Collection efficiency of liquid‐based samplers for fungi in indoor air

This study assessed the collection efficiency (CE) of two popularly used sampling devices (BioSampler and Coriolis sampler) for fungal aerosols. Phosphate‐buffered saline (PBS) supplemented with or without surfactant (Tween‐20, Tween‐80, or Triton X‐100) and antifoam agent was prepared and used as collection liquids. The agar impactor (BioStage) was simultaneously operated with liquid‐based samplers to collect fungi from seven sites located at a university building, public library, and animal farming. Fungal concentrations determined by liquid samplers were divided by those by BioStage, and the ratio values represented CE. Results indicate that the CE of BioSampler was superior to that of Coriolis (P = 0.0001) and the PBS containing surfactant collected fungi better than that without surfactant (P < 0.0001), whereas antifoam agent showed no influence (P = 0.8). Moreover, fungal concentrations determined by BioSampler with surfactant‐added PBS were statistically indifferent from those by BioStage (P > 0.05) with a Spearman correlation coefficient of 0.81‐0.83 (P < 0.01). In addition to sampler and collection liquid, sampling location was also identified as a significant CE factor (P = 0.006), implying potential influences by fungal genera in the studied fields. Overall, BioSampler with surfactant‐supplemented PBS (eg, Triton X‐100) is recommended considering the great CE and compatibility with a variety of analytical assays.     

Revised Estimates of Dimension and Exercise Variance Components in Assessment Center Postexercise Dimension Ratings.

The authors reanalyzed assessment center (AC) multitrait-multimethod (MTMM) matrices containing correlations among postexercise dimension ratings (PEDRs) reported by F. Lievens and J. M. Conway (2001). Unlike F. Lievens and J. M. Conway, who used a correlated dimension-correlated uniqueness model, we used a different set of confirmatory-factor-analysis-based models (1-dimension-correlated Exercise and 1-dimension-correlated uniqueness models) to estimate dimension and exercise variance components in AC PEDRs. Results of reanalyses suggest that, consistent with previous narrative reviews, exercise variance components dominate over dimension variance components after all. Implications for AC construct validity and possible redirections of research on the validity of ACs are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Non-deterministic exponential time has two-prover interactive protocols

We determine the exact power of two-prover interactive proof systems introduced by Ben-Or, Goldwasser, Kilian, and Wigderson (1988). In this system, two all-powerful noncommunicating provers convince a randomizing polynomial time verifier in polynomial time that the inputx belongs to the languageL. We show that the class of languages having tow-prover interactive proof systems is nondeterministic exponential time.We also show that to prove membership in languages inEXP, the honest provers need the power ofEXP only.The first part of the proof of the main result extends recent techniques of polynomial extrapolation used in the single prover case by Lund, Fortnow, Karloff, Nisan, and Shamir.The second part is averification scheme for multilinearity of a function in several variables held by an oracle and can be viewed as an independent result onprogram verification. Its proof rests on combinatorial techniques employing a simple isoperimetric inequality for certain graphs:     

ON THE USE OF BUFFER INVENTORIES TO MINIMIZE COSTS WITH AN UNRELIABLE MACHINE

In this paper, we discuss the problem of quality control with an unreliable machine which produces defects at a rate of Λ₀, per unit when in-control and a rate of Lambda; ₁, when out-of-control (where Λ₁ Λ ₀). Every h time periods, we sample n units, count the number of defects, and (using a process based on a Shewart c-chart) test the hypothesis that the machine is in control by comparing the total number of defects to an upper control limit (UCL). More important, we introduce the concept that a buffer inventory which immediately follows the unreliable machine may reduce expected total costs. This buffer serves to delay the movement of items from the unreliable machine to the next stage of the production process. In this way, we can isolate and repair most defective items before they are embedded in a product downstream or sold to customers where repair is more costly. To search for the optimal control policy, we find bounds for n, h, and UCL; given values for these variables, we show how the optimal buffer size can be determined directly. Numerical results illustrate the magnitude of potential savings.     

Sliding wear of Al2O3P/6061 Al composite

The mild sliding wear behaviour of a 15 vol % Al₂O_3P/6061 Al composite has been investigated by using a pin-on-disc reciprocating sliding machine. The composite has been shown to exhibit an excellent wear resistance as compared to the unreinforced matrix alloy. The wear rate of the composite under dry wear conditions with a 12N load is approximately one tenth of that in the 6061 aluminium alloy. The wear rate of the composite under lubrication with 15W/40 gear oil under a 100N load is only one thousandth ofthat in the 6061 aluminium alloy.The dry wear resistance of an over-aged sample is shown here to be better than a peak aged or under-aged sample when the composite was aged at 160°C. The coefficient of friction of the composite was approximately 0.5–0.6 under dry conditions and 0.07 in lubricated wear experiments.In the initial stage, the worn surface of the composite under dry conditions is primarily composed of ploughed grooves and ductile tear. The composite makes a conducting contact with the steel pin. The worn surface is composed of compacted powder and the contact potential gradually increases when the period of the wear experiment goes beyond 2 h.     

