Sicherheitstechnische Maßnahmen bei der thermischen Abluftreinigung

Safety measures in thermal waste air purification units . Safety problems may arise in thermal waste air purification units from the occasional explosive nature of the exhaust gases, which may cause a flashback into the production plant. This must be avoided by the installation of safety devices that arrest a flashback. The number of such safety devices is determined by the probability of formation of explosive waste air, according to the zone classification of the explosion-protection guide. The principal explosion arrestor devices installed between combustion chamber and production plant are liquid submersion systems, detonation barriers, and dynamic flashback-free inlets into the combustion chamber, all of which must be operated under instrumental surveillance. This report presents a state-of-the-art summary of all suitable procedures and safety devices permitting safe design of systems for thermal air cleaning problems encountered in practice.     

Model reactions on roast aroma formation

Summary From model roastings of mixtures containing serine, threonine and sucrose about 350 volatile compounds were separated and identified by GC/MS. Among them there were more than 100 monocyclic furans, 13 furanones and 8 bicyclic furans, the mass spectra and retention indices of which are recorded. The most important mass spectrometric fragmentation pathways are described. Spectra obtained from roasting coffee under identical conditions are compared with the spectra from model roastings.

---

Modell-Reaktionen zur Röstaroma-BildungII. Die massenspektrometrische Identifizierung von Furanen und Furanonen aus der Reaktion von Serin und Threonin mit Saccharose unter den Bedingungen der Kaffeeröstung

Zusammenfassung Aus Modellröstungen von Gemischen aus Serin, Threonin und Saccharose unter den Bedingungen der Kaffeeröstung wurden etwa 350 flüchtige Verbindungen mittels GC/MS getrennt und identifiziert. Unter ihnen befanden sich über 100 monocyclische Furane und 13 Furanone sowie 8 bicyclische Furane, deren Massenspektren und Retentions-indices angegeben werden. Die wichtigsten massenspektrometrischen Fragmentierungswege werden beschrieben. -Die aus einer gleich behandelten Röstung von Rohkaffee erhaltenen Spektren werden mit denen der Modellröstungen verglichen.

---

---

Dissertation Gloria Bochmann, TU Berlin 1984     

Evaluating hyperspectral imaging of wetland vegetation as a tool for detecting estuarine nutrient enrichment

Nutrient enrichment and eutrophication are major concerns in many estuarine and wetland ecosystems, and the need is urgent for fast, efficient, and synoptic ways to detect and monitor nutrients in wetlands and other coastal systems across multiple spatial and temporal scales. We integrated three approaches in a multi-disciplinary evaluation of the potential for using hyperspectral imaging as a tool to assess nutrient enrichment and vegetation responses in tidal wetlands. For hyperspectral imaging to be an effective tool, spectral signatures must vary in ways correlated with water nutrient content either directly, or indirectly via such proxies as vegetation responses to elevated nitrogen. Working in Elkhorn Slough, central California, where intensive farming practices generate considerable runoff of fertilizers and pesticides, we looked first for long- and short-term trends among temporally ephemeral point data for nutrients and other water quality characters collected monthly at 18 water sampling stations since 1988. Second, we assessed responses of the dominant wetland plant, Salicornia virginica (common pickleweed) to two fertilizer regimes in 0.25 m² experimental plots, and measured changes in tissue composition (C, H, N), biomass, and spectral responses at leaf and at canopy scales. Third, we used HyMap hyperspectral imagery (126 bands; 15–19 nm spectral resolution; 2.5 m spatial resolution) for a synoptic assessment of the entire wetland ecosystem of Elkhorn Slough. We mapped monospecific Salicornia patches (～ 56–500 m²) on the ground adjacent to the 18 regular water sampling sites, and then located these patches in the hyperspectral imagery to correlate long-term responses of larger patches to water nutrient regimes. These were used as standards for correlating plant canopy spectral responses with nitrogen variation described by the water sampling program. There were consistent positive relationships between nitrogen levels and plant responses in both the field experiment and the landscape analyses. Two spectral indices, the Photochemical Reflectance Index (PRI) and Derivative Chlorophyll Index (DCI), were correlated significantly with water nutrients. We conclude that hyperspectral imagery can be used to detect nutrient enrichment across three spatial and at least two temporal scales, and suggest that more quantitative information could be extracted with further research and a greater understanding of physiological and physical mechanisms linking water chemistry, plant properties and spectral imaging characteristics.     

Isothermic growth of one spherulite around circular obstacles in a polypropylene foil

Growth of one spherulite within a thin foil of polypropylene around one circular obstacle or around combinations of circular obstacles is investigated. For each obstacle there exists a region of shadow, seen from the nucleus of the spherulite, which influences the growth of the spherulite. Within any region of shadow the growth fronts are evolvents of the obstacle's boundary, because the spherulite grows isotropically. When two growth fronts belonging to one spherulite meet each other inside the shadow, an intrinsic grain boundary is formed for each obstacle. Additionally, growth of one spherulite around a rectangular obstacle and a spherical obstacle is investigated.     

Zu einem Phänomen der Lochkorrosionsbegrenzung bei hochlegierten Sonderedelstählen und NiCrMo-Legierungen in Chloridlösungen

On a phenomenon of the limitation of pitting corrosion at high alloyed special stainless steels and NiCrMo-alloys in chloride solutions Testing the pitting corrosion resistance of high alloyed special stainless steels and NiCrMo-alloys in chloride solutions there was observed a limitation of the pitting corrosion range toward more positive potentials. Above this limitation, the so-called pitting corrosion limitation potential, the pit initiation by all means is prevented, but the growth of pits which had been initiated before in the pitting corrosion range not necessarily comes to a stop. Therefore current density-potential curves which are obtained by downward polarization after an initial potential jump into the transpassive region and chronopotentiostatic tests are more suitable to investigate this phenomenon than cyclic polarization measurements and potentiostatic alteration tests. There is indicated a dependence of this phenomenon on temperature. The phenomenon of a limitation of the pitting corrosion range toward more positive potentials has been found until now at alloy 926, alloy 31, alloy 28, alloy 59 and alloy C-276.     

Rotating magnetic field-driven flows in conductive inhomogeneous media: Part I—Numerical study

This paper presents a numerical study of the Lorentz force and fluid flow induced by a rotating magnetic field in a medium with a nonhomogeneous electric conductivity placed in a cylindrical vessel with insulated walls. The nonhomogeneity is modeled by the presence of a solid and a liquid phase of different electrical conductivity. The solid phase is located orthogonally to the axis of rotation, which corresponds to the case of unidirectional solidification. The simulations were performed for different locations of the solid front and different ratios of the electrical conductivity, σ _s /σ _l =0.2... 10. Here σ _s and σ _l are the electric conductivity of the solid and liquid phases, respectively. The results showed that the difference between electrical conductivity of solid and liquid phases has a noticeable effect on the mean-time Lorentz force and the velocity: namely, the presence of the solid phase (σ _s >σ _l ) leads to an increase of the Lorentz force and fluid flow in the cylinder.