Performance of a new pipe material UHMWPE against disinfectant decay in water distribution networks

Clean Technologies and Environmental Policy - The concentration of any disinfectant is a major parameter which is used to evaluate the quality of water. Chlorine is the most common disinfecting...     

Synthesis and characterization of conducting copolymers from aniline and o‐anisidine in HCl solutions

Conducting poly(aniline‐co‐o‐anisidine) (PAS) films with different ratios of aniline units in the polymer chain were prepared by oxidative polymerization of different molar ratios of aniline and o‐anisidine in 1 M HCl using cyclic voltammetry. Due to the much higher reactivity of o‐anisidine, the structure and properties of PASs were found to be dominated by the o‐anisidine units. The polymerization of poly‐o‐anisidine and PASs followed zero‐order kinetics with respect to formation of the polymer (film thickness) and the autocatalytic polymerization of aniline was completely inhibited. In contrast to polyaniline, a decrease in the polymerization temperature was found to increase the amount of copolymer formed and its redox charge. The presence of aniline units in PASs led to a pronounced increase in the molecular weight and conductivity, and a decrease in the solubility in organic solvents. Repetitive charging/discharging cycles showed that PASs resist degradation more than polyaniline. Copyright © 2003 Society of Chemical Industry     

Perceptual learning of spatial localization: specificity for orientation, position, and context

Discrimination of simple visual attributes can improve significantly with practice. We have trained human observers to perform peripherally presented tasks involving the localization of short line segments and examined the specificity of the learning for the visual location, orientation, and geometric arrangement of the trained stimulus. Several weeks of training resulted in dramatic threshold reductions. The learning was specific for the orientation and location of the trained stimulus, indicating the involvement of the earliest cortical stages in the visual pathway where the orientation and location of stimuli are mapped with highest resolution. Furthermore, improvement was also specific for both the configuration of the trained stimulus and the attribute of the stimulus that was under scrutiny during training. This degree of specificity suggests that the learning cannot be achieved by cortical recruitment alone, as proposed in current models, but is likely to involve a refinement of lateral interactions within the cortex and possibly a gating of lower level changes by attentional mechanisms.     

Corrosion Control by water‐soluble extracts from leaves of economic plants

Water extracts from leaves of date palm, phoenix dactylifera, henna, Lawsonia inermis, and corn, Zea mays, were tested as corrosion inhibitors for steel, aluminum, copper and brass in acid chloride and sodium hydroxide solutions using weight loss, solution analysis and potential measurements. The inhibition action was found to critically depend on metal type and solution composition. Only, date palm and henna extracts were found highly effective in reducing corrosion rate of steel in acid chloride solutions and aluminum in sodium hydroxide solutions. The inhibition efficiency increased with increasing the concentration of the extract. The inhibition was interpreted in terms of chemisorption of some active ingredients in the leaves according to Temkin isotherm.     

Determination of gas dispersion in vapor extraction of heavy oil and bitumen

In this work, a mathematical model is developed and simulated to determine gas dispersion along with solubility during the vapor extraction (Vapex) of live oil from a laboratory scale physical model. The physical model is a rectangular block of homogenous porous medium saturated with heavy oil and bitumen. At a given temperature and pressure, the block is initially exposed on its side to a solvent gas, which diffuses into the medium and gets absorbed. The absorption of gas reduces the viscosity of heavy oil and bitumen causing it to drain under gravity. The low-viscosity “live oil” is produced at the bottom of the porous block. The production of live oil with time is accompanied by the shrinkage of oil in the block as well as its increased exposure to gas from top. These phenomena of Vapex are described by the mathematical model, which is used to calculate live oil production with various values of gas solubility and dispersion. Their optimal values are determined for the vapor extraction of Cold Lake bitumen with butane by matching calculated live oil production with its experimental values published earlier.     

Mechanical ventilation: simplifying the terminology

There is presently considerable ambiguity and confusion relating to ventilator terminology. This can be eliminated using a simple approach, visualising mechanical ventilation as an inspiratory pump, and defining trigger, limit, and cycling in this context. The trigger is the signal that starts a breath by opening the inspiratory valve, the limit is the factor which controls the way gas flows into the lung, and the cycle is the signal that stops the breath by closing the inspiratory valve and opening the expiratory valve. By identifying these three basic parameters, one can precisely dissect and interpret any of the vast ventilatory terminology.     

