Novel method for simultaneous formation of wires and vias of a printed circuit board using nanoporous body

A new type of a flexible printed circuit board with landless vias is developed using a novel method called interconnection via nanoporous structure (INPS). This method can make wires and vias of the printed circuit board simultaneously by a single photo-exposure process. A new photo-induced selective plating method was used to impregnate a nanoporous substrate with copper, and a new photomask was designed, which constitutes of a completely vacant large hole for via and aggregation patterns of very fine holes for wire. Because of the simple process, the INPS board is characterized by landless vias and very fine circuit. Owing to the structure, it is also characterized by flexibility and detachable wires.     

Erythroid potentiating activity of tissue inhibitor of metalloproteinases on the differentiation of erythropoietin-responsive mouse erythroleukemia cell line, ELM-I-1-3, is closely related to its cell growth potentiating activity

The erythroid-potentiating activity (EPA) of the tissue inhibitor of metalloproteinase-1 (TIMP-1) was re-examined using ELM-I-1-3, a mouse erythroleukemia cell line, which responded well to erythropoietin. Depletion of pre-existing TIMP-1 from fetal calf serum in culture medium using monoclonal antibody suppressed erythropoietin-induced differentiation as measured by the induction of hemoglobin, commitment assay and globin mRNAs. The removal of TIMP-1 also suppressed the proliferation of ELM-I-1-3 as measured by cell number and de novo DNA synthesis. These changes were reversed by the addition of purified TIMP-1 to the culture medium. Anti-TIMP-1 antibody also blocked both hexamethylene bisacetamide (HMBA)-induced erythroid differentiation and the proliferation of both ELM-I-1-3 and Friend erythroleukemia cells. Considering previous reports analyzing the chemical induction of Friend mouse erythroleukemia cell differentiation, our results suggest that erythropoietin- or HMBA-induced erythroid differentiation might also be coupled with cell proliferation. Our 3H thymidine-uptake experiment shows that TIMP-1 removal was also effective in the inhibition of cell growth of various other cell lines in addition to erythroleukemia cell lines. These results suggest that EPA action of TIMP-1 on erythroid leukemia cell lines is closely related to its activity to promote the cell growth of various cell lines and cells including erythroleukemia cell lines.     

Low-threshold, highly reliable 630 nm-band AlGaIP visible laserdiodes with AlInP buried waveguide

Low-threshold, highly reliable 630 nm-band AlGaInP visible laser diodes have been developed by employing a low-loss optical waveguide buried in the AlInP layer. A low-threshold current of 19 mA at 25°C is obtained with a cavity length of 310 μm. This current is the lowest value for 630 nm-band AlGaInP visible laser diodes, to our knowledge. Our AlInP-buried laser diodes with a cavity length of 500 μm operated over 7000 h without significant degradation at 60°C and 5 mW     

Clinical implications of chromosomal abnormalities in 401 patients with myelodysplastic syndromes: a multicentric study in Japan

It is well known that cytogenetic analysis in patients with myelodysplastic syndrome (MDS) provides information useful in determining their prognosis. Based on the chromosomal results obtained from 401 MDS patients by a multicentric study in Japan, we studied correlations between chromosomal findings and prognosis or leukemic transformation in MDS patients. Patients with complex aberrations (cytogenetic abnormalities at more than three chromosomes), of any subtype, had a poor prognosis; for example, > 60% of patients with refractory anemia (RA) showing complex aberrations died within one year, but only 11% of them developed leukemia. In patients with RA with ringed sideroblasts (RARS), > 70% of those with complex aberrations evolved into the leukemic phase and survived for less than one year, suggesting a biologic heterogeneity in RARS patients. By contrast, about 5% of patients with RA or RARS exhibiting chromosomal findings other than -7/7q-, +8, two aberrations, and complex aberrations, developed leukemia and had a favorable prognosis. Therefore, the presence of chromosome abnormalities alone in patients with RA or RARS is not a factor in predicting leukemic transformation or poor prognosis. In patients with refractory anemia with an excess of blasts (RAEB), the presence of chromosome aberrations at MDS diagnosis affected the occurrence of leukemic transformation (24% versus 43%), however, no particular difference was noted in patients with RAEB in transformation with regard to whether they had chromosome changes or not, and about 60% of them evolved into leukemia. The poor prognosis related to complex aberrations was consistently noted in all MDS subtypes or age-matched groups, indicating that this cytogenetic anomaly is an independent risk factor for a poor prognosis in MDS patients. The duration between MDS diagnosis and development of the leukemic phase and that between the latter and death were significantly shorter in patients with complex aberrations than those without this change. Although the clinical significance of certain chromosomal abnormalities differs among subtypes of MDS, a new scoring system for predicting prognosis by cytogenetic changes, in combination with hematologic parameters, was proposed.     

