减水剂类型对赤泥—矿渣基地聚物注浆材料性能的影响及机理研究

针对赤泥等固体废弃物对环境危害性大且利用率低等问题,以碱激发赤泥-矿渣基地聚物注浆材料为 研究对象,研究了不同掺量的聚羧酸(PA)减水剂、醛酮缩合物(AKC)减水剂和萘系(N)减水剂对材料凝结时间、流动 性及强度等的影响,并通过 XRD、傅里叶红外光谱及 SEM 等设备对减水剂的作用机理进行研究。 结果表明:减水剂增 强了材料的流动性但降低了材料的剪切应力;N 和 PA 减水剂能缩短材料的凝结时间,但 AKC 减水剂会延长材料的凝 结时间;N 和 AKC 减水剂能提高材料的强度,但 PA 减水剂会降低材料的强度;N 减水剂对材料的综合性能提升效果 更加明显,其最优掺量为 0. 7%;减水剂对赤泥-矿渣基地聚物性能提升的作用机理主要是促进地聚合物凝胶的形成。 研究成果为拓展赤泥在工程上的使用途径和效率提供了理论指导。     

安棚深层系凝析气井射孔压井液技术研究

介绍了一种保护油气层的射孔压井液技术，该技术所用的配方具有低密度，低表面张力且具有较强的防膨能力等特点，在安棚深层系低孔低渗油田安3003等凝析气井作业中现场试验，解决了安棚深层系低压气井的水锁伤害等问题，对低孔低渗油气田作业入井流体的研究与应用具有较好的借鉴意义。     

赵凹区块酸化增注技术研究与应用

针对河南油田赵凹区块注水效果不好,欠注严重,酸化效果不理想的实际情况,开展了储层伤害因素分析和酸化增油技术研究,进行了酸液体系的配方优化,优选出的酸液具有对金属腐蚀性小,与地下流体配伍性好,对岩屑溶蚀率高的特点。现场实验取得了较好的增注效果,3口井实施有效率100％,注水压力下降了1-8 MPa。     

在振动磨中PVC的降解及与MMA共聚反应的研究

考察了温度、振幅、钢球直径等对ＰＶＣ在振动磨中降解的影响，确定ＰＶＣ力化学降解为无规断链过程。用力化学方法在振动磨中合成了ＭＭＡ－ＰＶＣ共聚物，通过ＩＲ和ＮＭＲ对ＭＭＡ－ＰＶＣ共聚物结构进行了鉴定，研究了ＰＶＣ／ＭＭＡ配比和振磨时间对共聚反应产率及共聚物组成的影响。热失重分析、ＳＥＭ观察和冲击强度测定结果表明，ＭＭＡ－ＰＶＣ共聚物比ＰＶＣ具有较高的热稳定性；ＭＭＡ－ＰＶＣ共聚物对ＰＶＣ／ＰＨＭＡ（聚甲基丙烯酸己酯）体系有增容作用     

中性固色剂NF在分散／活性一浴热溶染色中的应用

本文对涤棉混纺织物在分散/活性染料同浴染色中采用碱固工艺与中性固色工艺作了较详细的对比试验,同时对中性固色剂及双氰胺的用量进行了优选组合,并对中性固色剂的效果进行了讨论。     

OBSERVATION ON SPUTTERING SURFACE OF ALLOYS IN GLOW DISCHARGE

Glow discharge cathodic sputtering of alloys containing second phase precipitates or injectedoxide particles has been observed with energy dispersive X-ray spectrometer and scanningelectron microprobe.It was shown that the formation of cones during the sputtering in thesealloys is due to masking of the matrix by glow sputtering second phase precipitates or oxideparticles.At steady state,the density of cottes were found to be a function of the densities pre-cipitates or oxide particles in bulk alloy.In addition to the changes of local sputtering rate,theelectrostatic effect may play a role on the formation fo cones.     

耐高温硅酮油墨的研制

以聚硅氧烷为主体材料，配以钛白粉和其它助剂制成硅酮油墨，并研究了增粘剂添加量、催化剂用量对其耐冷热冲击性、耐热性、耐溶剂性的影响     

Prediction of particle motion in a two-dimensional bubbling fluidized bed using discrete hard-sphere model

The solids motion in a gas-solid fluidized bed was investigated using a discrete hard-sphere model. Detailed collision between particles and a nearest list method are presented. The turbulent viscosity of gas phase was predicted by subgrid scale (SGS) model. The interaction between gas and particles phases was governed by Newton's third law. The distributions of concentration, velocity and granular temperature of particles are obtained. The radial distribution function is calculated from the simulated spatio-temporal particle distribution. The normal and shear stresses of particles are predicted from the simulated instantaneous particle velocity. The pressure and viscosity of particles are obtained from both the kinetic theory of granular flow and the calculated stresses of particles. For elastic particles the individual lateral and vertical particle velocity distribution functions are isotropic and Maxwellian. The observed anisotropy becomes more pronounced with increasing degree of inelasticity of the particles.     

Study on Sintered Synthetic Hercynite Clinker

Special grade bauxite and roll scale were used as raw materials to investigate the influences of reducing atmosphere and firing temperature on sintering clinker. The results showed that: 1) The mixture of the materials could be sintered enough to synthesise hercynite under reducing atmosphere by adding reducing reagent ; 2) The hercynite dinker could be sintered to high density and the content of FeAl2O4 may attain 80～90% under the firing tempera-ture of 1550℃.