Static energy reduction techniques for microprocessor caches

Microprocessor performance has been improved by increasing the capacity of on-chip caches. However, the performance gain comes at the price of static energy consumption due to subthreshold leakage current in cache memory arrays. This paper compares three techniques for reducing static energy consumption in on-chip level-1 and level-2 caches. One technique employs low-leakage transistors in the memory cell. Another technique, power supply switching, can be used to turn off memory cells and discard their contents. A third alternative is dynamic threshold modulation, which places memory cells in a standby state that preserves cell contents. In our experiments, we explore the energy and performance tradeoffs of these techniques. We also investigate the sensitivity of microprocessor performance and energy consumption to additional cache latency caused by leakage-reduction techniques.     

Role of carrier material in encapsulation of yeast (Saccharomyces cerevisiae) by spray drying

ABSTRACT

Yeast was encapsulated using different carrier materials and their combinations to explore the possible synergistic effect of carrier material during encapsulation using spray drying. Freeze-drying was performed for comparison. The dried cell powders were analyzed for the quality aspects (morphology, flowability, and storage stability). The best results were observed, with a combination of whey protein and corn starch (cell survival: 82.37% and yield: 56%, w/w) with a shelf life of 6 months (with only 10% reduction in cell survival). The survival was found to be 40% without any carrier material, which decreased to less than 25% within 4 weeks.     

A generic method for determining up/down orientation of text in roman and non-roman scripts

This paper presents a method for determining the up/down orientation of text in a scanned document of unknown orientation, so that it can be appropriately rotated and processed by an optical character recognition (OCR) engine. The method analyzes the “open” portions of text blobs to determine the direction in which the open portions face. By determining the respective densities of blobs opening in a pair of opposite directions (e.g., right or left), the method can establish the direction in which the text as a whole is oriented. We first describe a method for determining the up/down orientation of roman text based on the asymmetry in the openness of most roman letters in the horizontal direction. For non-roman text such as Pashto and Hebrew, we provide a method that determines a direction that is the most asymmetric, and therefore the most useful for the determination of text orientation, given a training data set of documents of known orientation. This work can be adapted for use in automated mail processing or to determine the orientation of checks in automated teller machine envelopes, scanned or copied documents, documents sent via facsimile, and digital photographs that include text (e.g., road signs, business cards, driver's licenses), among other applications.     

An inductive approach to learning and reusing design strategies

We describe a computer system called LearnIT II, which can observe an iterative solution to a parametric design problem and learn the design strategy employed. The program uses identification tree learning to determine which attributes of the design best indicate which design modifications the designer will make. The program re-represents the identification trees as design rules which it can then use to create new designs automatically. Because the rules are learned from the designer, the new designs reflect the designer's engineering judgment, knowledge of implicit constraints, and overall familiarity with the problem. The program has a number of intended uses. As a design automation tool, it provides a convenient means for exploring a design space. As a design documentation tool, it implicitly captures the original designer's insights about a problem and brings them to bear when it is necessary to modify the design. As a tool for preserving institutional memory, it captures design strategies and preserves them for future use.     

用模拟电压控制数字电位计

本文描述了一个用模拟电压通过设备的I2C接口控制数字电位计的设计。MicrochipPIC12F683微控制器中的ADC将模拟电压转换为控制MaximDS1803数字电位计的I2C流（图1和参考文献1）。在该微控制器的六个I/O通用引脚中,两个引脚控制SDA（系统数据）和SCL（系统时钟线）输出信号，一个控制一只LED，一个接收模拟输入信号。SDA和SCL直接连接到数字电位计的SDA和SCL引脚，分别通过两个4.7kΩ上拉电阻接到VDD。通过接通或断开跳线，可将共用的VCC和VDD分开，并将SDA和SCL隔离。     

A new energy efficient, environment friendly and high productive texturization process of industrial multicrystalline silicon solar cells

A new texturization process based on a uniform, isotropic and slow removal of silicon, using a composition of sodium hydroxide (NaOH) and sodium hypochlorite (NaOCl) solution at an elevated temperature is developed recently for multicrystalline silicon solar cells. This process is applied in optimized condition in regular industrial production line and it immediately replaces the old popular industrial process of texturization using a combination of NaOH solution, alcoholic NaOH solution and hydrochloric acid solution in different steps at a higher temperature. Also the gain in solar cell efficiency at global AM1.5 spectrum, 1 SUN intensity condition is nearly 10% in final value. In addition, it has become finally an energy efficient and environment friendly texturization process for large area multicrystalline silicon solar cells for commercial use. In this paper the cost effectiveness and environment friendly aspects of the proposed process have been studied in detail along with the surface texture analysis of wafers with SEM and AFM micrographs to substantiate the reasons behind the above facts.     

ZnO nanostructure thin films by continuous spray pyrolysis using doped precursor for Si solar cell application

This work presents deposition of Zn solution seed layer assisted growth of zinc oxide (ZnO) nanostructure layers by continuous spray pyrolysis reactor using lanthanides (Er and Eu) and metal (Al) influenced zinc acetate precursor solution. Dopants in precursors have influenced structural property, surface morphology and optical reflectance of resulting ZnO thin films which are supported by X-ray diffractometer, scanning electron microscope and reflectance measurements. Enhanced dispersion amongst nanorods is observed under the influence of Er and Al dopant in ZnO thin film. The change of precursor from Zinc acetate to Titanium tetraisopropoxide for Er doped precursor is helping to achieve better crystalline ZnO nanorods arrangement with increased homogenous growth, which results into improved light reflectance reduction of thin film. The experimental evidences of light reflectance from ZnO nanorods on Si surface is studied with the help of FDTD based Lumerical software package which can be a useful study for designing ZnO nanorods thin film in device purposes. The utility of ZnO layer by this reactor on low efficiency Si solar cell is also explored in improving device efficiency via increase of photocurrent.     

DSP based inverter control for alternate energy systems

This paper presents a DSP based algorithm to control inverters used in interfacing alternate energy systems with the electric utility. Since a constant and ripple free dc bus voltage is not ensured at the output of alternate energy sources, the main aim of the proposed algorithm is to make the output of the inverter immune to the fluctuations in the dc input voltage. In this paper a modified space vector pulse width modulation (SVPWM) technique is proposed which will maintain the quality of the ac output of the inverter, regardless of the ripple present at the inverter input. The principle is explained qualitatively and extensive experiments have been carried out to verify and validate the proposed algorithm. A 16-bit fixed-point C2000 family DSP from Texas Instruments was used as the controller to implement the proposed control algorithm.