Structure and Nonlinear Optical Properties of Lanthanide Borate Glasses

The third–order nonlinear optical susceptibility, χ⁽³⁾, of lanthanide (lanthanum, praseodymium, neodymium, and samarium) borate glasses has been measured by the third harmonic generation method. The structure of the present glass system has been studied by infrared and Raman spectroscopic methods. The network structures of the present Ln₂O₃–B₂O₃ glasses have been confirmed to be basically similar to each other. Praseodymium, neodymium, and samarium borate glasses exhibit χ⁽³⁾ values that are larger than lanthanum borate glasses, because of the optical resonance effect, in accordance with the f – f transition. Especially, the χ⁽³⁾ value for 30Pr₂O₃·70B₂O₃ glass is 1.8 × 10⁻¹² esu, which is a factor of ∼60 larger than that of SiO₂ glass. This striking enhancement of χ⁽³⁾ is mainly attributed to the large transition moment to the first excitation state.     

Ozone Generator with Cylindrical Type of Rotating Electrode

An ozone generator using a rotating electrode to improve ozone generation efficiency is proposed. The ozone generator electrode unit consists of a rotating electrode and fixed electrode. The rotating electrode has the grounded 36 pieces of tungsten wires fixed in parallel to the rotation axis on the rotating cylinder surface. A dielectric electrode is used as a fixed electrode located on the inside of the tube of the electrode unit. The width of the apparent discharge gap is 1mm. Alternating current with a frequency of 50 Hz is applied to the electrode unit. The rotation speed can be adjusted from 0 rpm to 1200 rpm by a variable speed motor. Oxygen gas is used as the material gas. Higher ozone concentration and higher ozone generation efficiency are obtained compared with that when the rotation speed is 0 rpm. The gas temperature is measured at the inlet and outlet of the ozone generator, and the rotation speed for the cooling effect is most effective at about 500 rpm. The maximum generation efficiency is estimated to be 61 g/kWh at 800 rpm, and this value is twice as large as in the case of 0 rpm.     

Theoretical analysis of the spatial phase-matching loci for second-harmonic generation and multiwave-mixing interactions

We report a theoretical analysis on spatial noncolinear phase matching of multiwave mixing and its application to a second-harmonic-generation (SHG) experiment. From the numeric calculations, the noncolinear phase-matching properties in general situations were determined. The theory gives the applicability for all noncolinear phase matching. Fine coincidences between theoretical calculations and observed spatial loci on noncollinear phase-matching SHG were confirmed. Relations that allow the calculation of the noncollinear phase-matching angle for any case of SHG are established. As an example, the noncolinear phase-matched SHG pattern on a screen is calculated numerically in the case of SHG of 1064 nm from a Nd:YAG laser under the phase-matched condition for two organic nonlinear crystals: 1-(2-thienyl)-3-(4-methyphenyl) propene-1 (TC-28), which is biaxial, and (2-furyl) methacrylic anhydride (FMA), which is uniaxial. Experimental results compared quite favorably with the theoretical analysis. Noncolinear phase matching may be of great practical interest in optical multiwave-mixing processes, such as optical parametric oscillation and optical parametric amplification. This technique also can be used for the measurement of crystal optical constants.     

Formation of Zirconia Solid Solutions Containing Alumina Prepared by New Preparation Method

In the system ZrO₂–Al₂O₃, a new method for preparing ZrO₂ solid solutions from ZrCl₄ and AlCl₃ using hydrazine monohydrate is investigated. c -ZrO₂ solid solutions containing up to ∼40 mol% Al₂O₃ crystallize at low temperatures from amorphous materials. The formation mechanism is discussed from IR spectral data. The values of the lattice parameter α increase linearly from 0.5072 to 0.5105 nm with increasing Al₂O₃ content. At higher temperatures, transformation of the solid solutions proceeds as follows: c ( SS ) → t ( ss ) → t ( ss ) +α-Al₂O₃→ m +α-Al₂O₃. m -ZrO₂–α-Al₂O₃ composite ceramics are fabricated by hot isostatic pressing for 2 h at 1250°C and 196 MPa. Microstructures and mechanical properties are examined, in connection with increasing Al₂O₃ content.     

Evaluation of standing‐sitting support system with passive rotational seat mechanism in standing motion

Since a decrease in muscle mass of elderly people, the physical burden of them in standing‐sitting motion of a seat are increasing than young people. For this problem, several standing‐sitting support systems have been developed, and evaluations of these systems focusing on a reduction of physical load have been discussed. However, these evaluations are of support systems with an active actuators or of support systems when they use a handrail and a standing aid. Thus, an evaluation of a support system with only passive actuators has not been reported. In this paper, in standing motion with using a standing‐sitting support system with passive rotational seat mechanism which our group proposes, we objectively evaluate an effectiveness of the passive rotational seat mechanism by statistical analysis.     

Acceleration of the redox kinetics of VO2+/VO2 + and V3+/V2+ couples on carbon paper

The redox kinetics of VO²⁺/VO₂ ⁺ and V³⁺/V²⁺ couples on a carbon paper (CP, HCP030 N, Shanghai Hesen, Ltd., China) electrode were investigated in terms of their standard rate constant (k ₀) and reaction mechanism. The values determined for k ₀ for VO²⁺ ?? VO₂ ⁺ and V³⁺ ?? V²⁺ using the CP electrode are 1.0 × 10^?3 and 1.1 × 10^?3 cm s^?1, respectively. The value of k ₀ increases by one or two order(s) of magnitude compared with values obtained using electrodes composed of pyrolytic graphite and glassy carbon. The acceleration of the redox kinetics of vanadium ions is a result of the large surface area of the CP electrode. An inner-sphere mechanism for the reaction on the surface of the electrode is proposed. The kinetic features of vanadium redox reactions on the CP electrode reveal that CP is suitable for use as the electrodes in vanadium redox-flow batteries.     

Azimuthal wave number control of oscillatory thermocapillary convection in a liquid bridge

Thermocapillary convection in a half‐zone liquid bridge of high Prandtl number fluid is widely known to exhibit a three‐dimensional oscillatory flow after the onset of oscillation. The oscillatory flow presents ‘standing’ and ‘traveling’ flows depending upon the temperature difference between the top and bottom rods. In the oscillatory state, the flow shows a modal structure with an azimuthal wave number that depends on the aspect ratio of the liquid bridge and the intensity of the thermocapillarity expressed by the Marangoni number. The present study attempted to control the azimuthal wave number by heating the free surface locally with a prescribed frequency and intensity. The flow in the liquid bridge exhibited different modal structures depending on the heating conditions and a relationship between the frequency and the modal structure was obtained. © 2005 Wiley Periodicals, Inc. Heat Trans Asian Res, 34(7): 460–469, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20086     

Sensory‐motor control mechanism for reaching movements of a redundant musculo‐skeletal arm

This paper studies the human arm's sensory‐motor control mechanism in reaching movements. First, we formulate both the kinematics and dynamics of a two‐link planar arm model with six redundant muscles. The nonlinear muscle dynamics is modeled based on several biological understandings. We then show the stability of the overall system and perform some numerical simulations. By considering the internal forces induced by the redundant muscles, we show that the damping factors in each joint can be regulated, and as the result, it can realize humanlike quasistraight line reaching movements. In addition, we also propose the gravity compensation method at the muscle input level and present the result of numerical simulation to verify the usefulness of this method. © 2005 Wiley Periodicals, Inc.