Stereological estimation of the total volume of MR visible brain lesions in patients with multiple sclerosis

Point counting represents a convenient and efficient technique for estimating the area of transects through multiple sclerosis (MS) lesions on magnetic resonance (MR) images obtained for sections through the brain. When sectioning has been performed according to the Cavalieri method, unbiased estimates of the total volume of MR-visible MS plaques can be obtained with a precision of 3–5% in 5–10 min.     

Efficiency improvement of near-ultraviolet InGaN LEDs using patterned sapphire substrates

The use of conventional and patterned sapphire substrates (PSSs) to fabricate InGaN-based near-ultraviolet (410 nm) light-emitting diodes (LEDs) was demonstrated. The PSS was prepared using a periodic hole pattern (diameter: 3 /spl mu/m; spacing: 3 /spl mu/m) on the (0001) sapphire with different etching depths. From transmission-electron-microscopy and etch-pit-density studies, the PSS with an optimum pattern depth (D/sub h/=1.5 /spl mu/m) was confirmed to be an efficient way to reduce the thread dislocations in the GaN microstructure. It was found that the output power increased from 8.6 to 10.4 mW, corresponding to about 29% increases in the external quantum efficiency. However, the internal quantum efficiency (@ 20 mA) was about 36% and 38% for the conventional and PSS LEDs, respectively. The achieved improvement of the output power is not only due to the improvement of the internal quantum efficiency upon decreasing the dislocation density, but also due to the enhancement of the extraction efficiency using the PSS. Finally, better long-time reliability of the PSS LED performance was observed.     

Enhanced output power of near-ultraviolet InGaN-GaN LEDs grown on patterned sapphire substrates

Near-ultraviolet nitride-based light-emitting diodes (LEDs) with peak emission wavelengths around 410 nm were fabricated onto c-face patterned sapphire substrates (PSS). It was found that the electroluminescence intensity of the PSS LED shown 63% larger than that of the conventional LED. For a typical lamp-form PSS LED operating at a forward current of 20 mA, the output power and external quantum efficiency were estimated to be 10.4 mW and 14.1%, respectively. The improvement in the light intensity could be attributed to the decrease of threading dislocations and the increase of light extraction efficiency in the horizontal direction using a PSS.     

Solving the bi-objective personnel assignment problem using particle swarm optimization

A particle swarm optimization (PSO) algorithm combined with the random-key (RK) encoding scheme (named as PSORK) for solving a bi-objective personnel assignment problem (BOPAP) is presented. The main contribution of this work is to improve the f₁_f₂ heuristic algorithm which was proposed by Huang et al. [3]. The objective of the f₁_f₂ heuristic algorithm is to get a satisfaction level (SL) value which is satisfied to the bi-objective values f₁, and f₂ for the personnel assignment problem. In this paper, PSORK algorithm searches the solution of BOPAP space thoroughly. The experimental results show that the solution quality of BOPAP based on the proposed method is far better than that of the f₁_f₂ heuristic algorithm.     

An adaptive watermarking scheme for e-government document images

This paper proposes an adaptive watermarking scheme for e-government document images. The adaptive scheme combines the discrete cosine transform (DCT) and the singular value decomposition (SVD) using luminance masking. As a core of masking model in the human visual system (HVS), luminance masking is implemented to improve noise sensitivity. Genetic algorithm (GA), subsequently, is employed for the optimization of the scaling factor of the masking. Involving a number of steps, the scheme proposed through this study begins by calculating the mask of the host image using luminance masking. It is then continued by transforming the mask on each area into all frequencies domain. The watermark image, following this, is embedded by modifying the singular values of DCT-transformed host image with singular values of mask coefficient of host image and the control parameter of DCT-transformed watermark image using Genetic Algorithm (GA). The use of both the singular values and the control parameter respectively, in this case, is not only to improve the sensitivity of the watermark performance but also to avoid the false positive problem. The watermark image, afterwards, is extracted from the distorted images. The experiment results show the improved adaptive performance of the proposed scheme is in resistant to several types of attacks in comparison with the previous schemes; the adaptive performance refers to the adaptive parameter of the luminance masking functioned to improve the performance or robustness of an image from any attacks.