter. Other advantages of free‐solvent technique use is the reduction in the clinical adverse events associated with solvent resided in the fibrous structure during the fabrication. The tubular fibrous structures of PP and PLA using above‐mentioned techniques were designed. In first stage, the analysis of the processing parameters influence on the nonbiodegradable and biodegradable tubular structures fiber diameter was performed. Subsequently, the validation step was the analysis of the influence of processing parameters on PP and PLA structural properties for each manufacturing techniques was investigated. The research results confirmed the ability of the tubular structures manufacture with various fiber diameter depending on the applied technique and processing parameters. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40147.