Production of Ceramic Green Bodies Using a Microwave-Reactive Organic Binder

Because the pyrolysis of organic substances can result in the emission of harmful pollutant gases, a reduction in the use of organic binders is one aim of today's ceramics industry. A novel ceramic-forming process was developed that requires considerably less organic binder than conventional techniques. The process involves immobilizing reactive molecules on the surfaces of the particles, which on subsequent irradiation with microwaves, form bridges that bind the entire particle assembly together. The chemical forces involved produce strong bonds, resulting in a significant reduction in the amount of organic binder that is required to maintain the shape of the ceramic green body. This method will help to decrease emissions of harmful gases produced from pyrolysis of the binder.     

Gas barrier properties and periodically fractured surface of thin DLC films coated on flexible polymer substrates

Thin DLC films coated on polymer surfaces are attracting considerable attention due to their wide applications and their interesting surface properties. When DLC films were coated on polymers, the resulting DLC-polymer composites are highly functionalized materials, some of which presenting dramatically improved gas barrier properties.In this paper, we will introduce several commonly used polymers including polyethylene terephthalate (PET), polyethylene (PE) and polypropylene (PP) for semi-crystalline polymers, and polymethyl methacyrlate (PMMA) for an amorphous polymer. The polymers were coated with thin DLC films and the gas barrier properties of the resulting DLC-polymer composites were investigated. Some of the DLC-polymer composites dramatically improved their gas barrier properties while they presented horizontal crack lines and vertical micro-buckling lines on the DLC surface when stretched to a certain strain. The gas barrier properties of the DLC-polymer composites with fractured DLC surface were also studied. It was found that the gas barrier property of the polymer substrates with lower residual strains was less damaged, when the substrates were mechanically deformed, than that of the polymer substrates with higher residual strains. When the number of the cracks increases, the strain imposed on each crack decreases, since the overall deformation is almost equally distributed to each crack while the crack spacing of each crack becomes shorter. Thus, it was found that the degradation of the gas barrier property after mechanical deformation is dependent on the residual strain of the polymers and the number of cracks on DLC films.     

In Situ Chelating Synthesis of Hierarchical LiNi1/3Co1/3Mn1/3O2 Polyhedron Assemblies with Ultralong Cycle Life for Li‐Ion Batteries

Layered lithium transition‐metal oxides, with large capacity and high discharge platform, are promising cathode materials for Li‐ion batteries. However, their high‐rate cycling stability still remains a large challenge. Herein, hierarchical LiNi_1/3Co_1/3Mn_1/3O₂ polyhedron assemblies are obtained through in situ chelation of transition metal ions (Ni²⁺, Co²⁺, and Mn²⁺) with amide groups uniformly distributed along the backbone of modified polyacrylonitrile chains to achieve intimate mixing at the atomic level. The assemblies exhibit outstanding electrochemical performances: superior rate capability, high volumetric energy density, and especially ultralong high‐rate cyclability, due to the superiority of unique hierarchical structures. The polyhedrons with exposed active crystal facets provide more channels for Li⁺ diffusion, and meso/macropores serve as access shortcuts for fast migration of electrolytes, Li⁺ and electrons. The strategy proposed in this work can be extended to fabricate other mixed transition metal‐based materials for advanced batteries.     