Tumor size and prognosis in aggressively treated osteosarcoma

PURPOSE: The aim of this retrospective analysis was to investigate the prognostic significance and optimal measures of tumor size in osteosarcoma treated with intensive neoadjuvant chemotherapy. PATIENTS AND METHODS: Initial anterior-posterior (AP) and lateral x-ray films of 128 patients treated within the trials Cooperative Osteosarcoma Study (COSS)-80, -82, and -86, were evaluated for the following three tumor diameters: length, width, and depth. Metastasis-free survival (MFS) analyses were performed in univariate and multivariate models with one, two, and three dimensions of the tumor as absolute or relative measures (tumor length, referred to bone length, plane and volume to body-surface area). RESULTS: Univariate analyses of MFS showed a high prognostic significance of all absolute measures. Relative measures, at best, showed a comparable predictive value. Cox regression analysis indicated the high prognostic significance of absolute tumor volume (ATV; P < .0001) and histologic response (P < .0001). None of 19 patients with an ATV < or = 70 cm3 and only four of 53 with an ATV < or = 150 cm3 relapsed, while in patients with an ATV more than 150 cm3, the relapse rate remained 40% to 60%, irrespective of further increase in volume. CONCLUSION: Initial tumor size is an important and easily obtainable prognostic factor in osteosarcoma and may serve as a basis for risk-adapted therapy. It is best represented by the absolute three-dimensional measure ATV. There is a cut-off point regarding the incidence of metastases at a tumor volume of approximately 150 cm3 as calculated from two-plane x-ray films.     

Synthesis and physicochemical studies of some new amphoteric ion exchangers

Some new amphoteric ion exchangers have been synthesized by condensing salicylic acid, p-hydroxybenzoic acid, sulfosalicylic acid, gallic acid, 3-hydroxy-2-naphthoic acid, β-resorcylic acid, and resacetophenone with epichlorohydrin employing ethylenediamine as a crosslinking agent. Some of the physicochemical properties, such as moisture content, true density, apparent density, void volume fraction, concentration of ionogenic groups, exchange capacity, rate of exchange, pH-titration curves, pK values, isoionic point, thermal stability, oxidation resistance, and swelling behavior in different solvents, have been investigated.     

Delay-dependent anti-windup synthesis for stability of constrained state delay systems using pole-constraints

This paper proposes the design of anti-windup compensator gain for stability of actuator input constrained state delay systems using constrained pole-position of the closed-loop. Based on Delay-Dependent Lyapunov-Krasovskii functionals and local sector conditions, a new LMI characterization is derived that ensures closed-loop asymptotic stability of constrained state delay systems while accounting upper bound fixed state delay and largest lower bound of the system’s pole-position in the formulation of anti-windup gain. Besides, at saturation, the method significantly nullifies the inherent slow dynamics present in the system. It is shown in the comparative numerical examples that the LMI formulation draws stability with improved time-domain performance.     

Observer-based leader-following consensus of one-sided Lipschitz multi-agent systems over input saturation and directed graphs

This paper investigates a local observer-based leader-following consensus control of one-sided Lipschitz (OSL) multi-agent systems (MASs) under input saturation. The proposed consensus control scheme has been formulated by using the OSL property, input saturation, directed graphs, estimated states, and quadratic inner-boundedness condition by attaining the regional stability. It is assumed that the graph always includes a (directed) spanning tree with respect to the leader root to develop matrix inequalities for investigating parameters of the proposed observer and consensus protocols. Further, a new observer-based consensus tracking method for MASs with saturation, concerning independent topologies for communicating outputs and estimates over the network, is explored to deal with a more perplexing and realistic situation. In contrast to the traditional methods, the proposed consensus approach considers output feedback and deals with the input saturation for a generalized class of nonlinear systems. The efficiency of the obtained results is illustrated via application to a group of five moving agents in the Cartesian coordinates.