Clinicopathological significance of intratubular giant macrophages in progressive glomerulonephritis

Very large macrophages, which we have termed "giant macrophages" (G-M phi), have been found in renal tubules, some containing cytoplasmic vacuoles. To elucidate their pathophysiological roles, we examined renal biopsy tissues from various primary glomerulonephritis (GN) and tubulointerstitial nephritis (TIN) using immunohistochemistry with monoclonal antibodies against M phi and other cell surface markers. Giant macrophages were absent or rare in TIN, minimal change nephrotic syndrome, and minor glomerular abnormalities, but G-M phi was plentiful in progressive glomerulonephrides such as IgA nephropathy with crescents, membranoproliferative GN, focal segmental glomerulosclerosis, and especially in crescentic GN. These G-M phi were usually seen in the lumen of renal tubules, but occasionally were found in the Bowman's spaces and glomerular tufts, and similar cells were also found in urine. Moreover, they frequently made contact with tubular epithelial cells expressing intercellular adhesion molecule-1, and the tubular epithelial cells in such lesions often had degenerative changes. Giant M phi may damage tubular epithelial cells from the luminal side. Phenotypically, G-M phi showed activated (CD71+) and mature (25F9+) characteristics along with features of M phi (CD68+), and the cytoplasm contained a great deal of lipids. The numbers of G-M phi in renal tissues closely correlated with the degree of hematuria (rho = 0.5, P < 0.001), serum creatinine value (r = 0.63, P < 0.001) in GN patients (N = 96) and with proteinuria in IgA nephropathy patients (r = 0.89, P < 0.001, N = 27). These data suggest that G-M phi are M phi that were activated and matured in certain active inflammatory sites, which flowed into tubules and then into urine. Thus, the existence of G-M phi in biopsy tissue or urine reflect the activity of GN and may have a predictive value for the progression of GN.     

In situ measurements of ion-exchange processes in single polymer particles: laser trapping microspectroscopy and confocal fluorescence microspectroscopy

Ion-exchange processes of a cationic dye (Rhodamine B; RhB) were studied for individual polymer particles (diameter of 16-20 μm) by laser trapping microspectroscopy and confocal fluorescence laser microspectroscopy. The absorbance of RhB at 565 nm adsorbed on a cation-exchange particle increased linearly with the concentration of RhB in the aqueous phase, while it was independent of the particle diameter. Fluorescence intensity profile measurements of RhB along the particle diameter by confocal fluorescence microspectroscopy directly proved that ion exchange took place in the surface layer (～2-μm thickness) of the particle in the initial stage (1 h). Diffusion of RhB in the particle was very slow, and ion exchange proceeded gradually to the inner volume in the order of days. The ion-exchange processes were analyzed on the basis of simulation of the time course of the concentration profile of RhB in the particle, and the diffusion coefficient of RhB was determined to be (2-4) × 10(-11) cm(2)·s(-1).     

Local normalized linear summation kernel for fast and robust recognition

Kernel-based methods are effective for object detection and recognition. However, the computational cost when using kernel functions is high, except when using linear kernels. To realize fast and robust recognition, we apply normalized linear kernels to local regions of a recognition target, and the kernel outputs are integrated by summation. This kernel is referred to as a local normalized linear summation kernel. Here, we show that kernel-based methods that employ local normalized linear summation kernels can be computed by a linear kernel of local normalized features. Thus, the computational cost of the kernel is nearly the same as that of a linear kernel and much lower than that of radial basis function (RBF) and polynomial kernels. The effectiveness of the proposed method is evaluated in face detection and recognition problems, and we confirm that our kernel provides higher accuracy with lower computational cost than RBF and polynomial kernels. In addition, our kernel is also robust to partial occlusion and shadows on faces since it is based on the summation of local kernels.